Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Before
After
Before
After
Before
AfterHorizontal Roller Windows in Westgate, FL
Horizontal roller windows slide open along a track rather than swinging in or out, making them one of the most practical choices for Westgate homes where screen porches, tight landscaping, or AC equipment sit right outside the frame. A quality window installation by a licensed professional typically runs $400 to $900 per window installed in the Westgate market, and most single-window jobs are completed in a half-day. At Winslow Windows & Doors, Ed Winslow has overseen these installations personally since 2011 – and every one carries our Done Right Promise.
If you’re weighing your options or just want a straight answer on pricing, call us at (561) 468-6136 – a live person answers every call, any time of day. You can also browse our full Window Installation in Westgate page to see how horizontal rollers fit alongside our other window services for this area.
Westgate sits in western Palm Beach County, close enough to the coast that wind-driven rain and humidity are year-round realities, not just seasonal concerns. Homes here – whether 1970s CBS construction near Haverhill Road or newer builds closer to the Florida Turnpike corridor – deal with frames that swell in summer, tracks that collect sand and debris, and older single-pane glass that turns the back bedroom into a greenhouse by noon. Single & Double Hung Windows were another common choice, but horizontal rollers are particularly common on these properties because they were the default window style for Florida builders through the 1980s and 1990s. That means a lot of them in Westgate are well past their useful life.
When You Need Horizontal Roller Windows
- Frames stick, drag, or won’t close flush. In Westgate’s humidity, aluminum tracks corrode and vinyl frames warp over time. When a window that used to glide now takes two hands and a shoulder, the track and frame are usually past the point of repair – replacement is the cleaner fix.
- You’re seeing condensation between the panes. Dual-pane units have a sealed air gap; once that seal fails, moisture gets in and the glass fogs permanently. We see this regularly in older Westgate homes where the original windows were installed before current Florida energy codes took effect.
- Your utility bills keep climbing. Single-pane horizontal rollers are among the least efficient window types still in service. Upgrading to a Low-E, impact-rated unit from a brand like PGT or CGI can make a measurable difference in a home that runs the AC eight or nine months a year.
- You’re adding or replacing a window in a tight space. Casements and double-hungs need clearance to swing or slide vertically. Horizontal rollers work where there’s shrubbage, a fence line, or a patio cover right outside – common situations in Westgate’s smaller lots west of Military Trail.
- Storm season is coming and your current windows aren’t impact-rated. Palm Beach County requires impact-rated glazing or storm shutters for any new or replacement window installation. If your horizontals are original to the house, they almost certainly don’t meet the current Florida Building Code, and that gap matters when a named storm is two days out.
- You’re preparing to sell and the inspection flagged your windows. A failed window inspection in Palm Beach County can stall a closing fast. We’ve helped homeowners in the Westgate area get compliant replacements scheduled and completed before the buyer’s walk-through.
Our Horizontal Roller Windows Process
- Free in-home estimate with upfront pricing. Ed or one of our background-checked, uniformed technicians comes to your Westgate home, measures every opening precisely, checks the existing rough opening condition, and gives you a written quote before we leave. No range that doubles when the invoice arrives – the number on the paper is the number on the bill. No trip charge inside Palm Beach County.
- Product selection and order. We’ll walk you through the options that actually make sense for your home – frame color, glass package (single, dual-pane, Low-E, impact-rated), and brand. For Westgate homes that need impact compliance, we lean on PGT and CGI units, both of which meet Florida Product Approval requirements. ViewLux is a strong option when budget is the primary concern without giving up on energy performance. We place the order and confirm the lead time with you so there are no surprises while you wait.
- Permit coordination (when required). Palm Beach County requires a permit for window replacements that change the opening size or require structural modification. If your job needs one, we handle the application – you don’t have to navigate the county building department yourself. Straight like-for-like replacements in existing openings sometimes qualify for a permit exemption; we’ll tell you exactly which category your job falls into.
- Professional removal and frame inspection. On installation day, our crew removes the old window carefully to avoid damaging surrounding stucco or drywall, then inspects the rough opening for rot, water intrusion, or corrosion before the new unit goes in. In Westgate, we regularly find moisture damage in the sill area of original 1980s frames – catching that before installing a new window is the difference between a job that lasts and one that fails in three years.
- Installation, sealing, and track alignment. The new window is set, shimmed level and plumb, fastened to the rough opening, and sealed with a continuous bead of impact-rated silicone on both interior and exterior. The track is tested for smooth operation before we clean up. We don’t rush the sealing step – that’s where water infiltration problems start, and Westgate’s afternoon storm season exposes every shortcut.
- Final walk-through and Done Right Promise. Before we pack the truck, we demonstrate full operation of every window we installed, answer any questions, and document the job. If anything isn’t right – now or later – Ed’s name is on the door, and on every job we do. Call us and we come back. That promise doesn’t expire.
Horizontal Roller Windows Pricing in Westgate
Horizontal roller windows in Westgate run across a fairly wide range depending on glass type, impact rating, frame material, and opening size. Below are honest market ranges for fully installed units – labor, materials, and disposal of the old window included.
| Window Type | Installed Price Range (per window) |
|---|---|
| Standard single-pane aluminum roller (non-impact) | $400 – $550 |
| Dual-pane Low-E vinyl or aluminum roller | $550 – $750 |
| Impact-rated horizontal roller (PGT, CGI) | $700 – $900 |
| Oversized or custom-width horizontal roller | $900 – $1,400+ |
A few factors push costs toward the higher end in Westgate specifically:
- Opening condition. Homes near the older sections of Westgate off Haverhill Road sometimes have hairline stucco cracks or compromised sill pans from decades of rain cycling. If we find rot or water damage in the rough opening, that’s repaired before the new window goes in – and it adds to the total.
