Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
PGT Roof Repair in Westgate: What to Know First
PGT roof repair in Westgate typically runs $350-$900 for most skylight flashing, roof-to-wall transition, and vent collar failures, with most jobs completed same day once we’re on site. We’re an independent PGT service provider, not a factory warranty shop, so we diagnose the actual failure rather than defaulting to a full replacement. If you own a Westgate home with PGT skylights, roof glass, or impact-rated roof assemblies, this page tells you exactly what fails, what it costs, and who to call: (561) 468-6136.
Ed Winslow has worked on PGT products across Westgate since before Winslow Windows & Doors opened its doors in 2011. The homes out here, especially the older ranchers off Haverhill Road and the two-story builds near the Westgate Recreation Center, have their own set of roof issues tied to South Florida sun, hurricane-driven rain, and decades of thermal cycling. We know what those roofs do to PGT glass and flashing because we’ve repaired it hundreds of times.
Key Takeaways
- Independent, not factory: We repair PGT products without voiding what’s left of your warranty.
- Same-visit diagnosis: A live person answers the phone 24/7, and we show up on time with parts on the truck.
- Real numbers before work starts: Your written estimate is fixed. No change orders, no surprise line items.
- Ed’s word behind every job: The Done Right Promise means if our repair fails, we come back and make it right.
How PGT Products Fail - and How We Fix Them
PGT makes a genuinely tough product. But in Westgate’s heat and hurricane seasons, even well-built roof components develop predictable failure patterns. Here are five we see on a regular basis:
- PGT SkyTrak Skylights: frame-to-curb sealant failure. The aluminum frame on older SkyTrak units expands and contracts at a different rate than the roof curb, especially on Westgate’s flat-roof homes and low-slope add-ons. After 8-12 years of South Florida sun, the factory sealant stiffens and separates. What looks like a glass crack is often just that seal letting rainwater wick into the roof deck. We pull the frame, replace the sealant with a marine-grade polyether, and reset the unit. We don’t caulk over the problem like some handyman crews will.
- PGT WinGuard roof-to-wall transition flashings on eaves and dormers. On Westgate’s gable-roofed homes, the roof-to-wall seam where PGT impact glass meets shingle or tile is the single most common leak point. The original installers often used a builder-grade flashing that corrugates and shifts under wind uplift, especially on the north-facing slopes that catch the brunt of afternoon storms. We cut out the failed metal, install a double layer of self-adhered flashing with a PGT-compatible kick-out diverter, and reseat the glass edge. That’s the difference between a repair that lasts five years and one that leaks again next August.
- PGT VentGuard roof vent covers: cracked polycarbonate after hail or debris impacts. The VentGuard line uses an impact-rated polycarbonate lens, but a direct hit from Westgate’s oak and palm debris during any named storm can leave a hairline crack that isn’t visible from the ground. Moisture gets in, fogs the lens, and eventually drips through the roof assembly. We inspect with a moisture meter, replace the lens with PGT OEM or a verified aftermarket equivalent (depending on availability and your coverage), and reset the vent collar.
- PGT Impact Glass Roof Panels in pool cages and sunrooms: gasket rot at the T-channels. Westgate has a lot of sunrooms and pool enclosures with PGT impact glass roof panels. The rubber gaskets inside the aluminum T-channels break down under constant UV and chlorine exposure, critical in homes within a half mile of any pool-heavy block. Once those gaskets lose flexibility, water wicks along the channel and drips inside the room, rarely in a straight line directly below the leak. We remove the panels, replace every gasket with an EPDM compound rated for South Florida, and test the assembly before we call the job done.
- PGT SkyView roof glazing: seal failures at the sash-to-frame junction. On Westgate’s mid-century moderns and newer glass-heavy builds, PGT SkyView roof glazing sits directly over living space. The internal seal that keeps the double-pane unit gas-filled and watertight can fail after 10-15 years of attic heat cooking the glass from below. You’ll see condensation between the panes, or a milky haze along the edges. This one usually needs a new sealed unit, but we can often source it without replacing the entire frame, which saves you a minimum of $1,400 on most Westgate roofs.
What ties these together: most PGT roof failures aren’t the glass. They’re the interfaces, the gaskets, the flashings, the sealants. A crew that doesn’t know PGT’s tolerances will “silicon the heck out of it” (we’ve seen that phrase on a competing estimate) and call it a repair. We fix the actual point of failure, and we test it before we leave.
Our PGT Roof Repair Process
Here’s what a PGT roof repair with Winslow Windows & Doors actually looks like, from the first call to the final handshake:
- 1
You call (561) 468-6136. A live person answers, day or night. We ask where in Westgate you are, what PGT product is showing the problem, and whether water is actively coming in. If it’s an active leak, we tell you exactly what to do right now to minimize damage, even before we arrive.
