Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Before
After
Before
After
Before
AfterHorizontal Roller & Sliding Impact Windows in Westgate, FL
Horizontal roller and sliding impact windows give Westgate homeowners the smooth, space-saving operation of a traditional gliding sash combined with the full hurricane protection of laminated, impact-rated glass. A properly installed unit meets Miami-Dade NOA and Florida Building Code standards, so your home is shielded during a Category 4 storm the same day you enjoy the cross-breeze on a calm October morning. At Winslow Windows & Doors, Ed Winslow has been installing these windows across Westgate and the surrounding Palm Beach communities since 2011 – and every single job carries our Done Right Promise.
If you’re ready to talk options, call us at (561) 468-6136 – a live person picks up around the clock, no voicemail, no call centers. Or read on to understand exactly what you’re getting before you make any decision. Our full scope of hurricane protection work lives under our Impact Windows & Doors in Westgate page, where you’ll find the bigger picture of what we do for this neighborhood.
When You Need Horizontal Roller & Sliding Impact Windows
Not every home is a candidate for casement or double-hung windows. Horizontal rollers and sliders solve specific problems – and in Westgate, we see these situations constantly.
- Wide, low openings in block-construction homes. Many Westgate homes built in the 1970s and 1980s have wide horizontal rough openings – especially in living rooms and rear Florida rooms – where a sliding unit is simply the correct architectural fit. Forcing a double-hung into that space usually means extra framing cost and a less secure installation.
- Existing sliders that fail the wind-load test. Single-pane sliding windows from that same era are rated for little more than a moderate thunderstorm. When Westgate gets clipped by a tropical system tracking up from the Keys, those frames flex, the seals blow, and water follows. Upgrading to impact-rated sliders eliminates that vulnerability without changing the window’s footprint.
- A room where you want ventilation without giving up storm protection. Horizontal rollers let you slide one panel open for airflow and still keep the fixed impact pane doing its job. Homeowners on Westgate Drive who face the afternoon southwest wind often specifically request this configuration for master bedrooms and sunrooms.
- Insurance premium pressure. Florida insurers have been aggressive about surcharges on non-impact openings. Installing impact-rated horizontal sliders across all qualifying openings is one of the most direct ways Westgate homeowners reduce their windstorm premium – sometimes enough to offset a meaningful portion of the installation cost within a few policy cycles.
- Noise from nearby traffic or a busy street. The laminated interlayer in impact glass also acts as a sound barrier. Homes near the commercial corridors along State Road 80 or close to the Turnpike interchange notice a real drop in ambient road noise after we switch out the old single-pane sliders.
- Planning a room addition or Florida room enclosure. If you’re adding square footage with a lanai conversion or a bumped-out bedroom, the permit process in unincorporated Palm Beach County requires all new window openings to meet current impact standards. Starting with the right product from day one avoids a costly correction later.
Our Horizontal Roller & Sliding Impact Windows Process
We don’t show up, pull a number, and hand the job to a subcontractor you’ve never met. Ed Winslow built this company around the idea that homeowners deserve to know who is in their home and what’s happening at every stage. Here’s how a typical horizontal roller or sliding impact window project moves from your first call to a finished, permitted installation.
- Free in-home measure and assessment. One of our background-checked, uniformed technicians visits your Westgate home to measure every opening precisely. We note the frame condition, check the rough opening dimensions, look at the wall construction, and flag anything that could affect the installation – things like old putty glazing that needs to come out or a sill that isn’t level. There’s no trip charge inside our home county, and you’ll receive upfront pricing before we leave.
- Product selection and order. Based on your openings and your priorities – impact rating, Low-E glass for energy performance, frame color, screen options – we specify the right unit from our authorized product lineup. For horizontal rollers and sliders, we most often work with PGT and CGI, both of which have a strong track record in South Florida’s heat and humidity. We place the factory order and give you a lead-time estimate in writing.
- Permit pulling. We handle the permit application with Palm Beach County (or the applicable municipality if your parcel sits inside an incorporated boundary). You don’t have to navigate the building department. We submit the product NOA documentation, the signed and sealed drawings when required, and track the approval. In our experience with Westgate-area permits, straightforward residential replacements typically clear the review desk in one to three weeks.
- Removal and preparation. On installation day, our crew removes the existing windows carefully, protecting your interior finishes. Old frames and glass are disposed of – we don’t leave debris in your yard. The rough opening gets cleaned, checked for moisture intrusion, and shimmed or reinforced if needed before the new unit goes in. This step is where shortcuts happen on cheap jobs; we don’t take them.
- Impact window installation and waterproofing. The new horizontal roller or slider is set, anchored per the approved drawings, and sealed with the correct flashing tape and silicone system. We test every panel for smooth operation and confirm the locking mechanism meets Florida’s forced-entry resistance requirements.
- Inspection and punch-out. We schedule the required building department inspection and meet the inspector on site. After it passes, we do our own final walk-through with you, confirm the rollers glide correctly, demonstrate the lock, and make sure you’re satisfied before we close out the job. If anything is off, we fix it before that conversation ends – that’s what the Done Right Promise actually means in practice.