- Impact glass vs. standard glass. Palm Beach County’s current building code requires impact-rated products (or approved storm shutters) for new window installations. If you’re replacing a window that was grandfathered under an older permit, going to impact glass is both a code requirement and a genuine upgrade – but it does cost more upfront.
- Multi-window jobs. Installing four or more windows in one visit reduces per-unit labor cost. If you have several rollers in poor condition, scheduling them together is almost always the better financial move.
- Permit fees. Palm Beach County permit fees vary by scope. We’ll confirm the exact fee when we assess your job – never estimate it away and surprise you later.
Seniors and veterans always receive a 10% discount on any job. Any repair over $200 qualifies for $40 off. And if you have a written estimate from another contractor, we’ll give you a free second opinion so you know exactly what you’re comparing. Call (561) 468-6136 for a free estimate – the pricing conversation costs nothing.
Why Westgate Homeowners Choose Winslow
There are national window chains that will take your call and send a salesperson. What they won’t give you is Ed Winslow showing up personally, knowing your neighborhood, and putting his name on the permit. Winslow Windows & Doors has been doing this work in Palm Beach County since 2011 – over 15 years of local installations, local permits, and local accountability. We know which Westgate subdivisions have original aluminum single-pane rollers that are long overdue for replacement. We know how Palm Beach County’s building department processes window permits and what inspectors look for. That’s not something a national chain can replicate by opening a regional office.
When you call (561) 468-6136 at any hour, a real person answers. Not a voicemail. Not a callback queue. Someone who can schedule your estimate, answer a basic question about your window type, or transfer you to Ed directly if the situation calls for it. That’s a commitment, not a marketing line.
Our technicians arrive in uniform, and every one of them has passed a background check. You know who’s coming before the truck pulls up. Upfront pricing means the number we quote is the number you pay – no line items that appear after the fact.
We’re an authorized installer for PGT, CGI, and ViewLux, among others – brands that carry Florida Product Approval for impact performance, not just marketing language about strength. The home of every Westgate family we work with gets a window that was specified correctly, installed correctly, and covered by a warranty that the manufacturer will actually honor because a licensed, authorized installer put it in.
And behind all of it is the Done Right Promise. If the installation isn’t right, we come back and make it right. Full stop. No expiration date, no “you should have called sooner.” Ed’s word is the warranty.
Key Takeaways
- Horizontal roller windows in Westgate typically cost $400 to $900 installed, with impact-rated units at the higher end of that range.
- Palm Beach County building code requires impact-rated glazing or approved storm shutters for new and replacement window installations – we handle permit coordination when required.
- Westgate’s older housing stock (much of it built in the 1970s-1990s) frequently has original single-pane rollers that no longer meet code or energy standards.
- Winslow Windows & Doors is locally owned by Ed Winslow, in business since 2011, with a published address and license number – full transparency.
- Seniors and veterans receive a permanent 10% discount. Repairs over $200 get $40 off. Free second opinions on any written estimate.
- Every call is answered live, 24/7, at (561) 468-6136.
- The Done Right Promise means if something’s off, we fix it – no argument, no clock running out.
FAQs – Horizontal Roller Windows
How much does it cost to replace a horizontal roller window in Westgate?
A standard Picture & Fixed Windows or horizontal roller window replacement in Westgate runs $400 to $900 fully installed, depending on glass type and impact rating. Impact-rated units from brands like PGT or CGI sit at the higher end but are typically required under current Palm Beach County building code for replacement work. Multi-window projects reduce per-unit labor cost, so if you have several to replace, scheduling them together saves money. Call (561) 468-6136 for a free estimate – we’ll give you an exact number after measuring your openings, not a range that shifts at invoice time.
Do I need a permit to replace a horizontal roller window in Palm Beach County?
It depends on the scope of work. Like-for-like replacements in the existing rough opening sometimes qualify for a permit exemption under Florida Building Code; any change to opening size or framing requires a full permit. Winslow Windows & Doors handles permit applications for jobs that need them – you don’t have to navigate Palm Beach County’s building department yourself. We’ll tell you exactly which category your job falls into before we start.
Can horizontal roller windows be impact-rated?
Yes – impact-rated horizontal rollers are a standard product from manufacturers like PGT and CGI, and they’re what Westgate homeowners need to meet current Florida Building Code requirements. Impact-rated horizontal rollers use laminated glass that holds together under wind-driven debris impact, meeting Miami-Dade or Florida Product Approval standards. They cost more than standard dual-pane units, but they eliminate the need for separate storm shutters and can lower your homeowner’s insurance premium. Note: Window Installation Near Me in Westgate, FL for impact-rated windows should always be done by a licensed professional – incorrect installation voids both the product warranty and the impact certification, and a window that looks right but isn’t properly anchored won’t perform when it matters.
How long does a horizontal roller window installation take in Westgate?
A single horizontal roller window typically takes two to three hours from start to cleanup, including removal of the old unit, rough opening inspection, installation, sealing, and final testing. A full-house replacement of six to eight windows is usually a full day’s work. Lead time between estimate and installation varies based on product availability – standard in-stock units often ship within one to two weeks, while custom sizes or specialty glass packages can take three to four weeks. We confirm the timeline with you before you commit to anything. Call (561) 468-6136 and we’ll give you a straight answer on current lead times.
Written by Ed Winslow, Owner at Winslow Windows & Doors, serving Westgate.
Six Reasons Homeowners Choose Winslow Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.