Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Before
After
Before
After
Before
AfterENERGY STAR Replacement Windows in Westgate, FL
Energy-Efficient Windows certified by ENERGY STAR meet strict federal efficiency thresholds set by the EPA – in Florida’s hot, humid climate, that means low-solar-gain glass, tight frame seals, and U-factors low enough to keep your air conditioner from running nonstop. For most Westgate homes, a full replacement project runs between $450 and $1,100 per window installed, and the work can often be completed in a single day depending on window count and accessibility. If your current windows are fogging up between the panes, letting in road noise from the Turnpike, or costing you more in FPL bills than they should, ENERGY STAR-rated replacements are the most direct fix.
At Winslow Windows & Doors, Ed Winslow has been installing replacement windows in Westgate since 2011. We’re an authorized installer for PGT and CGI – two of the brands that define energy-certified, impact-rated performance in South Florida – and every job we take on is backed by our Done Right Promise. If something isn’t right, we come back and make it right. That’s not a slogan; it’s how Ed runs the business. Call us at (561) 468-6136 any time, day or night, and a real person will pick up.
This page sits under our broader Energy-Efficient Windows in Westgate service, which covers the full range of efficiency upgrades we offer – but if ENERGY STAR certification is the specific outcome you’re after, you’re in the right place.
When You Need ENERGY STAR Replacement Windows
Not every window problem is obvious. Some of the clearest signs that it’s time to replace with certified units are subtle until you get your monthly utility statement. Here’s what Westgate homeowners typically describe when they call us:
- FPL bills that spike every June through September. Older single-pane or low-grade double-pane windows bleed conditioned air constantly. ENERGY STAR windows in Florida’s Southern climate zone must meet a Solar Heat Gain Coefficient (SHGC) of 0.25 or lower – a threshold that meaningfully cuts the radiant heat load your AC fights all summer.
- Condensation or foggy glass between the panes. When the inert gas fill (typically argon) escapes a double-pane unit, the insulating dead air is gone and moisture infiltration follows. This is common in Westgate homes built in the 1980s and early 1990s with original aluminum frames, and it’s not fixable by resealing – the unit needs replacement.
- Drafts or humidity getting in around the frame. Westgate sits in western Palm Beach County, and summer humidity here is relentless. If you can feel warm, sticky air around a closed window, the frame seal has failed. ENERGY STAR-qualified frames – whether vinyl, fiberglass, or thermally broken aluminum – are engineered to hold those seals over years of thermal expansion and contraction.
- Noise from nearby traffic or the Sawgrass Expressway corridor. This is a common complaint we hear specifically from Westgate homeowners. A certified replacement window with laminated or insulated glass layers noticeably reduces outdoor noise intrusion, which is a byproduct of the same construction that makes these windows energy-efficient.
- Your home doesn’t meet current Florida Building Code for impact resistance. Many Westgate properties upgraded insulation and roofing after the 2004-2005 storm seasons but still have original windows. Pairing ENERGY STAR certification with impact-rated glazing – which PGT and CGI both offer – satisfies both the energy and wind-load requirements in a single replacement.
- You’re planning to list the home or refinance. Appraisers and buyers in the Westgate market increasingly treat ENERGY STAR windows as a documented upgrade, similar to a new roof. Having the certification paperwork in hand – which we provide – gives you a concrete selling point rather than a vague claim about “upgraded windows.”
Our ENERGY STAR Replacement Windows Process
We don’t believe in surprises on installation day. Here’s exactly how a replacement window project moves from your first call to a finished, certified installation:
- Free in-home measurement and assessment. Ed or one of our background-checked technicians comes to your Westgate home, measures every opening, checks the existing frame condition, and identifies any structural or moisture issues that could affect the new installation. There’s no trip charge for Westgate visits, and the estimate is written and itemized – no verbal ballpark figures that change later.
