Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Mr-Glass Window Installation: The Westgate Owner’s Guide
If you’ve got a Mr-Glass window that’s failed or is failing somewhere in the frame, sash, or installation, we can match it, source the right components, and install it correctly. In Westgate, a Mr-Glass window installation replacement typically lands between $75 and $450 per window depending on what’s failed, whether we’re working with the glass unit, the balance system, the weatherstripping, or the frame itself. Most calls start with a homeowner who notices condensation between the panes, a sash that won’t stay up, or a window that suddenly lets in Westgate’s afternoon heat and humidity. We stock common Mr-Glass window components on the truck and can usually get specialty pieces ordered within a few business days.
Which Mr-Glass Models This Applies To
Mr-Glass builds several series, and we’ve worked on most of them here in Westgate. The common lines we see are the Mr-Glass horizontal rolling windows, single-hung and double-hung styles, and their fixed picture windows, many of which were installed in the 1990s and 2000s throughout Palm Beach County. Here’s the part where most people get tripped up: Mr-Glass labels their windows with a small etched marking near the corner of the glass or a sticker on the frame channel, usually showing a series code and the window’s dimensions in inches. If that label is gone, we match by measuring the visible glass width and height, then confirm the frame depth. This matters because Mr-Glass windows from different manufacturing years don’t always share the same balance shoe or weatherstripping profile, even when the glass dimensions are identical. Swapping in a near-match aftermarket part without verifying the frame depth is how homeowners end up with a window that opens fine for a week and then binds up.
On the OEM versus aftermarket question, we’re straight with you. For things like balance springs, pivot bars, and tilt latches, a quality aftermarket replacement often performs as well as the original Mr-Glass part and costs less. For glass itself, we recommend sticking with something that matches the original thickness and coating spec, especially if your Mr-Glass window was built with low-E or impact-rated glass. We can walk you through both, and we’ll tell you which makes sense for your specific window before any work begins.
Signs Your Mr-Glass Window Installation Is Failing
- Condensation or fog between the panes. The IG (insulated glass) seal has failed. Westgate’s heat and rain cycle works on failed seals fast, and once moisture gets in, the glass fogs permanently and the window loses most of its thermal value.
- Hard to open, hard to close, or won’t stay up. Usually the balance system. Mr-Glass single- and double-hung windows use a spring or block-and-tackle balance inside the side channels. Those wear out with use, and a window that slams shut is a balance pack that’s done.
- Water stains or soft spots on the drywall below the window. This points to a failed installation seal around the frame or deteriorated outer weatherstripping, not the glass itself. We’ve seen this in Westgate homes where the original installers flashed the window incorrectly by Palm Beach County code standards.
- Drafts you feel on a calm day. The weatherstripping and pile seals are shot. In older Mr-Glass units, the wool pile in the sash channels compresses over time, letting air move freely even when the window’s locked.
- Cracks forming where the frame meets the wall or at the corners. Thermal expansion and settling cause this. If you see a crack running from the window corner at a diagonal, you may have a frame or header issue that needs more than a glass swap.
Replacement Cost & What’s Included
In Westgate, what you pay depends on what actually failed. Here’s the honest breakdown:
- Balance system replacement (per window): $85 to $210, parts and labor.
- Weatherstripping and pile seal replacement (per window): $65 to $150.
- Tilt latch, pivot bar, or sash lock replacement: $45 to $110.
- Insulated glass unit replacement (per window): $190 to $450, depending on size and glass spec.
- Full frame or rough-opening repair with re-installation (per window): $250 to $600.
Every quote we give in Westgate is a written line-item estimate before work starts. You’ll see the part cost and the labor broken out separately. The price we quote is the price you pay. No change orders. No “we found more once we opened it up” games. If we do encounter hidden damage, we stop, show you, and give you a new number before we touch it. And every Mr-Glass window installation we do is covered by the Done Right Promise. Ed’s name is on the door, and on every job we do. If it’s not done right, we come back and make it right.
DIY or Call Us?
Let’s be clear about where the danger lives here. Window glass, especially larger picture windows or impact-rated units, is heavy and under stress in the frame. A bad lift, a wrong angle, a frame that shifts while you’re working on a ladder, and you’re looking at serious cuts or worse. Balance springs on hung windows are under tension. If you don’t know how to release that tension safely, don’t try it. What you can do yourself is the diagnosis: check for condensation between panes, look for cracked seals, feel for drafts. That helps us give you a faster phone quote. But for the replacement itself, call (561) 468-6136. A trained technician with the right tools and the right part will have it handled in one visit.
FAQs
In Westgate’s climate, weatherstripping and balances typically last 10 to 15 years, and the insulated glass seal usually holds for 15 to 20 years. Salt air and intense sun exposure shorten that timeline for anything facing south or west. Call (561) 468-6136 and we can inspect your specific windows.
Sometimes, yes. A minor pile seal or weatherstripping fix is a repair, not a replacement. But if the glass seal has failed or the balance is worn past adjustment, a patch job just costs you more in a year when it fails again. We’ll tell you which bucket your window falls into, honestly.
For a standard part like a balance or latch, we’re usually done in under an hour per window. A full insulated glass unit replacement may take an hour and a half to two hours, including cleanup.
We stock the most common Mr-Glass balances, latches, tilt pins, and weatherstripping profiles on our trucks for Westgate service calls. Specialty parts and custom glass sizes are ordered and typically arrive within a few business days. We’ll let you know on the phone what to expect.
We also work on windows from PGT, CGI, and CWS, so if you’ve got a mixed house, we’re set up for that too.
Call Winslow Windows & Doors for Your Mr-Glass Window Installation in Westgate
You don’t need a ticket number or a call center. You need a live person who knows Westgate windows and can tell you straight whether your Mr-Glass window is a quick fix or a full glass replacement. Call (561) 468-6136 for a free estimate. Upfront pricing, a written line-item quote, and the Done Right Promise on every job. We’re the one down the road. Ed Winslow put his name on the truck, and he stands behind what that means.
Written by Ed Winslow, Owner, Winslow Windows & Doors, serving Westgate and nearby areas.
Six Reasons Homeowners Choose Winslow Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.










Before
After
Before
After
Before
After