Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Before
After
Before
After
Before
AfterTherma-Tru Roof Replacement & Installation in Westgate: What to Know First
Therma-Tru roof replacement and installation in Westgate runs between $8,500 and $22,000 for most homes, depending on roof size, pitch, and whether you’re replacing a single slope or the entire system. As an independent Therma-Tru service provider, we handle full tear-offs, decking repair, underlayment, and Therma-Tru roofing system installation, with most Westgate jobs completed in two to five days. We give upfront line-item pricing before any work starts, so the number you approve is the number you pay. This page is for Westgate homeowners who already trust Therma-Tru at their entryway and want that same standard of fit and finish overhead. Call (561) 468-6136 and Ed or a member of our team will pick up.
How Therma-Tru Products Fail - and How We Fix Them
Therma-Tru built its name on entry doors, but the roofing and exterior systems carry the same fiberglass-reinforced engineering. Here’s what we actually see on Westgate homes and what we do about it:
- Therma-Tru Classic-Craft roof integration flashing failure. The Classic-Craft line uses a thick fiberglass skin that expands and contracts differently than the asphalt shingle or metal flashing around it. In Westgate’s wet season, that differential movement pulls flashing loose at the roofline juncture. We see it on houses where the original installer used standard aluminum instead of a wider stepped flashing. Our fix: remove the failed flashing, install 4-inch minimum headwall flashing with proper overlap, and reseal with a polyurethane sealant rated for South Florida UV, not a cheap caulk.
- Fiberglass threshold and kickboard water wicking at the roof deck. On homes with a Therma-Tru door opening onto a flat or low-slope roof section, water that pools near the threshold wicks up through microscopic gel-coat cracks and into the underlayment. The door still looks fine. The roof deck underneath is rotting. We uncover this during tear-offs in older Westgate patio enclosures. Fix: full replacement of the affected decking, then installation of a self-adhered membrane barrier at the transition before the new roofing goes down.
- Therma-Tru Pulse series impact-rating gap at ridge vents. We’ve replaced several Pulse-series systems in Westgate where the original ridge vent wasn’t matched to the impact-rated assembly. The vent collar cracks under high-wind uplift, and water follows the crack line straight into the attic. Owners notice it as a ceiling stain that appears after a hard summer storm. Our fix requires pulling the ridge cap, installing a High-Ridge or equivalent vent rated for the wind zone, and re-securing the cap with the proper fastener pattern.
- Sill pan and weather-stripping compression wear on second-story roof access doors. Any Therma-Tru door that opens onto a roof terrace or upper deck goes through hundreds more heat cycles than a ground-floor door in Westgate. The compression weather-strip flattens, the sill pan fills with wind-driven rain, and water eventually finds the fastener holes in the deck. We check every roof-access Therma-Tru opening during a replacement, replace the sill pan if it shows pitting, and install new compression strips rated for sustained 90-degree heat.
- Aftermarket parts that void the Therma-Tru warranty. Some Westgate handyman repairs use generic flashing kits or off-brand sealants, and Therma-Tru’s documentation is strict about what’s acceptable on warranty-covered systems. We quote OEM components when the system is still under warranty and use documented, warranty-safe aftermarket equivalents only when the owner approves the trade-off in writing. You’ll know before you pay.
Our Therma-Tru Roof Replacement & Installation Process
- 1
Call and talk to a person. You reach us at (561) 468-6136 any time. We ask about your roof’s age, the Therma-Tru products you have, and what you’re seeing. No ticket numbers, no call-back queue.
- 2
On-site inspection and attic check. We walk the roof, inspect the Therma-Tru transitions and any door-to-roof junctures, and check the attic for moisture, decking rot, and ventilation problems. You get a written report with photos.
- 3
Parts decision before we quote. OEM Therma-Tru components where warranty coverage matters, quality aftermarket where it doesn’t. The line-item quote shows exactly which is which and what each costs.