- Product selection and ENERGY STAR verification. We walk you through the certified options that fit your openings, your budget, and Florida’s Southern climate requirements. For most Westgate homes, we’re typically looking at CGI or PGT units with low-E coatings and argon fill – products we’re authorized to install and that carry their own manufacturer warranties in addition to our 36500-Day Promise. We confirm ENERGY STAR certification on every unit before it’s ordered, because that label has to be on the product itself to count for Florida rebate programs.
- Permit coordination. Palm Beach County requires permits for window replacements that change the size or structural framing of an opening. We handle the permit application and scheduling with the county – you don’t have to navigate that process yourself. For like-for-like replacements in the same rough opening, permit requirements are simpler, but we verify the correct path for your specific project before any work begins.
- Installation day. Our uniformed, background-checked crew removes the existing windows carefully to avoid damaging interior finishes where possible, preps the opening, installs the new certified units, and seals and flashes the frames to Florida Building Code standards. We don’t subcontract installation to whoever’s available that week – the team that shows up is our team.
- Inspection and cleanup. After installation, every window is tested for operation, seal integrity, and proper locking function. We walk through the results with you before we leave, point out any items to watch during the first season, and leave the space cleaner than we found it. If a county inspection is required, we schedule and attend it.
- Documentation and warranty package. You receive the ENERGY STAR certification documentation for each product installed, the manufacturer warranty information, and a written record of our Done Right Promise – everything you’d need for a homeowner’s insurance review, a home sale, or a utility rebate application.
ENERGY STAR Replacement Windows Pricing in Westgate
ENERGY STAR replacement windows in Westgate typically cost between $450 and $1,100 per window, fully installed. That range is wide because several variables move the number significantly. Here’s a straightforward breakdown:
| Window Type / Scenario | Estimated Installed Cost (Per Window) |
|---|---|
| Standard single-hung, like-for-like replacement (vinyl frame) | $450 – $650 |
| Double-hung or casement, mid-grade certified unit | $550 – $750 |
| Impact-rated ENERGY STAR unit (PGT or CGI) | $700 – $950 |
| Large picture or sliding window, impact-rated certified | $850 – $1,100 |
| Whole-home replacement (10+ windows, standard openings) | Multi-window discount applied – call for project quote |
What moves the price up: frame material (vinyl is the most affordable; thermally broken aluminum runs higher), glass package (standard low-E vs. insulated laminated glass), opening size, second-floor or difficult-access locations, and whether structural reframing is needed around the rough opening.
What can bring your net cost down: FPL and local utility rebate programs sometimes apply to ENERGY STAR-certified replacements – we provide the product documentation you’d need to apply. If your project total is over $200, our standing $40 off any repair or service over $200 offer applies. Seniors and veterans receive a permanent 10% discount on all work, no expiration. And if you’ve already received a written estimate from another company, our free second opinion could save you more than either discount.
We don’t do ballpark quotes over the phone without seeing the home. Call (561) 468-6136 to schedule your free in-home estimate – it costs nothing, and the written quote we leave you is yours to keep and compare.
FAQs – ENERGY STAR Replacement Windows
What makes a window actually ENERGY STAR certified in Florida?
A window is ENERGY STAR certified for Florida when it meets the EPA’s Southern climate zone performance thresholds – currently a U-factor of 0.40 or lower and a Solar Heat Gain Coefficient (SHGC) of 0.25 or lower. These numbers are independently tested and verified, not self-reported by the manufacturer. The certification label must appear on the product itself, not just on the brochure. When we order your windows, we confirm these ratings on the specific unit being shipped to your Westgate home before installation. Call (561) 468-6136 if you’d like to talk through which certified options fit your openings and your budget.
How long does a full window replacement take in Westgate?
Most single-family Westgate homes with six to twelve standard windows can be fully replaced in one day, sometimes two if access is complex or a county inspection falls mid-project. The longest part of the timeline is typically the product lead time between when you place your order and when the windows arrive from the manufacturer – that typically runs two to four weeks depending on the brand and configuration. We schedule installation for the day after delivery confirmation so there’s no delay once your windows are on site. The in-home estimate and permit coordination happen in parallel with the order, so nothing waits on anything else unnecessarily.
