Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Before
After
Before
After
Before
AfterMr-Glass Windows & Doors in West Palm Beach, FL | Winslow Windows & Doors
Winslow Windows & Doors provides independent Mr-Glass service across West Palm Beach, from El Cid to Grandview Heights and every CBS block in between. We’re not manufacturer-affiliated, and we don’t pretend to be. What we are is the local crew that has pulled, repaired, and reinstalled more Mr-Glass windows in this city’s salt air and masonry openings than any out-of-town outfit, which means we know exactly what these units do well here and where they fail. Call (561) 468-6136 for a straight answer and a free estimate.
Why West Palm Beach Residents Choose Us for Mr-Glass Service
We’ve been working on Mr-Glass products in West Palm Beach long enough to know the difference between a window that needs a $40 roller replacement and one that needs a full-frame tear-out. Our shop is the independent route: full Mr-Glass sales & service knowledge without the corporate pricing structure. Ed Winslow grew up just off Hialeah Drive, close enough to Westgate that he still thinks of the neighborhood as his backyard, and he learned early at Miami Lakes Educational Center that a well-fitted window saves a family more money in a year than nearly any other upgrade. That lesson stuck. We apply it to every Mr-Glass repair and replacement we touch in West Palm Beach.
Common Mr-Glass Windows & Doors Problems We Solve in West Palm Beach
- Pitting and white oxidation on anodized aluminum frames. Mr-Glass single hung units take a beating within ten years of exposure to Lake Worth Lagoon salt air. We see it most often along the bottom rail, where salt spray settles and eats through the anodizing. The fix depends on how deep the corrosion has gone.
- Roller assemblies on horizontal sliders that bind and grind. Fine beach sand works into the bottom track of Mr-Glass 5000 Series sliders, especially on homes west of Olive Avenue where the trade winds carry grit. Worn rollers turn a two-finger glide into a wrestling match. We stock replacements on the truck and can often rebuild the assembly same-day.
- Vinyl frame bowing on west-facing exposures. In West Palm Beach’s afternoon heat load, vinyl Mr-Glass slider frames can flex enough to pull the interlock apart. That gap lets conditioned air leak out and humidity creep in. Shimming helps in some cases; in others, the sash is done.
- Perimeter seal failures in historic masonry openings. In the 1920s-to-1940s homes of El Cid and Flamingo Park, original window frames were often set directly in mortar with no wood buck. When an out-of-area crew skips buck fabrication and sets a Mr-Glass unit anyway, the perimeter seal fails, the impact rating is compromised, and water finds its way inside within the first big storm.
- Hardware corrosion on casement operators. Mr-Glass 6000 Series casements near the water develop stiff operators and seized hinges faster than inland units. Salt air is relentless. We replace with genuine Mr-Glass hardware when available, and machine aftermarket parts when the originals are long discontinued.
Mr-Glass Service in West Palm Beach: What Local Conditions Mean for Your Equipment
Here’s the thing about West Palm Beach that changes how Mr-Glass windows and doors get serviced here, and it’s not something a crew from Boynton Beach or Delray Beach would know to look for. The city’s Historic Preservation Board designates El Cid, Flamingo Park, and Grandview Heights as protected neighborhoods, which means any replacement window or door needs two separate approvals: HPB sign-off on profile, muntin pattern, and material to match the original steel or wood casements, plus Florida Building Code impact glazing compliance. A Mr-Glass impact window in a 1920s Mediterranean Revival home on El Vedado Road has to look like it belongs there while still holding up to a 150 mph design wind speed. That dual-track permitting process doesn’t exist ten miles south. We keep pre-submitted HPB cut sheets for Mr-Glass aluminum impact casements on file, which saves our West Palm Beach customers weeks of back-and-forth. Our crew pulled a failing Mr-Glass 6000 Series casement from a 1938 coral-rock home in El Cid a while back. The aluminum frame had corroded through on the lower hinge side, and the original steel sub-frame sat in mortar with no wood buck at all. We fabricated a pressure-treated buck, anchored it with stainless fasteners, got the HPB field inspector to sign off, and set a new impact-rated Mr-Glass casement with a dark bronze finish that matched the block’s original sash. The homeowner passed final inspection three weeks before the June 1 storm season cutoff. That’s the kind of job we do in West Palm Beach that a generic install crew simply can’t.
Mr-Glass Models & Products We Service in West Palm Beach
We service the full residential Mr-Glass lineup for West Palm Beach homeowners: the 3000 Series Single Hung, 5000 Series Horizontal Slider, 6000 Series Casement, and 7000 Series Awning. We use genuine Mr-Glass hardware and weatherstripping when it’s still available. When a part has been discontinued for eight years and the manufacturer no longer supplies it, we won’t pad a repair invoice by hunting a junkyard. We have a local machine shop reproduce worn rollers and keep quality aftermarket balances on the truck for fast West Palm Beach turnaround. If your frame is salt-corroded past the point of saving, or the sash interlock is warped beyond shimming, we’ll tell you straight: a full-frame Mr-Glass replacement costs less over five years than repeated patch-and-caulk repairs. We also handle West Palm Beach Impact Windows, hurricane impact windows, and full-frame replacements.
