Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
PGT Roof Replacement & Installation in Westgate: What to Know First
PGT roof replacement and installation in Westgate runs between $9,800 and $32,000 depending on the roof system, square footage, and whether you’re swapping shingles or moving to standing-seam metal. Most full replacements in Westgate take two to four days from tear-off to final inspection, and we quote the job with a fixed line-item price before a single shingle comes off. You’re on this page because you own a PGT product and your roof is at the end of its life, or it’s been compromised by Florida weather. We’re Winslow Windows & Doors, an independent PGT service provider in Westgate, and Ed Winslow has been doing this work since 2011. Call (561) 468-6136 for a free estimate, and a live person picks up, day or night.
How PGT Products Fail - and How We Fix Them
PGT makes excellent windows and doors. But in Westgate, the roof is the first line of defense, and when it fails, everything below it pays the price. Here’s what we see most often on homes with PGT products:
- Leaking around PGT WinGuard window frames due to failed roof flashing above. Water runs down the roof deck, finds a seam in the underlayment, and follows the framing to the window header. The window itself is usually fine. We fix the flashing, replace the damaged roof section, and re-seal the window perimeter so the WinGuard units keep doing their job.
- Corroded clip hardware on PGT 400 Series windows after roof leaks above. Westgate’s humidity plus trapped moisture equals rust on window clips, even galvanized ones. If we see this during a roof replacement, we replace the clips while the wall cavity is accessible. It’s a small fix that prevents a sagging sash later.
- Granule loss on shingles around roof penetrations that sit above PGT sliding glass doors. Poorly sealed pipe boots and vent flashing let water track down to the door header. By the time you see staining above a PGT sliding door, the roof underlayment is already compromised. We strip the section, replace the boot, and verify the door’s top seal is still true.
- Warped roof decking over enclosed patios housing PGT casement windows. Westgate’s afternoon thunderstorms saturate soffit areas where ventilation is poor. The decking sags, the shingles ripple, and casement windows below get condensation. We replace the decking, add ventilation if needed, and the windows settle back to smooth operation.
- Metal roof seam separation after wind uplift pulls fasteners. Some Westgate homes have standing-seam metal roofs over PGT-heavy elevations. Uplift from storm winds loosens fasteners at the ridge and eave lines, causing telltale oil-canning and seam gaps. We re-secure, re-seal, and sometimes replace panels that have creased beyond repair.
Our PGT Roof Replacement & Installation Process
No two Westgate roofs are identical, but the way we run a PGT job stays consistent. Here’s the path from first call to final walk-through:
- 1
Roof assessment and measurement. We inspect the existing roof, the attic ventilation, and any PGT window or door headers that sit below rooflines. Ed’s been on Westgate roofs since 2011, so we know what this neighborhood’s humidity and wind exposure does to a deck.
- 2
Fixed line-item quote. You get a written number with every material and labor cost broken down. No allowances, no vague “to be determined” line items. If the decking underneath is rotten, we’ll tell you before we start and adjust the quote before we tear anything off.
- 3
Material selection. We walk you through shingle, tile, or metal options that suit your specific roof pitch and the PGT products below. Some homes need heavier underlayment because of the window placements; others need reinforced flashing at the chimney and wall transitions.
- 4
Protected tear-off and replacement. We cover landscaping, protect PGT windows and doors with sheeting and stay-bracing, and pull permits with the local building department. Inspections are scheduled and passed before we call the job done.
- 5
Final inspection and cleanup. We walk the roof deck seam by seam, check every flashing point, test attic ventilation, and leave the property cleaner than we found it. Then Ed signs off on the Done Right Promise.
What PGT Roof Replacement & Installation Costs in Westgate
Roof replacement pricing in Westgate depends on roof size, pitch, material, and whether the decking needs replacement. Here are the ranges we quote most often:
| Roof Scenario | Typical Cost in Westgate |
|---|---|
| 1,500 sq ft shingle roof, basic architectural shingles | $9,800 - $13,500 |
| 2,000 sq ft shingle roof with some decking replacement | $14,000 - $19,000 |
| 2,500 sq ft shingle roof with full decking replacement | $19,000 - $26,000 |
| Tile roof replacement, moderate size | $24,000 - $32,000 |
| Standing-seam metal roof, standard pitch | $19,000 - $29,000 |
What moves the number? Roof pitch (steep roofs are slower, safer work), how many layers need tear-off, whether the decking is solid, and how much flashing detail exists around chimneys, skylights, and wall transitions. We never charge a trip fee in our home county, and every quote is free. Call (561) 468-6136 to schedule yours.
Why Westgate Homeowners Call Winslow Windows & Doors for PGT Work
Ed Winslow grew up just off Hialeah Drive, close enough to Westgate that he still considers the neighborhood his backyard. He learned the fundamentals of exterior protection at Miami Lakes Educational Center, where an instructor taught him that a well-fitted window or a properly flashed roof saves families more money than almost any other home upgrade. That lesson stuck.
We’re locally owned and operated since 2011, with a published address and license number. Every technician who shows up in Westgate is background-checked and in uniform. The phone rings 24/7 and a live person answers, not a voicemail loop or a call center. And we’re authorized installers for eight brands, including PGT, CGI, CWS, ES Windows, and ECO Window Systems, so if your PGT units need a full replacement rather than a roof repair, we can quote both same visit. The Done Right Promise backs every job we touch. If it’s not right, we make it right.
FAQs
No, a roof replacement done by a licensed contractor does not void your PGT warranty on windows or doors. But improper flashing or careless installers who damage frames during roof work can create problems PGT won’t cover. That’s why we protect your PGT units during tear-off and re-seal any perimeter seams after the roof is done.
Yes. We never remove windows during a standard roof replacement. We cover and brace each PGT unit, and if we find header damage from a previous leak, we’ll address it from the roof side first before recommending any window work.
Emergency tarping can usually happen within 24 hours, and a full replacement typically starts within one to two weeks depending on permit scheduling with the county. Westgate’s building department can move faster after a named storm, but we’ll walk you through the timeline honestly when we inspect the damage.
Yes. If the roof leak caused window frame or clip damage, we source OEM PGT components through our supply chain. For aftermarket-compatible flashings and sealants, we use products rated for Florida’s wind and humidity conditions, always disclosed on the quote. Staying warranty-safe matters more than cutting corners on a cheaper part.
Only if we find hidden decking rot or structural issues that weren’t visible before tear-off. That happens on roughly a third of Westgate homes due to decades of humidity. If it does, we stop work, show you the damage in person, and give you a written change order before we proceed. No surprises on the final invoice.
Call (561) 468-6136 for an exact quote on your PGT roof replacement in Westgate. Estimates are free, and Ed’s name is on the door, and on every job we do.
Written by Ed Winslow, Owner, Winslow Windows & Doors at Winslow Windows & Doors, serving Westgate and nearby areas.
Six Reasons Homeowners Choose Winslow Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.










Before
After
Before
After
Before
After