Is it worth getting impact-rated glass at the same time as ENERGY STAR certification?
For Westgate homeowners, yes – in most cases it makes financial and practical sense. Florida Building Code requires impact protection or approved shutters on window openings in wind-borne debris regions, and western Palm Beach County falls under those requirements. Replacing with a unit that’s both ENERGY STAR certified and impact-rated – like the CGI and PGT lines we install, with solar and tinted glass options available – satisfies both requirements in one installation, eliminates the need for shutters on those openings, and may qualify your home for a homeowner’s insurance discount. Doing two separate projects to achieve the same result almost always costs more in total labor than doing it once. Ask us to run both numbers when we come out for your estimate.
Can ENERGY STAR windows lower my FPL bill noticeably in Westgate?
Yes, though the exact savings depend on how inefficient your current windows are. Homes in Westgate with original single-pane aluminum windows from the 1980s – which we see regularly in the older subdivisions off Haverhill Road – can see meaningful reductions in cooling load after replacing with certified low-E and argon gas glass units. The EPA estimates residential energy savings of around 12% on heating and cooling costs on average nationally, but in a high-solar climate like Westgate’s, where air conditioning runs seven to eight months a year, the savings window is broader. The certified documentation we provide also supports any rebate application through FPL’s home efficiency programs. Call (561) 468-6136 and we’ll walk through what’s realistic for your specific home.
Why Westgate Homeowners Call Winslow
Ed Winslow started this business in 2011 with a straightforward premise: do the job right the first time, put your name on it, and be reachable when something needs attention. That’s still how we operate. We’re not a call center routing your project to whoever’s available in a region – we’re a locally owned company with a published address and license number, authorized by PGT, CGI, and others to install the products we sell, and personally accountable through the Done Right Promise.
Every technician who comes to your Westgate home is background-checked and arrives in a Winslow uniform. You know who’s at your door before the truck pulls up. Pricing is written and upfront – no verbal estimates that shift after the deposit. And when you call, a live person answers. At 2 p.m. or 2 a.m., that doesn’t change.
If you’ve dealt with national chains that handed you a ticket number and a window of three weeks, or local crews that disappeared after the deposit cleared, we understand why you’re cautious. Ed’s name is on this business, and on every job we do. That’s not a marketing line – it’s the accountability structure that’s kept us working in Westgate and the surrounding communities for over 15 years.
We also serve homeowners looking for broader home exterior upgrades beyond windows – if you’re weighing a full exterior project that includes doors or roofing alongside your window replacement, we can assess the whole scope in a single visit and quote it together.
Key Takeaways
- ENERGY STAR certified replacement windows in Westgate must meet Florida’s Southern climate zone ratings – U-factor of 0.40 or lower and SHGC of 0.25 or lower.
- Installed cost typically runs $450 to $1,100 per window depending on type, glass package, and access conditions.
- Pairing ENERGY STAR certification with impact-rated glass (PGT, CGI) satisfies both energy and wind-load requirements in one project.
- Winslow Windows & Doors handles permit coordination, installation, inspection attendance, and certification documentation – you don’t manage the paperwork.
- Standing discounts include $40 off projects over $200, 10% for seniors and veterans, and a free second opinion on any written estimate.
- Every project is backed by the Done Right Promise – if it’s not right, we come back.
- Call (561) 468-6136 any time – a live person answers 24 hours a day, 7 days a week.
Get Your Free ENERGY STAR Window Estimate in Westgate
If you’re ready to stop guessing at what efficient replacement windows would cost for your Westgate home, call (561) 468-6136 today. We’ll schedule a free in-home measurement and walk away with a written, itemized estimate – no pressure, no obligation, no trip charge. If you already have a written quote from another installer, bring it out and we’ll give you a free second opinion on it. Ed’s word backs every estimate and every installation we do.
Written by Ed Winslow, Owner at Winslow Windows & Doors, serving Westgate.
Six Reasons Homeowners Choose Winslow Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.