Casement Windows

Casement Windows in Westgate, FL | Winslow Windows & Doors

Casement windows are side-hinged and crank-operated, and in Westgate, FL they do two jobs at once: they open wide for coastal breezes and they seal tight when the wind turns hostile. We install impact casements from our PGT, CGI, CWS, ES Windows, ECO, and Mr-Glass lines, matched to your wind zone and your home’s architecture. Winslow Windows & Doors has built its reputation in Westgate on installations that hold up to Florida Building Code scrutiny. If you’re researching casement windows for a new build, a remodel, or a storm-hardening upgrade, call us at (561) 468-6136 for a free on-site measurement.

Call (561) 468-6136

Product Overview - Casement Windows

Casement windows are the workhorse profile for Florida homes that need real ventilation without giving up storm protection. Unlike sliding windows that rely on overlapping tracks, a casement uses a full compression seal: when you crank the sash closed, the entire perimeter presses into the frame. That’s what gives you the airtight closure and makes the design so well suited to hurricane-prone construction in Westgate, FL.

The hardware mounts on the side, so the sash swings outward like a door. That outward swing catches breezes and directs them into the room, which makes casements a favorite for bedrooms, kitchens, and living areas where Westgate homeowners want air moving on still afternoons. When fully open, there’s no center mullion or vertical bar blocking the view. You get an unobstructed opening from sill to header.

We offer impact casements in aluminum and vinyl. Aluminum gives you the slimmest sightlines and the highest structural rigidity. Vinyl brings thermal performance and a lower-maintenance profile, and it holds up well in the salt air near Westgate’s coastal zones. Both frame materials are engineered around laminated impact glass, which is the real heart of the system.

This is a window profile that shows up everywhere in Florida architecture, from 1970s ranch homes being hardened after decades of exposure to new Mediterranean-style builds going up around Westgate. It works in stucco walls, CBS block, and wood-frame construction. And because the crank mechanism gives you mechanical leverage, the sash actually seals tighter than a sliding panel that just rests in its track.

Technical Specifications

The configurable specs below give you the full picture of what we order and install for Westgate homes. Everything gets matched to your opening size, your wind zone, and your finish package before we quote.

• Frame materials: Aluminum or vinyl, selected for the wall depth and exposure of your Westgate home.
• Glass options: Laminated impact glass (PVB interlayer), Low-E insulated glass, tinted glass, and clear glass. Insulated and Low-E configurations can be combined with laminated impact in most lines.
• Finish options: White, almond, bronze, black, and tan. Finish availability depends on frame material and product line.
• Screen options: Fixed screen or retractable screen, both sized to the casement swing.
• Operation: Side-hinged crank with full-perimeter compression seal when closed.
• Sill profiles: Standard and high-performance sill options available per line, chosen to shed water away from the interior.
• Design pressure: Matched to your wind zone, up to +/-100. We never specify a higher DP than your structure requires.

Hurricane & Compliance Performance

Laminated Impact Glass - The glass package uses a PVB (polyvinyl butyral) interlayer sandwiched between panes. Under impact, the glass may fracture but the interlayer holds the fragments in the frame. That’s the mechanism that keeps wind, rain, and debris out of your Westgate home during a storm event. It’s the same concept used in automotive windshields, scaled for residential window loads.

Miami-Dade NOA / Florida Product Approval - The configurations we quote carry Miami-Dade Notice of Acceptance and Florida Product Approval numbers, issued per configuration. That means the specific size, glass package, and frame combination has been evaluated as a system. The number for your exact configuration gets verified on your quote, so your permit submittal in Westgate is clean.

FBC / HVHZ Compliance - These casement windows are engineered to Florida Building Code High-Velocity Hurricane Zone requirements. HVHZ applies to Palm Beach County and other coastal regions, and the testing standard is more demanding than the general FBC wind-load path. If your Westgate property falls in an HVHZ jurisdiction, this is the compliance baseline you need.

TAS 201 / 202 / 203 Testing Context - HVHZ-rated products are tested under a protocol family that includes TAS 201 for large-missile impact, TAS 202 for cyclic wind-pressure loading, and TAS 203 for forced-entry resistance. TAS 201 fires a lumber missile at the window and checks for penetration. TAS 202 cycles pressure thousands of times to simulate hurricane gusts. TAS 203 verifies the assembly resists forced entry after impact testing. This is the testing gauntlet behind the approvals.

Design Pressure for Your Wind Zone - We match design pressure to your wind zone, up to +/-100, and never higher. Over-specifying a DP rating doesn’t make a window safer; it just adds weight and cost. Under-specifying is a code failure. We calculate the required rating from your Westgate property’s exposure category, mean roof height, and opening dimensions, then order the configuration that meets it exactly.

Energy Performance - Low-E and insulated glass options are available for these casement windows. Low-E coatings reduce solar heat gain, which matters on west-facing elevations in Westgate that bake all afternoon. Insulated glass adds a second airspace for better thermal separation between inside and outside. Both options can be layered with the laminated impact glass, so you don’t choose between storm protection and energy performance.