Horizontal Roller & Sliding Impact Windows Pricing in Westgate
Sliding and horizontal roller impact windows in Westgate typically run between $450 and $950 per window, installed, depending on the size of the opening, the glass package you choose, and the condition of the existing frame. Larger openings – say, a 96-inch-wide slider in a Florida room – can push past that range, while standard bedroom-sized units usually land in the middle of it. The table below reflects what we see most commonly in this market.
| Opening Type / Size | Estimated Installed Cost (Westgate) |
|---|---|
| Small horizontal roller (up to 36″ wide) | $450 – $600 |
| Standard sliding window (36″ – 60″ wide) | $600 – $800 |
| Large slider / Florida room (60″ – 96″ wide) | $800 – $1,200+ |
| Frame replacement (significant rot or damage) | Add $150 – $350 per opening |
| Permit fee (Palm Beach County residential) | Typically $75 – $200, pulled by Winslow |
Several factors move the final number. Low-E glass with a Solar Heat Gain Coefficient suited to Westgate’s west-facing afternoon sun will add to the glass cost but typically pays back in reduced cooling bills. Homes with single-wythe concrete block sometimes need a buck frame or sub-frame, which adds labor. If we find moisture damage behind an old aluminum frame – not uncommon in homes that have been sitting on single-pane sliders for twenty years – we’ll show you the problem and price the repair before any additional work begins. No surprises on the invoice.
Repair calls over $200 qualify for $40 off, seniors and veterans receive a standing 10% discount, and if another company has already given you a written estimate, we’ll provide a free second opinion. Call (561) 468-6136 to schedule your free measure – a real person will answer.
Why Westgate Homeowners Choose Winslow Windows & Doors
Westgate sits in a part of Palm Beach County that doesn’t get as much contractor attention as the coastal towns, but the storm exposure is just as real. A squall that forms in the Glades can push southeast across western Palm Beach County with very little warning, and homes here are as vulnerable to wind-driven rain intrusion as anything on the Intracoastal. We’ve been working in this neighborhood long enough to know the common failure points: corroded aluminum frames on 1980s CBS homes, jalousie conversions that were never properly sealed, and slider tracks that haven’t been maintained and are now a structural weak spot.
Ed Winslow started this company in 2011 as an owner-operated alternative to the large installation firms that treat Westgate like a side route between bigger zip codes. His name is on the business, on the license, and effectively on every window we touch. That’s not a marketing line – it’s the reason the Done Right Promise is unconditional. If an installation isn’t right, we come back and make it right, full stop.
We’re authorized installers for PGT, CGI, and ViewLux, among others, which means we have direct relationships with the manufacturers and access to warranty support that third-party installers can’t offer. Every technician who comes to your door is background-checked, arrives in a marked uniform, and knows the job before they start – you’ll know their name before the truck pulls up.
Key Takeaways
- Horizontal roller and sliding impact windows typically cost $450 – $950 installed in the Westgate market, with larger openings running higher.
- Winslow Windows & Doors has been serving Westgate since 2011, locally owned by Ed Winslow with a published license number.
- We pull all permits, handle the Palm Beach County inspection, and don’t subcontract the install crew.
- Every job is backed by the Done Right Promise – if it’s not right, we fix it.
- Live 24/7 phone answer at (561) 468-6136 – no voicemail, no callback queue.
- Standing discounts: $40 off repairs over $200, 10% for seniors and veterans, free second opinions on written estimates.
FAQs – Horizontal Roller & Sliding Impact Windows
How much do horizontal roller and sliding impact windows cost in Westgate?
Horizontal roller and sliding impact windows in Westgate run roughly $450 to $950 per opening, installed, for standard residential sizes. Larger openings – particularly wide Florida room sliders common in older Westgate block homes – can exceed $1,200 per unit when framing work is involved. The exact number depends on the opening dimensions, the glass package (standard laminated versus Low-E), and the condition of the existing frame and rough opening. We provide upfront pricing after a free in-home measure – no estimates over the phone that fall apart on install day. Call (561) 468-6136 to schedule, and the quote costs you nothing.
Do sliding impact windows meet Florida’s hurricane code for Westgate?
Yes – every sliding and horizontal roller impact window we install carries a Miami-Dade Notice of Acceptance (NOA) and meets Florida Building Code wind-load requirements for Palm Beach County’s design pressure zone. We submit the NOA documentation as part of the permit package, and the installation is inspected by the county building department before the job is closed out. You’ll receive a copy of the passed inspection, which is what your insurance carrier needs to update your policy and potentially reduce your windstorm premium.
Can I keep the same rough opening size when I replace old sliders with impact windows?
In most cases, yes. Horizontal roller and sliding impact windows are manufactured to fit standard rough opening dimensions, so a replacement project typically doesn’t require structural changes. The main exceptions are openings that have shifted over time in older CBS construction, situations where the existing buck frame is rotted and needs to be rebuilt, or cases where a homeowner wants to change the window configuration at the same time. We identify any of these issues during the free initial measure and price accordingly before any work begins.
How long does a horizontal roller or sliding impact window installation take in Westgate?
For a typical Westgate home replacing four to eight sliding or horizontal roller windows, the physical installation runs one to two days once the permit is approved and the windows arrive from the factory. Permitting with Palm Beach County for a straightforward residential replacement generally takes one to three weeks from application to approval. We order the windows after the permit is in hand, so the practical lead time from your signed contract to completed installation is usually four to six weeks, though this can vary based on the current factory schedule. We keep you updated throughout – no radio silence while you’re waiting.
Ready for a Free Estimate in Westgate?
If your existing sliders are single-pane, corroded, or just not doing what a window in Westgate should do during storm season, a conversation with us costs nothing. Call (561) 468-6136 right now – someone will answer. Ed Winslow and the Winslow Windows & Doors crew have been the locally owned option in this part of Palm Beach County for over 15 years, and we’re not going anywhere. We’ll measure your openings, give you straight pricing, pull your permit, and install the right window the first time. And if anything’s ever not right, you know exactly who to call – and they’ll pick up.
For the full scope of hurricane-rated window and door work we do in this area, visit our home page or explore everything under Impact Windows & Doors in Westgate.
Written by Ed Winslow, Owner at Winslow Windows & Doors, serving Westgate.
Six Reasons Homeowners Choose Winslow Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.