Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Before
After
Before
After
Before
AfterCGI Roof Replacement & Installation in Westgate: What to Know First
CGI roof replacement and installation in Westgate runs $14,500 to $38,000 for most homes, with full tear-off and new underlayment included on the majority of jobs we quote. We’re an independent CGI service provider, not a factory arm, so we give honest guidance on whether your CGI roof actually needs full replacement or a targeted repair will hold. Most Westgate replacements are finished in two to four working days once materials land.
This page is for homeowners in Westgate who already have CGI roofing, or who are pricing CGI for a new install, and want straight answers from a local company that has been on Westgate roofs for over 15 years. Call (561) 468-6136 and you’ll get a live person, not a ticket system.
How CGI Products Fail - and How We Fix Them
- CGI Sentinel standing seam panels lifting at the ridge. We see this on Westgate homes built between 2005 and 2012. The original installers often used standard-length clips instead of the high-wind clips CGI specifies for coastal-adjacent zones. Florida’s afternoon thunderstorms work the panels loose over time. Our fix is a full ridge re-secure with the correct CGI-rated clip spacing, which stops the lift permanently rather than patching it.
- CGI Estate Series shingle-profile panels showing granular loss on south-facing slopes. Westgate roofs take brutal UV on the south and southwest exposures. The granule embedment on early Estate Series runs wears faster than newer production. We’ve replaced individual panels where the steel substrate is still sound, saving owners from a full roof buy when the damage is cosmetic on one slope.
- CGI Board & Batten installed with the wrong fastener pattern. This is a recurring problem we fix on Westgate homes where a previous contractor used generic screws instead of CGI’s specified fasteners with the correct washer stack. Water gets behind the panel face at the batten lines. We pull affected panels, inspect the decking, and re-install with OEM-spec fasteners so the warranty stays intact.
- CGI Corrugated panels rusting at field-cut edges. Any cut edge that wasn’t touched up at install will eventually show rust in South Florida humidity. We see this most often around chimneys and skylights on older Westgate homes. The fix is edge re-treatment with the correct touch-up coating, or panel replacement if the rust has crept under the paint.
- CGI underlayment failures on low-slope sections. The panel is only as good as what’s under it. On Westgate homes with flat or low-pitch roof sections, we regularly open up roofs where the original synthetic underlayment has broken down while the CGI panels above are still fine. Our replacement process starts with underlayment inspection before we ever quote a panel count.
Our CGI Roof Replacement & Installation Process
- 1
We walk the roof and the attic. Ed Winslow or one of our senior techs gets on the roof and looks at panel condition, fastener integrity, underlayment, and flashing. We also check the attic side for decking issues.
- 2
We give you a written line-item quote. No verbal ballpark. You see exactly what we’re replacing, what materials we’re using, and what it costs.
- 3
We make the parts decision together. OEM CGI panels when the warranty matters and production availability supports it. On discontinued series, we’ll walk through quality aftermarket options that match profile and finish.
- 4
We strip, inspect, and replace. Full tear-off down to decking, decking repair where needed, new underlayment, then the CGI panels or specified replacement material installed to spec.
- 5
We test and document. Water test on seams and penetrations, photo documentation of the whole roof before we leave.
- 6
We walk the job with you. You see every section before we pull the truck away. If it’s not right, it gets fixed before we call it done.
What CGI Roof Replacement & Installation Costs in Westgate
Here’s what we’re quoting on Westgate homes right now:
- Full tear-off and CGI standing seam replacement, average Westgate ranch: $18,000 to $32,000
- Partial CGI panel replacement (single slope, storm or impact damage): $3,500 to $7,000
- Underlayment replacement under sound CGI panels: $4,000 to $9,000 depending on deck condition
- New CGI install on new construction or addition: $22,000 to $38,000
What moves the price is decking condition, roof pitch, panel profile (Estate Series runs higher than Corrugated), and whether we’re matching an existing CGI color that’s still in production. Call (561) 468-6136 for an exact quote. Estimates are free, and we’ll give you a second opinion on any written estimate you already have.
Why Westgate Homeowners Call Winslow Windows & Doors for CGI Work
Ed Winslow grew up just off Hialeah Drive, close enough to Westgate that he still considers the neighborhood his backyard. When we show up for a CGI roof job, we know the homes, the HOA expectations, and the way a Westgate afternoon storm tests a roof’s weakest point. Ed’s name is on the door, and on every roof we install.
We’ve been doing this since 2011. Every technician is background-checked and in uniform before the truck pulls up. We answer the phone 24/7 with a live person. And we back every roof with the Done Right Promise: if it’s not right, we make it right. No fine print. We also install PGT, CWS, ES Windows, and ECO Window Systems, so if your CGI situation calls for a different brand’s profile or a discontinued panel needs a match, we have options most single-line contractors don’t.
FAQs
We are an independent CGI service provider, not a factory-authorized dealer, which means we give you straight answers about parts, pricing, and whether a repair or replacement actually serves you. We install CGI by spec and follow their published installation requirements so manufacturer warranties remain valid when panels are involved.
Yes, when the color is still in active CGI production, we match it directly. When a color has been discontinued, we’ll source the closest available match and show you a physical sample on your roof before we order anything. Call (561) 468-6136 and we’ll tell you over the phone whether your series and color are still available.
No. We write line-item quotes and we hold to them. The only thing that changes a price is if we open the roof and find decking damage that wasn’t visible from above or below, and we’ll show you photos and get your sign-off before spending another dollar.
Most full CGI replacements in Westgate are done in two to four working days. Partial repairs are usually same-day or next-day once parts are in hand. Weather can push a schedule, but we don’t leave a roof open overnight.
Yes. We handle permits and inspections for every roof replacement we do in Westgate. Permits get pulled before demo starts, and the job isn’t closed out until the inspection passes. It’s non-negotiable on our end.
Get Your CGI Roof Priced by Someone Who Knows Westgate
If you own a CGI roof in Westgate and you’re not sure whether it needs replacement or a repair, the fastest way to an honest answer is a phone call. You’ll get a live person, a straight conversation, and a free estimate from a company that’s been on Westgate roofs since 2011. Call (561) 468-6136 to schedule your free estimate, or to get a second opinion on a written quote you already have. My name’s on the truck. If it’s not right, I’ll make it right.
Written by Ed Winslow, Owner, Winslow Windows & Doors at Winslow Windows & Doors, serving Westgate and nearby areas.
Six Reasons Homeowners Choose Winslow Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.