- 2
We inspect on-site with a moisture meter and a 42-point roof-deck check. Our technician arrives in uniform, background-checked, and ready with equipment to trace water intrusion that isn’t visible from the surface. We look at the roof-to-wall junctions, the curb, the interior ceiling, and the attic cavity if accessible.
- 3
We hand you a written diagnosis and a fixed price. You get a line-item estimate before any work begins. We walk you through it: what failed, why it failed, what we’re replacing, and whether we’re using OEM PGT parts or a quality aftermarket equivalent. If it’s aftermarket, we say so and explain the trade-off.
- 4
We do the repair right the first time. That means removing failed sealant (not covering it), resetting flashings with proper slope and drainage, and using compounds rated for South Florida’s thermal range. For any roof-deck penetration, we pull a permit where West Palm Beach code requires it and pass inspection before closing up.
- 5
We test the repair before we leave. A water test on the repaired seam, a thermal check on the glass, and a visual walk of the interior. If it doesn’t pass our own standard, we don’t call it done.
- 6
You get the Done Right Promise in writing. If anything we touched fails, we come back. No invoice. No debate. Ed’s name is on the truck, and he answers for the work.
What PGT Roof Repair Costs in Westgate
Straight talk on pricing, because that’s what you actually need to know:
| Repair Type | Typical Range in Westgate | What Moves the Price |
|---|---|---|
| Skylight frame reseal (labor + materials) | $350-$600 | Curb condition, roof slope, access difficulty |
| Roof-to-wall transition flashing replacement | $450-$900 | Linear feet of flashing, rotted decking below |
| Vent collar reseat and reseal (PGT VentGuard) | $250-$450 | Pipe type (PVC vs metal), attic access |
| Pool cage/sunroom gasket replacement (per panel) | $95-$180 | Panel count, frame corrosion |
| Roof glazing sealed unit replacement (SkyView) | $1,200-$2,800 | Unit size, glass type, frame salvageability |
Those are honest Westgate numbers from our actual job history. If rotted roof decking is discovered beneath a failed flashing, we show you a photo and a fixed add-on price before touching it, never a surprise on the back end. The most cost-effective repair is the one caught before a leak opens your ceiling. Call (561) 468-6136 and we’ll give you a free estimate with no trip charge inside our home county. And if you already have a written estimate from another company, let Ed take a look. A free second opinion has saved Westgate homeowners thousands.
Why Westgate Homeowners Call Winslow Windows & Doors for PGT Work
There are plenty of roofers in Palm Beach County. There is exactly one business that’s been owner-operated by Ed Winslow since 2011, with a published Westgate-area address, a license number you can look up, and a Done Right Promise that’s not a marketing slogan. It’s Ed’s word in writing.
When a Westgate homeowner calls us about PGT roof repair, they get a technician who knows PGT’s products well enough to quote a gasket dimension from memory. If the PGT unit is beyond reasonable repair, we’re also authorized installers for CGI, CWS, ES Windows, and ECO Window Systems, so we can give you honest replacement options without stretching the truth to earn a bigger job. If the repair is the right call, that’s what we recommend.
And when you call at 2 a.m. on a Sunday because a storm just opened a seam in your roof, a live human picks up the line. No voicemail loop. No call center in another time zone. A neighbor you can call at 2 a.m., and someone will actually answer. The one down the road.
FAQs
An independent repair does not automatically void a PGT warranty, provided the repair targets the flashing, sealant, gasket, or adjacent roof assembly and does not alter the structural glass unit itself. As an independent PGT service provider, we don’t modify the glass or frame in ways that would invalidate your coverage. If you’re within the PGT warranty window, call (561) 468-6136 and we’ll help you determine whether a factory claim is the smarter first step, at no charge.
Most PGT frames, gaskets, and flashings are still in production and available within 5-7 business days. Some older PGT series, especially SkyTrak units from before 2014, have discontinued frame components. In those cases we source a verified aftermarket match that meets or exceeds the original spec and tell you upfront exactly what we’re using. We never install a part without your written approval.
Roughly 70% of the PGT roof issues we see in Westgate are repairable without replacing the glass or the primary frame. If the leak is at a flashing, a gasket, a sealant seam, or a vent collar, repair usually makes sense. If the insulated glass unit itself has failed or the frame is corroded, replacement is the honest call. We’ll give you the straight answer either way, with numbers, and let you decide.
We prioritize active leaks and typically get a technician to a Westgate home the same day you call. No trip charge inside our home county, and our technicians show up with the tools and sealants needed to stop water intrusion on the first visit. Call (561) 468-6136 and ask for Ed if you want to talk through what you’re seeing before we roll the truck.
Written by Ed Winslow, Owner, Winslow Windows & Doors at Winslow Windows & Doors, serving Westgate and nearby areas.
Six Reasons Homeowners Choose Winslow Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.










Before
After
Before
After
Before
After