Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Before
After
Before
After
Before
AfterCGI Shingle, Tile & Metal Roofing in Westgate: What to Know First
CGI shingle, tile, and metal roofing in Westgate is roof work we handle as an independent CGI service provider. Most CGI roof repairs in this part of Palm Beach County run between $350 and $1,400 depending on what failed, and we can usually get a technician to your home within one to two business days. We’re not an authorized CGI dealer, but we’ve installed and repaired enough of their systems across Westgate to know exactly how they age, where they leak, and what it takes to fix them right. If you own a CGI roof and something’s not right, call (561) 468-6136 and a live person will answer.
How CGI Products Fail - and How We Fix Them
- CGI Sentinel Shingle: lifted corners after summer storms. The Sentinel line is a heavy architectural shingle that holds up well until a storm catches the adhesive strip. In Westgate, where afternoon thunderstorms roll through from May through October, we regularly see shingle tabs that lifted because the original seal never fully cured after installation. The fix is a hand-sealed repair using the same adhesive we’d use on high-wind sections, not a roofing cement smear that fails in six months.
- CGI Estate Tile: cracked barrel tiles from careless foot traffic. Tile roofs don’t fail because the tile is weak; they fail because someone walked on a tile the wrong way during a gutters, vents, or solar panel job. Estate Tile is a concrete barrel profile that cracks when weight hits the raised crown instead of the flat channel. We’ll match the tile profile and color from local distribution, replace the broken piece, and re-point the underlayment if the crack was open long enough to let water through.
- CGI Standing Seam Metal: loose clips after thermal expansion cycles. Metal roofs in Florida expand and contract dramatically, and we see standing seam panels that have worked their clips loose after a few years. The symptom is a rhythmic popping sound when the sun hits the roof in the morning, or a seam that looks slightly raised. Our fix is tightening and, where needed, replacing the clip, then resetting the seam so it’s weather-tight without trapping the panel’s natural movement.
- CGI Tile-to-shingle transitions: underlayment rot at the tie-in point. Westgate homes with mixed roofing (tile on the main section, shingle on an addition or covered porch) share one weak point: the transition flashing. When we open these up, the underlayment is usually saturated because the original metal wasn’t stepped properly. We replace the flashing with a stepped design that moves water away from the seam, then re-install matching tile and shingle courses so the transition disappears.
- CGI metal drip edge: rust and corrosion along the eave line. The drip edge isn’t a CGI product itself, but it’s the most common thing we replace on CGI metal roofs in Westgate. Salt air and morning condensation eat the exposed metal edge, especially if fasteners were over-torqued at installation. We cut out the rusted edge, replace it with a coated aluminum drip that won’t react with the CGI panels, and re-secure the first panel run.
Our CGI Shingle, Tile & Metal Roofing Process
- 1
Call and a live answer. You’ll reach a person, not a voicemail tree. We’ll ask what you’re seeing and schedule a visit that fits your day.
- 2
On-site diagnosis. The technician walks the roof, identifies the failure, and documents it with photos you can keep. No mystery diagnoses.
- 3
Parts decision. For CGI-specific components, we source OEM parts where the repair warranty depends on them. For non-warranty items like drip edge, underlayment patches, or sealant, we use quality aftermarket materials that equal or beat OEM performance without markup matching the manufacturer’s list price.
- 4
The repair, done methodically. We remove only what’s failed, replace it, and re-secure the surrounding courses so the repair blends into the existing roof.
- 5
Water test and inspection. We run water across the repair to confirm it’s tight, then walk the rest of the roof looking for the next potential failure so you’re not calling us back in three months for something we could’ve caught.
- 6
Cleanup and the guarantee. We leave the roof and yard cleaner than we found it. Every job is backed by the Done Right Promise. If it’s not right, we make it right.
What CGI Shingle, Tile & Metal Roofing Costs in Westgate
Most Westgate CGI repairs fall into predictable ranges. Here’s what we typically see:
- Shingle tab re-sealing (small area): $150-$300
- Individual tile replacement (including underlayment patch): $250-$500
- Standing seam clip repair or panel re-securing: $300-$700
- Transition flashing replacement: $600-$1,200
- Drip edge replacement (partial eave run): $400-$900
What moves the price is access, material, and the condition of the surrounding roof. A two-story rake on a steep pitch costs more to work safely than a single-story eave. An OEM CGI tile costs more than a locally matched equivalent. If the underlayment is compromised well beyond the visible damage, we’ll show you before we touch anything beyond the original scope. No change orders, no surprises on the invoice. Call (561) 468-6136 for an exact quote, estimates are free.
Why Westgate Homeowners Call Winslow Windows & Doors for CGI Work
Ed Winslow grew up just off Hialeah Drive, close enough that Westgate still feels like his own backyard. When neighbors call about a CGI roof problem, they’re not getting a ticket number from a national chain call center; they’re getting a local company whose owner’s name is on the truck. Every technician carries the company’s reputation onto the roof, and that matters when you’re deciding whether the repair will hold through the next hurricane season. We’re also a multi-brand exterior specialist; our installers work on PGT, CWS, ES Windows, and ECO Window Systems as well, which means when a roof issue involves flashing, ridge venting, or water migration near windows or doors, we diagnose the whole envelope rather than treating the roof in isolation. And if the repair’s over $200, take $40 off. If you’ve got another estimate, bring it in; we’ll give you a second opinion free. Veterans and seniors always save 10 percent. These aren’t limited-time promotions. They’re standing offers, and they don’t expire.
FAQs
We can’t speak for CGI’s warranty, and we won’t pretend to. What we can tell you is that we use OEM or superior aftermarket components, follow current Florida Building Code, and document every job. If your roof is still under a CGI warranty and you’re concerned about preserving it, we’ll walk you through what the warranty language covers before any work begins. Call (561) 468-6136 and we’ll help you make the right call, not the convenient one.
Most of them, yes. We match Sentinel shingle colorways, Estate and other CGI tile profiles, and standing seam panel dimensions through local distribution. When CGI has discontinued a specific profile or color, we’ll say so plainly and show you the closest available alternative before we start. Call (561) 468-6136 and we’ll tell you what’s matchable and what isn’t.
Repair makes sense when the failure is isolated and the surrounding roof is sound. Replacement makes sense when underlayment is saturated, the panel or tile field is failing in multiple locations, or the cost to repair exceeds 20 percent of replacement territory. We’ll give you our honest recommendation based on what we see, not on what makes us the bigger job. Call (561) 468-6136 for a free estimate and straight answer.
We schedule repairs within one to two business days in most cases. If you’ve got active water coming in, tell us when you call; we’ll move you up. A live person answers 24/7, so you’ll know where you stand before you hang up. Call (561) 468-6136.
Only if we find something dangerous that wasn’t visible at the diagnosis, and we’ll show you that thing and get your approval before we proceed. Our fixed pricing and written line-item quotes are exactly that: fixed. No change orders stuffed into the final invoice. That’s part of the Done Right Promise.
Written by Ed Winslow, Owner, Winslow Windows & Doors at Winslow Windows & Doors, serving Westgate and nearby areas.
Six Reasons Homeowners Choose Winslow Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.