Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Before
After
Before
After
Before
AfterPGT Custom & Geometric Windows in Westgate: What to Know First
We provide independent repair, installation, and replacement of PGT custom and geometric windows throughout Westgate, with most jobs completed in one to three days once parts are in hand. Pricing runs honest and upfront: you’ll get a written line-item estimate before any work starts, and our standing offers apply on every PGT job we do. If you own a PGT arched window, radius unit, or oversized geometric opening in Westgate, this page tells you what actually goes wrong with them, what it costs to fix, and why we do it differently. Call (561) 468-6136 for a free estimate, or keep reading if you want the details first.
How PGT Products Fail - and How We Fix Them
PGT builds a solid window. But Westgate’s humidity, afternoon storms, and salt air put real stress on custom shapes, especially anything with a curved frame or a non-standard sash. Here are the failure modes we see most often on PGT custom and geometric windows in this neighborhood.
- Radius glass seal failure on WinGuard vinyl units. PGT’s WinGuard impact line is everywhere in Westgate, and the arched or radius versions develop fogging between the panes faster than rectangular units. The cause is almost always moisture intrusion at the curved seal edge, where the spacer bar bends and the desiccant gets overwhelmed. We fix it by replacing the insulated glass unit (IGU) through an OEM-matching fabricator, not by drilling holes and injecting chemicals, which never holds up in Florida humidity.
- Frame sag on oversized geometric openings. When a Westgate homeowner puts a large half-round or eyebrow window over a front door, the head load on that span is significant. On PGT aluminum frames (SST series), we occasionally see the lintel or the frame itself deflect slightly, which throws the operable sash out of square. The window wasn’t installed wrong; the opening was never properly headed off. Our fix includes reinforcing the header before resetting the frame.
- Roller and track wear on PGT sliding geometric units. PGT’s aluminum sliding windows with non-rectangular sashes, like angle-top sliders, wear their rollers unevenly because the weight distribution isn’t balanced. Homeowners hear grinding, then the sash gets stiff, then it won’t lock. We replace the roller assemblies and realign the track, and we use stainless hardware rather than the zinc-coated originals so salt air doesn’t eat them in two years.
- Weep hole blockage on custom-shape picture windows. Every PGT picture window has weep holes at the sill, but on geometric shapes like trapezoids and pentagons, the sill angles can trap pine needles, lovebugs, and Westgate’s famous dust. Water backs up, works into the frame, and you get staining at the interior drywall corners. We clear the full drainage path and rebuild the sill seal if the weather stripping has compressed.
- Caulk joint separation on architectural shapes. Custom and geometric windows put more linear feet of exterior caulk under stress than standard rectangles. On Westgate homes with stucco, the caulk joint between a PGT radius frame and the stucco reveal cracks from thermal movement. It’s not a window failure; it’s a sealant failure. We cut out the old sealant, backer-rod it, and use a polyurethane sealant rated for Florida UV that stays flexible for years.
Our PGT Custom & Geometric Windows Process
- 1
You call, a person answers. Not a recording. Not a call center. You reach us at (561) 468-6136 and tell us what’s going on with your PGT windows.
- 2
We come out and diagnose. A background-checked technician drives to your Westgate home, inspects the window, takes measurements, and photographs the frame, glass, and hardware. No trip charge inside our home county.
- 3
You get a written estimate with real numbers. We tell you the exact scope, the parts we’ll use (OEM PGT where it matters, quality aftermarket where it doesn’t), and what it costs. The price on the estimate is the price on the invoice.
- 4
We source parts the right way. Geometric IGUs get ordered to spec, including the exact glass thickness, Low-E coating, and tint that matches your existing PGT window. No generic substitutions that leave one window looking different from its neighbors.
- 5
We install, test, and clean. The new glass or hardware goes in, we cycle every operable unit multiple times, run water on the exterior seal, and leave the job cleaner than we found it.
- 6
The Done Right Promise applies. If it’s not done right, we come back and make it right. That’s Ed’s word, and Ed’s name is on the truck.
What PGT Custom & Geometric Windows Costs in Westgate
Here’s honest pricing for the PGT custom and geometric window work we do most in Westgate. These are installed ranges, not parts-only numbers.
- IGU replacement for a PGT arched or radius window: $450-$900, depending on glass size and Low-E/impact specification
- Full sash rebuild on a PGT angle-top slider: $280-$520 including stainless rollers and track realignment
- Weep hole clearing and sill seal restoration: $95-$180 per window
- Exterior caulk joint replacement around a geometric unit: $4-$8 per linear foot
- Full replacement of a PGT custom geometric window: $900-$2,400 depending on size, shape complexity, and impact rating
What moves the price is glass type, shape complexity, and whether the frame itself is damaged. A simple half-round picture window costs less than a trapezoid with an operable awning sash. Call (561) 468-6136 for an exact written quote, free second opinions always available on any estimate you’ve already received from another company.
Why Westgate Homeowners Call Winslow Windows & Doors for PGT Work
Winslow Windows & Doors has been fixing and installing windows in this part of Florida since 2011. Ed Winslow grew up just off Hialeah Drive, close enough to Westgate that he still considers the neighborhood his backyard. We’re an independent PGT service provider, which means we tell you the truth about what your window needs even when that truth would make a manufacturer’s rep squirm. If a PGT unit is worth saving, we save it. If it isn’t, we replace it and we’re authorized installers for CGI, CWS, ES Windows, and ECO Window Systems, so your options are never limited to one brand. Every technician who rolls up to your Westgate home is background-checked, uniformed, and answers to Ed directly. The Done Right Promise covers every job. My name’s on the truck. If it’s not right, I’ll make it right.
FAQs
Replacing an IGU through a quality fabricator generally does not void the PGT frame warranty, but PGT’s warranty terms vary by product line and year of manufacture. We can review your original warranty documentation and tell you exactly where you stand before touching the window. Call (561) 468-6136 and we’ll walk you through it.
Yes. We order IGUs with the same Low-E coating, tint, and glass thickness as your existing PGT units, including the SST and WinGuard series. Florida sun fades everything eventually, so we’ll measure your current glass under natural light before ordering. Call (561) 468-6136 for a free estimate and we’ll confirm the match in person.
Most PGT custom and geometric window repairs take one to three days from the day parts arrive. Custom-shape IGUs are fabricated to order, so lead time is typically one to three weeks depending on the complexity of the shape and the glass spec. We keep you updated, and we never start a job until all parts are physically in our hands.
If the frame is corroded through, bowed, or cracked, replacement is usually cheaper in the long run. A new geometric window from PGT or one of our other authorized brands gets you a fresh seal, fresh warranty, and new glass that meets current Florida building code. If the frame is sound but the glass or hardware failed, repair almost always makes more sense. We’ll give you both prices and let you decide, with no pressure either way. Call (561) 468-6136 for numbers on your specific window.
Yes. When your project requires a building permit in Westgate, we pull it, schedule the inspection, and make sure the job passes. Impact windows in Florida have strict code requirements, and we don’t cut corners on compliance. It’s part of the Done Right Promise.
Written by Ed Winslow, Owner, Winslow Windows & Doors at Winslow Windows & Doors, serving Westgate and nearby areas.
Six Reasons Homeowners Choose Winslow Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.