Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Before
After
Before
After
Before
AfterSliding Glass & Patio Doors in Westgate, FL | Winslow Windows & Doors
Sliding glass and patio doors are the centerpiece of a Florida home. They connect your living room to the lanai, flood the interior with natural light, and, in Westgate, they have to do all of that while standing up to hurricane season. Winslow Windows & Doors installs impact-rated sliding glass door systems across Westgate, engineered to the same wind-zone design pressure as our window lines. We carry PGT, CGI, CWS, ES Windows, ECO, and Mr-Glass configurations, and we install every unit to HVHZ standards. If you’re planning a door replacement or new construction opening, call (561) 468-6136 to schedule a free on-site measurement.
Product Overview - Sliding Glass & Patio Doors
The sliding glass door profile we install most often in Westgate is a large-span impact system: laminated glass panels riding on a reinforced track, built to the same wind-zone design pressure as our window lines. This isn’t a standard patio door with impact glass swapped in as an afterthought. The track, interlock, rollers, and frame are all engineered together so the entire assembly carries wind load as one unit.
Why does that matter here specifically? Westgate sits in Palm Beach County, where the Florida Building Code High-Velocity Hurricane Zone provisions govern most residential openings. A sliding glass door is the largest single opening in most homes, which means it takes the most wind pressure and the most debris impact. When we specify a door for a Westgate project, we look at the exact wind zone, the elevation, and whether the opening faces the coast or sits inland. Then we match the frame, glass, and track configuration to that specific exposure, never over-specifying design pressure beyond what the zone requires.
Architecturally, these doors work in nearly every Westgate home style, from mid-century ranches in original neighborhoods to newer Mediterranean-influenced builds with covered lanais. Two-track and three-track configurations let you decide between a wider glass area per panel or more ventilation area when the door is open. The common element is the clean sightline: large laminated glass panels that hold the frame together under impact and keep the interior quiet on windy days.
Technical Specifications
Here’s what Winslow Windows & Doors can configure for your Westgate project. Every spec below is matched to your opening size, wind zone, and architectural style.
| Specification | Options & Description |
|---|---|
| Frame Materials | Aluminum (standard for coastal durability), Vinyl (when thermal performance and lower maintenance are priorities) |
| Maximum Size | Up to 12 feet wide per panel span, depending on configuration and design pressure |
| Track Configurations | 2-Track (two panels, one sliding), 3-Track (three panels, two sliding for maximum opening) |
| Glass Options | Laminated Impact Glass (PVB interlayer), Low-E Insulated Glass, Tinted Glass, Clear Glass |
| Finish Colors | White, Almond, Bronze, Black, Tan |
| Screen Options | Retractable Screen, Sliding Screen |
| Compliance Documentation | Miami-Dade NOA and Florida Product Approval numbers provided per configuration, issued for your specific quote |
We keep these options in regular rotation because they cover ninety percent of what Westgate homes actually need. The three-track configuration is particularly common here when homeowners want better cross-ventilation during the October-to-May stretch when the AC isn’t running full-time.
Hurricane & Compliance Performance
Laminated Impact Glass - The two panes of glass are bonded with a PVB (polyvinyl butyral) interlayer. If debris strikes the door, the glass may crack but it stays in the frame. That keeps the wind from entering the home, which is what causes catastrophic roof and wall failures in a storm.
Miami-Dade NOA / Florida Product Approval - Each door configuration carries a Notice of Acceptance from Miami-Dade County and a Florida Product Approval number when applicable. These are issued per configuration, meaning the specific size, glass, and frame combination on your quote has been tested and approved. We provide the documentation with your permit submittal.
Florida Building Code HVHZ Compliance - The product is engineered to Florida Building Code High-Velocity Hurricane Zone requirements. For any home in Westgate, this is the baseline. If the door doesn’t meet HVHZ, your permit won’t clear, and frankly, you shouldn’t install it.
TAS 201 / TAS 202 / TAS 203 Testing Context - These are the testing protocols HVHZ-rated products are evaluated under. TAS 201 covers large-missile impact. TAS 202 covers cyclic wind-pressure loading, meaning the door is hit with repeated pressure cycles that simulate a hurricane. TAS 203 covers forced-entry resistance. A door that passes this family of tests has earned its rating.
Design Pressure Matched to Your Wind Zone - Design pressures are matched to your specific wind zone, up to +/-100, never higher. We don’t sell you more door than your house needs. If your opening is in a moderate zone, you get that rating. If coastal exposure pushes the requirement toward the top of the range, we configure accordingly. You see the exact number on your quote.
