Awning Windows

Awning Windows in Westgate, FL | Winslow Windows & Doors

Awning windows hinge at the top and crank outward from the bottom, which means you can leave them cracked open during a Florida afternoon downpour without water pouring onto your sill. That single design detail is why so many Westgate homeowners choose them for kitchens, bathrooms, and anywhere else they want airflow plus rain protection. At Winslow Windows & Doors, we install awning windows with laminated impact glass in weathertight frames rated for Palm Beach County wind zones, and we’ve done it across Westgate for years. We handle the measurement, the permit paperwork, the installation, and the final inspection. Call (561) 468-6136 to talk through your project.

Call (561) 468-6136

Product Overview - Awning Windows

An awning window is a top-hinged, crank-out window. You turn the handle, the sash pivots outward from the top, and the glass becomes a small canopy that sheds rain away from the opening. In Westgate, where afternoon storms roll through from spring to fall, that geometry matters more than people realize. You get ventilation on days when a horizontal slider would let water in.

The impact series we install uses laminated impact glass as the standard glazing, not as an add-on. Two panes of glass are bonded to a PVB (polyvinyl butyral) interlayer, so if a branch or storm-driven debris hits the window, the glass fractures but stays in the frame. The window doesn’t blow out, and your home envelope stays intact. That’s the whole point of hurricane-impact construction.

Architecturally, awning windows work well in Florida ranch homes, Mediterranean-style builds, and coastal cottages around Westgate. They’re commonly placed above kitchen counters, in bathrooms, in laundry rooms, and as part of window combinations paired with fixed picture windows. Because they can sit wider than they are tall, they fit spaces a casement or double-hung won’t.

Frame materials on the units we install are either aluminum or vinyl. Aluminum is the dominant choice for impact-rated applications in this region because it takes the structural load of a windborne-missile impact without flexing. Vinyl is available for clients who want a lower-maintenance frame and are in areas of Westgate where the specific wind-zone rating allows it. We’ll walk you through which frame type matches your opening size and exposure when we measure.

Technical Specifications

Here’s what you’re choosing from when you spec awning windows with Winslow Windows & Doors in Westgate:

• Frame materials: Aluminum or vinyl, both available in impact-rated configurations where the opening size permits
• Glass options: Laminated impact glass with a PVB interlayer (standard), Low-E insulated glass, tinted glass, or clear glass
• Finish colors: White, almond, bronze, black, and tan
• Screen options: Fixed screen or retractable screen, both mounted inside the interior plane of the window
• Design pressure rating: Matched to the wind zone for your specific Westgate street and elevation, up to +/-100, never higher
• Operation: Crank-out roto gear with a folding handle; multi-point lock engagement at the sill and jambs
• Compliance documentation: Miami-Dade NOA and Florida Product Approval numbers issued per configuration and included with your quote

We don’t publish a one-size-fits-all spec sheet because a NOA depends on the exact combination of frame, glass, size, and hardware. What we’ll give you is the specific product approval documentation for the window you’re actually buying, matched to the address where it’s going in.

Hurricane & Compliance Performance

Laminated Impact Glass
Two sheets of glass are bonded to a PVB interlayer. When something hits the window at storm speed, the glass breaks on the impact side, but the interlayer holds the pane together. The window stays in the frame. That’s the difference between a cracked window and a breached building envelope.

Miami-Dade NOA / Florida Product Approval
Every configuration we install carries either a Miami-Dade Notice of Acceptance or a Florida Product Approval number, issued per exact configuration and verified on your specific quote. In Westgate, your permit office will ask for one of these. We provide it.

FBC / HVHZ Compliance
The windows are engineered to the Florida Building Code High-Velocity Hurricane Zone requirements, which govern all of Palm Beach County. This isn’t a coastal-only standard in Florida. Westgate is inside the HVHZ boundary, and the product documentation reflects that.

TAS 201 / 202 / 203 Testing Context
HVHZ-rated products are tested under a protocol family that includes TAS 201 for large-missile impact, TAS 202 for cyclic wind-pressure loading, and TAS 203 for forced-entry resistance. The product approvals our clients receive reference these tests. We’ll explain what they mean for your specific opening.

Design Pressure for Your Wind Zone
Design pressure on these units is matched to your wind zone, up to +/-100, and never higher than what your location actually requires. We don’t overspec for the sake of a bigger number on a spec sheet. The right DP rating is the one that matches your street and exposure, and it’s documented on the product approval.

Energy Performance Options
Low-E and insulated glass upgrades are available for energy performance. Insulated glass is an option when the opening isn’t required to carry full impact glazing, and Low-E coatings cut solar heat gain on the east and west sides of a Westgate home. We’ll spec what makes sense for each opening.

