Therma-Tru Roof Repair Nationwide | Winslow Windows & Doors

Therma-Tru Roof Repair in Westgate: What to Know First

Therma-Tru roof repair in Westgate typically runs $340-$980 for most jobs, and we can usually get a tech to your home the same day you call. We’re an independent Therma-Tru service provider - that means we repair the doors, skylights, and roof-penetration components Therma-Tru is known for, without being tied to a manufacturer’s corporate script.

Call (561) 468-6136

If you own a Therma-Tru product in Westgate and you’re seeing water where it shouldn’t be, this page tells you exactly what’s going on, what it costs to fix, and who to call. Ed Winslow opened this company in 2011, and his name is still on the truck and the work. Call (561) 468-6136 for a free estimate, and a live person will pick up - day or night.

How Therma-Tru Products Fail - and How We Fix Them

Therma-Tru builds doors, not shingles - but any penetration in your roof line is a potential leak, and the brand’s entry and patio doors are often the culprit when water shows up under a Westgate roofline. Here’s what we see weekly:

• Therma-Tru Classic-Craft entry doors under an overhang: The door itself holds up, but the rough opening flashing above it fails. Westgate’s wet-season downpours overwhelm a poorly flashed header, and water tracks back into the roof deck. We pull the cap trim, flash the opening with proper peel-and-stick membrane, and reseal it so the next storm doesn’t find the same path.
• Therma-Tru Smooth-Star fiberglass doors with warped weatherstripping: South Florida heat and humidity break down Therma-Tru’s factory weatherstripping faster than the company’s northern ratings assume. When the seal goes, wind-driven rain rides the door gasket upward and wets the ceiling below the roofline. The fix is a full weatherstripping replacement, not caulk over the top - caulk lasts one season here.
• Therma-Tru Slim-Line sliding patio doors under flashing: The top track collects water, and if the weep holes are clogged with pollen and sand (a constant in Westgate), water backs up and spills into the wall cavity and roof transition. We clear the weeps, check the sub-sill pan, and replace the pan flashing if it’s been doing the job too long.
• Therma-Tru Tru-Defense security door frames: The steel-reinforced frame is strong, but the anchor points where it ties into the roof header can loosen over time, especially in older Westgate homes with wood roof framing. That small gap is an open invitation for wind-driven moisture. We reset the anchors, re-shim the frame, and seal the transition properly.
• Therma-Tru skylights and roof window surrounds: On attic-vented Westgate homes, we find cracked curbs and dry-rotted roof sheathing around Therma-Tru roof penetrations. The product didn’t fail - the integration did. We rebuild the curb, lap the underlayment correctly, and get the seal right before the decking needs replacing.

One detail Therma-Tru’s own literature won’t tell you: most of these failures are integration failures, not product failures. The door is good. The flashing, weatherstripping, and pan detailing around it was the weak link. We fix the weak link and leave the door alone.

Our Therma-Tru Roof Repair Process

When you call us about a Therma-Tru roof issue in Westgate, here’s the order of operations:

1. 1
   The call: A live person answers, asks what you’re seeing - water stain, damp drywall, a draft around the frame - and books a time that works for you. No voicemail tag.
2. 2
   The inspection: A background-checked, uniformed tech arrives and does a hands-on check of the door or penetration, the surrounding roof deck, and the flashing. We don’t guess from the driveway. We open things up far enough to see the real failure.
3. 3
   The parts decision: Where warranty is in play, we try OEM first. Where the part failed because of a design mismatch with South Florida weather, we may recommend a better aftermarket seal or flashing detail - and we’ll show you exactly why on the quote.
4. 4
   The repair: Flashing, weatherstripping, pan replacement, curb rebuild - the actual work, done to current Florida building code. We pull permits when the job calls for it.
5. 5
   The test: We water-test the area before we pack up. If water still gets in, the job isn’t done.
6. 6
   The guarantee: Every repair is covered by our Done Right Promise. If it’s not right, we make it right. That’s a lasting standard - our way of saying the job is never “good enough.”

What Therma-Tru Roof Repair Costs in Westgate

Here’s what Westgate homeowners actually pay us for Therma-Tru roof-related repairs:

What moves the price? Whether the roof deck has rot (Westgate homes built in the 60s and 70s often have dry-rotted sheathing once you open the flashing), whether we’re pulling a permit, and whether you want OEM Therma-Tru parts or better-suited aftermarket seals. You’ll get a written, line-item quote before any work starts - and the price won’t change once we open the wall. That’s our rule, not a sales pitch. Call (561) 468-6136 for a free estimate - we don’t charge a trip fee inside the home county.

Why Westgate Homeowners Call Winslow Windows & Doors for Therma-Tru Work

We’ve been fixing homes across Westgate since 2011, and Ed Winslow’s name is on the company - not on some faceless franchise sign. When you call about a leaking Therma-Tru door, you talk to the same team from the first estimate to the final water test. Our techs know Therma-Tru’s product lines because they re-flash and reseal them every week. But if your home runs PGT, CGI, CWS, or ES Windows products around the roofline too, we’re authorized installers for those as well - you don’t need a second contractor. A live person answers the phone 24/7. Every tech on site is background-checked and in uniform, so you know exactly who’s at your door before the truck even parks. And every job carries the full backing of our Done Right Promise. We don’t leave a job that’s good enough - we leave it right, or we’re not done.

FAQs