Low-E / Insulated Glass Options - For Westgate homes that get direct afternoon sun, Low-E insulated glass adds meaningful heat rejection. It’s worth considering on west-facing openings, where a clear glass door can turn a living room into a greenhouse by 4 PM in July.
Color & Glass Options
Westgate’s housing stock runs from original 1970s and 80s builds to more recent stucco and barrel-tile construction. The finish of your sliding glass door should fit that context, not fight it. White remains the most common choice for traditional Florida homes because it disappears into light-colored stucco and keeps the frame cooler. Almond softens the visual transition on homes with warmer beige tones. Bronze and black are increasingly popular on modern and contemporary renovations where the door frame becomes a design element, and they hide dirt better on high-traffic tracks. Tan bridges the gap for Mediterranean-style homes with earthier exterior palettes.
On glass, clear laminated impact is the starting point. It gives you the purest view outside and the full impact rating. Tinted glass reduces glare, which matters on doors facing east or west in Westgate. Low-E insulated glass is the choice for a door that gets relentless sun exposure and you want the room to stay visibly cooler. For bedrooms or pool-facing lanai doors, many Westgate homeowners also ask about the balance between visible light and privacy, and we can walk you through which tint levels feel right before you commit. Glass samples show up in our van, and you’ll pick from physical swatches, not a screen.
Installation by Winslow Windows & Doors in Westgate
The best impact-rated sliding glass door in the world is only as good as its installation. A door that’s out of plumb by an eighth of an inch will bind and wear out rollers prematurely. A perimeter that isn’t sealed to AAMA 812 standards with low-expansion foam will leak. In Westgate, where summer storms dump an inch of rain in twenty minutes, a leaky door frame is a mold problem waiting to happen.
Our installation process begins with a pre-install inspection. We measure the opening three ways: width at top, middle, and bottom; height at both jambs; and we check the floor for slope. Then we verify the existing framing and flashing condition. If there’s rot or water damage, we flag it before we start, not mid-install when the opening is bare.
We set every door level, plumb, and square, with the track bedded flat so the rollers glide without resistance. The perimeter gets a continuous AAMA 812 low-expansion foam sealant around the full frame, applied per AAMA 2400/2410 installation practice, so there are no gaps at the head, jambs, or sill. After the panels are hung and adjusted, we run a final water test and walk the door with you so you can see it slide before we clean up.
Permitting matters in Palm Beach County. If your Westgate project goes through the building department, the permit package will require the Miami-Dade NOA or Florida Product Approval documentation for the specific door you ordered. We handle that paperwork as part of our scope. Improper installation compromises an NOA-rated system, which is exactly why HVHZ jurisdictions like ours scrutinize who’s doing the work and what they’re putting in.
Frequently Asked Questions - Sliding Glass & Patio Doors
Design pressure is matched to the wind zone of your specific Westgate home, up to +/-100, never higher. When we quote your project, we calculate the required rating based on the opening’s location, orientation, and elevation, then match the frame, glass, and track configuration to that number. Call (561) 468-6136 and we’ll verify your zone during the free on-site measurement.
Lead time depends on the manufacturer, glass package, and finish you select. Common PGT, CGI, and Mr-Glass configurations usually run several weeks from order approval to delivery in Westgate. When you place your order, we give you a real date range, and we’ll keep you updated if anything moves.
Yes, in most Westgate permit applications, the building department will ask for the NOA or Florida Product Approval documentation that matches the exact door configuration on your order. These numbers are issued per configuration, and we provide them with your permit package so there’s no hold-up at plan review.
Within the product constraints, yes. Maximum width is up to 12 feet per span. Track configurations are available in 2-track and 3-track, glass can be selected from impact laminated, Low-E insulated, tinted, or clear, and finishes come in white, almond, bronze, black, and tan. We’ll confirm what’s workable for your specific opening during the measurement.
Clean the track with a vacuum or soft brush every couple of months to keep sand and grit out of the rollers. In Westgate’s coastal air, a quarterly rinse of the frame and glass with mild soap and water prevents salt buildup. We can show you exactly what to check during installation and we’re a phone call away if anything feels off down the road. Call (561) 468-6136 with maintenance questions anytime.
Get a Quote - Sliding Glass & Patio Doors in Westgate
The best way to start a door project in Westgate is with a free on-site measurement. We’ll look at your opening, talk through glass and finish choices, and give you a written line-item quote with no surprises. Call Winslow Windows & Doors at (561) 468-6136 to schedule yours.
Written by the team at Winslow Windows & Doors, serving Westgate, FL and surrounding Palm Beach County communities.
Six Reasons Homeowners Choose Winslow Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.
Other Winslow Windows & Doors Services
What Neighbors Say About Winslow Windows & Doors
Detailed Images