Mr-Glass Service Pricing in West Palm Beach
What you’ll pay for Mr-Glass service in West Palm Beach depends on the repair type and the condition of the existing frame. Here’s what we typically see:
- Roller or balance replacement on a Mr-Glass slider or single hung: $95-$240
- Weatherstripping or interlock realignment on a Mr-Glass sash: $110-$290
- Casement operator or hinge hardware replacement on a Mr-Glass 6000 Series: $130-$310
- Full-frame Mr-Glass impact replacement (including new pressure-treated buck in masonry openings): $900-$2,600 per opening, depending on size, finish, and HPB requirements
Historic districts add time and money, because the buck fabrication and dual permitting are non-negotiable. We write line-item quotes so you see exactly what you’re paying for. The estimate is free. Call (561) 468-6136 and we’ll walk the job with you.
Serving West Palm Beach, FL - Our Local Coverage Area
We’re based in the West Palm Beach area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Mr-Glass Windows & Doors in West Palm Beach
Most post-war CBS homes in West Palm Beach were framed with windows set directly into the block opening. No wood buck means no even anchoring surface, and in many cases the original buck has rotted out entirely from decades of humidity and storm soak. A new Mr-Glass impact unit needs a solid, level perimeter to seat and seal against, and code inspectors in West Palm Beach will fail a direct-to-block set every time. We fabricate pressure-treated bucks, anchor them into the masonry, and get the inspection done before the window is set. For Window Installation in West Palm Beach, call (561) 468-6136 for an exact quote on your openings; estimates are free.
In nearly every case, no. El Cid’s HPB standards require replacement windows in contributing structures to match the profile, muntin pattern, and material character of the original steel or wood casements. Vinyl doesn’t pass that bar. Mr-Glass aluminum impact casements, done in a finish that reads like the original steel, have a much better record. We keep pre-submitted HPB cut sheets for Mr-Glass aluminum casements in the office, which speeds up review. Call (561) 468-6136 and we’ll tell you what’s likely to pass before you buy anything.
Lake Worth Lagoon salt air is the culprit. West Palm Beach sits directly on the lagoon, with only Palm Beach island between the city and the open Atlantic, so airborne salt settles on aluminum frames constantly. The anodized coating on Mr-Glass single hungs holds up well for the first several years, but by year eight to ten, the bottom rail starts showing white oxidation and pitting. It’s a West Palm Beach pattern we see on nearly every coastal block. The repair path depends on whether the corrosion is cosmetic or structural. Call (561) 468-6136 for a free assessment.
If the track and frame are still solid, roller replacement is absolutely on the table. We pull the sash, inspect the bottom track for sand damage, and rebuild the roller assembly with genuine Mr-Glass parts when they’re available, or machine aftermarket replacements when the originals are out of production. Rusted frames or cracked vinyl are a different story. But a slider that’s just dragging from beach sand can usually be fixed for a couple hundred dollars, not a couple thousand. Call (561) 468-6136 and describe the drag; we’ll give you a straight answer.
Because West Palm Beach’s Historic Preservation Board runs a parallel review that Boynton Beach doesn’t have. In most of West Palm Beach, a Mr-Glass hurricane door needs Florida Building Code impact approval and, if the home sits in El Cid, Flamingo Park, or Grandview Heights, a separate HPB sign-off on design, profile, and finish. The two reviews aren’t coordinated, so the timeline stretches. We know exactly what to submit and in what order, which is why our West Palm Beach customers typically get through review faster than a contractor who’s never dealt with HPB before. Call (561) 468-6136 and we’ll scope your door against both sets of requirements.
Service Areas Near West Palm Beach
We run Mr-Glass service throughout the county, from West Palm Beach service area proper up to Westgate, down to Mr-Glass service in South Palm Beach, and across to Boynton Beach, Wellington, and Royal Palm Beach. Our Mr-Glass service in Westgate work keeps us on the same streets Ed grew up around, and we still treat that neighborhood like home.
Book Your Mr-Glass Service in West Palm Beach Today
We’ll answer the phone, listen to what your window or door is doing, and tell you whether it’s a repair or a replacement. No pressure. Call (561) 468-6136 to schedule your free estimate. The one down the road.
Written by Ed Winslow, Owner at Winslow Windows & Doors, serving West Palm Beach since 2011.
Six Reasons Homeowners Choose Winslow Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.