Color & Glass Options

The five finish options we install most often in Westgate are white, almond, bronze, black, and tan. White and almond are the safe choices for the classic Florida ranch homes and courtyard-style builds common in the area. Black frames have become popular on renovated 1970s and 1980s homes where the exterior trim is going darker and the owners want a more modern contrast line. Bronze reads well on homes with tile roofs and warm stucco tones. Tan matches the sandy, muted palette you see on Mediterranean-inspired exteriors throughout Westgate.

Glass choice depends on the opening. Clear laminated impact glass gives you the cleanest view and is the standard spec for the impact series. Tinted glass cuts daytime heat gain and glare, which pays off on west-facing windows with afternoon sun. Low-E insulated glass is the energy upgrade we recommend for bedrooms and living areas where the air conditioner runs hard from June through September. Fixed screens are standard, but retractable screens are worth considering on awning windows you actually open every day during the cooler months.

Installation by Winslow Windows & Doors in Westgate

The best impact window on paper will fail if it’s installed wrong. That’s not marketing copy. A laminated glass unit is only part of the system. The window, the frame anchors, the perimeter seal, and the rough opening all have to work together for the product approval to mean anything.

Our installation process in Westgate starts with a pre-install inspection of the rough opening. We check the condition of the surrounding framing, we verify the opening dimensions against the product approval for the exact window you ordered, and we identify any water intrusion history before we touch anything. Then we set the window level, plumb, and square. If the unit is racked or bowed during installation, the operable sash will never close right, and the impact rating is compromised.

We seal the perimeter with AAMA 812 low-expansion foam and apply the finish sealant to the exterior flange per manufacturer detail. Our installation practice follows AAMA 2400/2410 standards, which govern proper installation of windows and doors in exterior walls. We’re not just sliding a unit into a hole and screwing it off.

Westgate homes, especially the older ones built before the current code cycles, often have rough openings that have shifted. We deal with that on almost every retrofit project in this area. Coastal exposure also means we pay attention to how the exterior weep system drains and how the sill pan is integrated so water moves away from the opening, not into the wall cavity.

After the window is set and sealed, we do a final water test on the exterior, check the crank operation and locking points, and clean up the job site. Permits in Westgate fall under HVHZ jurisdiction, and we pull them as part of the project. The product approval documentation ready for your permit submittal gets delivered with your quote.

Improper installation is the most common reason a NOA-rated window underperforms during a real storm. It’s also the most common reason a water leak shows up six months after a “budget” install. The window is only as good as the crew that put it in. We stake our name on that.

Frequently Asked Questions - Awning Windows

What wind zone or design pressure is the Awning Windows rated for?
Design pressure is matched to the wind zone for your specific Westgate address, up to +/-100, never higher. Your quote will state the exact DP rating for the configuration we spec, along with the matching Miami-Dade NOA or Florida Product Approval number. Call (561) 468-6136 and we’ll confirm your wind zone from your property address.

What is the lead time for my order?
Lead time depends on the frame material, glass configuration, and finish color you select. Standard configurations typically run several weeks from order to delivery at our Westgate shop, and custom finishes or Low-E insulated combinations can extend that. Once we finalize your measurements and you approve the quote, we give you a written delivery window so you can plan your project schedule.

Does my permit submittal require a Miami-Dade NOA or Florida Product Approval?
Yes. Westgate falls under the High-Velocity Hurricane Zone, and the permitting office will require either a Miami-Dade NOA or a Florida Product Approval number for the exact window configuration being installed. We provide that documentation with your quote and we handle the permit submittal as part of your project. You won’t be chasing paperwork.

Can I customize the size or configuration of my awning windows?
Awning windows are made to order within the approved size range for the frame material and glass you choose. We measure each opening in Westgate individually and match the window to your rough opening, not the other way around. Custom sizes, finish colors, and glass combinations are standard practice for us, and every configuration we order carries its own product approval documentation.

How do I maintain the frame and operator hardware?
For aluminum and vinyl frames in the Westgate coastal environment, wash the frames and tracks with mild soap and water every few months, and flush the weep holes with fresh water. Lubricate the crank operator gears and hinge points with a light silicone spray once a year. Don’t use petroleum-based lubricants on the hardware, and don’t pressure-wash directly at the frame joints. If the crank ever starts binding, call us before forcing it. A binding crank is a $2 part you don’t want to replace with a $200 gear repair.

Get a Quote - Awning Windows in Westgate

If you’re pricing awning windows for a Westgate home, start with a real measurement. We’ll come to the house, check the rough openings, verify your wind zone, and give you a written quote with product approvals included, pricing locked, and no surprises later. Call (561) 468-6136 to schedule your free on-site measurement and estimate. We’re local in Westgate, and we’re the crew who’ll stand behind the install for years to come.

Written by the team at Winslow Windows & Doors, serving Westgate, FL with hurricane-impact windows and doors.