- 4
Tear-off and deck repair. Full removal of old roofing, deck inspection, and replacement of any rotted or delaminated decking before anything new goes down. No covering up problems.
- 5
Installation and transition work. New underlayment, Therma-Tru roofing system, and proper flashing and sealing at every door, skylight, and ridge. Every penetration gets stepped flashing, not just caulk.
- 6
Cleanup and walkthrough. We magnet-sweep the yard, haul everything off, and walk the roof with you before we leave. If something’s not right, Ed’s name is on the truck. He’ll make it right.
What Therma-Tru Roof Replacement & Installation Costs in Westgate
Here’s what we quote most often in Westgate, based on actual jobs over the last several years:
- Single slope or section replacement: $3,200 - $8,500
- Standard 1,800-2,400 sq ft home, full tear-off: $8,500 - $14,000
- Larger 2,400-3,500 sq ft home with steep pitch or tile transition work: $14,000 - $22,000
- Decking repair (per sheet, if rot found): $90 - $140
- Therma-Tru transition flashing and re-seal at a door or ridge: $180 - $450 per opening
What moves the price? Roof pitch, number of penetrations, deck condition, and whether you need OEM Therma-Tru components for warranty coverage. We give free estimates and the quote won’t change once we start. Call (561) 468-6136 for an exact number on your Westgate home.
Why Westgate Homeowners Call Winslow Windows & Doors for Therma-Tru Work
We’ve been doing this since 2011, and Ed Winslow grew up just off Hialeah Drive, close enough to Westgate that this is still his backyard. The Done Right Promise means if it’s not right, we come back and make it right, no argument, no fine print. Every technician who shows up at your Westgate door is background-checked and in uniform, and the person answering the phone at 2 a.m. knows roofing. We’re also an authorized installer for PGT, CGI, CWS, and ES Windows, which matters when your roof replacement touches windows, doors, or impact-rated openings. We quote once, we show up, and we leave the job cleaner than we found it. Upfront pricing, no surprises on the invoice.
FAQs
In most cases no, not if the transition work around the door is done to the manufacturer’s installation standards. Where homeowners run into trouble is when a roofer uses non-OEM flashing or the wrong sealant at the door-to-roof junction, or when they fail to document the work. We install warranty-safe components and keep records of what went where, so if a Therma-Tru claim comes up, you have the paperwork. If you’re in Westgate and want us to check your current setup before a claim, we’ll do a free second opinion on any written estimate. Call (561) 468-6136.
A standard single-story tear-off and replacement in Westgate takes two to four days. Homes with multiple slopes, steep pitch, or extensive decking repair can run four to six days. Rain delays are real in South Florida, and we’d rather wait out a storm than rush an underlayment job that fails in six months. We’ll give you a timeline on the written quote before you commit.
Yes. Therma-Tru’s exterior trim and transitional components come in factory-matched finishes, and for roofing we match the surrounding system’s color and profile whether you’re on asphalt shingle, tile, or metal. If you have an older Therma-Tru color that’s been discontinued, we’ll show you the closest factory match and note it on the quote.
If the damage is isolated to a transition point and the rest of the roof is under fifteen years old, a section repair often makes sense and runs $3,200 to $8,500 in Westgate. If the roof is past twenty years or you’re seeing multiple leaks, a full replacement is usually the cheaper path over the next five years. We’ll show you the deck condition during inspection and let the evidence make the case. Call (561) 468-6136 and we’ll come look.
Yes. We pull all required permits for roof replacement in Westgate and schedule inspections, and we’re insured and bonded, with a published address and license number you can verify. If a homeowner tells you a roofer offered to skip the permit to save money, walk away. Permits protect you and your property value.
Written by Ed Winslow, Owner, Winslow Windows & Doors at Winslow Windows & Doors, serving Westgate and nearby areas.
Six Reasons Homeowners Choose Winslow Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.