Color & Glass Options

Finish selection for Westgate homes usually comes down to architecture. White and almond read clean against the stucco and tile-roof palette common in Westgate’s Mediterranean-style neighborhoods. Bronze and black give you contrast, and they’ve become popular on modern builds with darker window trims and larger glass areas. Tan works as a middle ground on homes with earth-tone exteriors, blending the frame into the wall color instead of framing it.

Aluminum frames in Westgate hold dark finishes well because they’re powder-coated and baked on, so bronze and black stay consistent under UV exposure. Vinyl in white, almond, or tan delivers the lowest maintenance profile, and the finish goes through the material rather than sitting on top of it.

Glass comes down to what each room needs. Laminated impact glass is the storm-protection baseline for any opening exposed to wind-borne debris. Tinted glass cuts glare and visible light transmission, which helps on east-facing bedrooms that get morning sun. Low-E insulated glass is the pick for rooms where you’re running air conditioning most of the day, because it reduces the solar load without blocking the view. Clear impact glass remains the default for homeowners who want the truest light and highest visible clarity. We’ll walk through the trade-offs on your quote.

Installation by Winslow Windows & Doors in Westgate

An impact casement window with a Miami-Dade NOA is only as good as its installation. The NOA approval tests the window as a system, but the system assumes correct anchoring, sealing, and flashing in the field. In Westgate, where wind-driven rain and coastal exposure are real variables, a window that’s out of square or under-anchored will leak or fail before the glass ever gets tested by a storm.

Our installation process starts with a pre-install inspection of the rough opening. We check the framing for rot, deflection, and dimensional consistency before we order glass. Once the window arrives, we set it level, plumb, and square. That’s not a nicety. A casement sash that’s racked even slightly out of square won’t compress its perimeter seal evenly, and the compression seal is the entire water-and-air barrier when the window is closed.

We seal the perimeter with AAMA 812 low-expansion foam, which fills the gap between frame and rough opening without bowing the jamb. Flashing and sealant details follow AAMA 2400/2410 installation practice, the standard for field installation of windows in exterior walls. After the window is anchored and sealed, we run a final water test and inspect the operation of the crank, hinge, and lock points.

Permitting in Westgate and the surrounding HVHZ jurisdictions requires product approval submittals to match the window you actually installed. We keep the NOA and Florida Product Approval documentation with the job file and provide what your building department needs. Coastal exposure categories and wind-zone maps determine the design pressure requirements, and we verify those against your specific address before ordering. Every install ends with a cleaned opening, a working window, and documentation ready for inspection.

Frequently Asked Questions - Casement Windows

What wind zone or design pressure is the casement window rated for? These casement windows are matched to your specific wind zone, with design pressures up to +/-100, and we never specify a higher DP than your structure requires. Westgate’s required rating depends on exposure category, roof height, and opening size, which we calculate per opening before quoting.

What’s the lead time on casement windows in Westgate? Lead time runs roughly 6 to 10 weeks for most impact casement configurations, depending on the product line, frame material, glass package, and finish. Custom sizes and dark finishes can add time. We confirm the current lead time when we quote, and we schedule installation based on the arrival window from the manufacturer. Call us at (561) 468-6136 to check current scheduling.

Does my Westgate permit require a Miami-Dade NOA or Florida Product Approval submittal? Yes. HVHZ jurisdictions in Palm Beach County require product approval documentation as part of the permit package for impact windows. Each configuration carries its own NOA or Florida Product Approval number, and we provide the correct submittal documents for the windows you actually purchased, not a generic approval sheet.

Can I customize the size or configuration of my casement windows? Yes. Casement windows are built to your opening dimensions, not pulled from stock. You choose the frame material, glass package, finish, screen type, and sill profile. The only constraint is engineering: the selected configuration must pass the required DP rating for your wind zone, and the approval must cover the size. We’ll tell you if a requested size falls outside an approved configuration.

How do I maintain the casement window frame and hardware? Wash the frame and glass with mild soap and water, and keep the sill track free of sand, salt, and debris, which build up quickly near Westgate’s coastal areas. Lubricate the crank mechanism and hinge points annually with a dry silicone spray, and inspect the perimeter gasket for cracking or compression set. If a crank gets stiff or the sash starts dragging, don’t force it; call us at (561) 468-6136 and we’ll take a look.

Get a Quote - Casement Windows in Westgate

If you’re planning a Westgate storm-hardening project or replacing old casements that don’t seal or crank the way they should, we’ll measure, specify, and quote the right configuration for your wind zone. Every estimate is free, and every quote includes the approval documentation you’ll need for permit. Call Winslow Windows & Doors at (561) 468-6136 to schedule your on-site measurement and get a written, line-item quote.

Written by the team at Winslow Windows & Doors, serving Westgate, FL and surrounding Palm Beach County communities with hurricane-impact window and door installations.