Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Before
After
Before
After
Before
AfterHow Much Does Custom Window & Door Order Cost in Westgate?
Custom window and door orders in Westgate, FL typically run between $850 and $6,200 per unit, depending on size, glass type, frame material, and impact rating. Most Westgate homeowners ordering a single impact-rated custom window land somewhere between $1,100 and $2,800 installed, while a full custom entry door with sidelights from a brand like Therma-Tru or PGT usually falls in the $2,400 to $5,500 range. These figures include labor, permitting, and disposal of the old unit – upfront pricing is something we build into every quote.
Custom Window & Door Order Cost Breakdown (2026)
The table below reflects what Winslow Windows & Doors actually quotes for custom orders in the Westgate market as of 2026. These aren’t national averages pulled from a database – they come from real jobs we’ve completed in this zip code and the surrounding Palm Beach County neighborhoods.
| Product / Service | Typical Installed Price Range | Notes |
|---|---|---|
| Custom impact single-hung window (standard size) | $850 - $1,600 | PGT or CGI, up to 36″ x 60″ |
| Custom impact double-hung window (larger opening) | $1,100 - $2,400 | Sizes 36″ x 72″ and up |
| Custom geometric / specialty-shaped window | $1,400 - $3,800 | Arched, radius, trapezoid; frame-out labor adds cost |
| Custom impact casement window | $1,200 - $2,800 | ES Windows and ECO Window Systems options available |
| Custom impact sliding glass door (2-panel) | $2,200 - $4,200 | PGT WinGuard; 6 ft and 8 ft openings |
| Custom impact sliding glass door (3-panel) | $3,400 - $5,800 | Larger wall openings, structural header work often needed |
| Custom Therma-Tru entry door (single, no glass) | $1,800 - $3,200 | Fiberglass, factory-finished, custom width/height |
| Custom Therma-Tru entry door with sidelights | $2,800 - $5,500 | Full impact-rated assembly; permit included |
| Custom impact garage door | $2,600 - $6,200 | Single-car to double-car, custom panel configurations |
| Permit fee (Palm Beach County) | $75 - $350 per opening | Pulled by Winslow; included in most full-job quotes |
| Old unit removal and disposal | $50 - $150 per opening | Usually bundled into installation price |
| Structural header modification | $400 - $1,200 | Required when widening openings; common in older Westgate homes |
What Pushes the Price Up
The biggest cost drivers in Westgate aren’t always obvious at first glance. Homes built in the 1960s and 1970s – which make up a large portion of the housing stock between Haverhill Road and Military Trail – often have non-standard rough openings that require custom frame sizing. That alone can add $150 to $400 per window compared to a home built after 2000 with uniform framing. If a customer in one of those older blocks needs a window that’s 41 inches wide rather than the standard 36 or 48, every part of that order is manufactured to spec, and the factory lead time alone is typically 4 to 8 weeks for true custom units.
Glass selection is the other variable that surprises people. Standard impact laminated glass is priced into most of our base quotes. But if you want low-E coatings for energy performance (which makes a real difference in Westgate’s west-facing exposure to afternoon sun), or a specific tint to match existing windows on a partial replacement project, those upgrades add $80 to $220 per unit depending on the glass package. CWS offer some particularly good low-E options that hold up well in Florida’s UV environment.
What Keeps the Price Down
Bundling multiple openings in one order almost always saves money. When we’re manufacturing custom units anyway, adding two or three more windows to the same factory run costs far less per unit than returning for a second job. Our seniors and veterans discount – a permanent 10% reduction on every job – applies to custom orders just as it does to standard replacements. And if you’ve received a written estimate from another contractor, we’ll give you a free second opinion at no charge and no obligation.
What Affects Custom Window & Door Order Pricing in Westgate
- Impact rating requirements: Palm Beach County requires impact-rated products for new and replacement openings in most residential structures. In Westgate specifically, homes within the High-Velocity Hurricane Zone (HVHZ) designation need products that carry Miami-Dade Notice of Acceptance (NOA) approval. PGT and CGI products meet this standard, but verifying the specific NOA number before ordering is a step we handle on every job – skipping it can result in a failed inspection that costs more to fix than the window itself.
- Opening size and shape: Custom geometric windows – circles, arches, octagons, and trapezoids – cost 40% to 80% more than same-area rectangular units because each piece is manufactured individually and the frame-out labor is more involved. Several homes along the Westgate-Broward County boundary line have older arched transom windows that look simple but require fully custom orders.
- Frame material: Vinyl frames are the most common choice in Westgate and the most affordable. Aluminum frames cost somewhat more but hold up better in high-humidity coastal proximity conditions. For Westgate residents within a few miles of the Intracoastal, aluminum with a Kynar finish is often worth the extra cost to avoid frame corrosion.
- Lead time and manufacturing complexity: Standard custom windows take 4 to 8 weeks from confirmed order to delivery. Unusually large units or complex multi-panel configurations can extend that to 10 to 12 weeks. Rush manufacturing is available through some of our brand partners but typically adds 10% to 20% to the unit price.
- Structural modifications: Widening or raising an existing opening requires a structural engineer’s sign-off in Palm Beach County, plus a separate permit in some cases. We see this most often when Westgate homeowners want to replace a standard sliding door with a wider three-panel system, or when converting a window opening to a full-height door. Budget $400 to $1,200 for this work if it’s needed.
- Finish and hardware: Factory-painted frames in standard colors (white, bronze, tan) are typically included in base pricing. Custom color matches or specialty hardware – particularly for Therma-Tru entry doors with decorative glass inserts and premium locksets – can add $200 to $600 to a door order.
A Note on Westgate’s Climate and Building Stock
Westgate sits in an unusual position for window and door planning. It’s far enough inland that residents sometimes assume they don’t need full HVHZ-rated products, but Palm Beach County code says otherwise – and frankly, given the wind speeds we saw during recent storm seasons, the code is right. The afternoon sun on west- and southwest-facing elevations is also particularly aggressive here, which is why we consistently recommend low-E glass on those exposures. A CGI or PGT impact window with a low-E coating on a west-facing wall in Westgate can meaningfully reduce afternoon heat gain and take real pressure off your air conditioning.
We’ve completed custom window and door orders in Westgate on everything from compact 1960s CBS homes to newer construction near the Westgate/Belvedere Homes neighborhood, and the variation in rough opening sizes and structural conditions is wide. That’s exactly why a proper site measurement before finalizing any custom order is non-negotiable for us.
How to Save on Custom Window & Door Order in Westgate
Bundle Multiple Openings in One Order
The single most effective way to reduce per-unit cost on a custom order is to combine openings. Factory setup costs and freight are essentially fixed per order – spreading them across six windows instead of two drops the effective cost per unit. If you’re planning to replace windows in phases, consider pricing the full scope now even if you schedule installation in two stages. You’ll often find the math favors doing everything at once.
Get the Measurement Right Before the Order Ships
A remeasure-and-reorder is expensive and time-consuming. Custom windows and doors cannot be returned to the manufacturer once built to spec. We send a technician to confirm exact rough opening dimensions before we place any factory order – this is a standard part of our process, not an add-on. If you’ve gotten a quote from a contractor who planned to measure at delivery rather than before the order, that’s a risk worth asking about.
Understand What’s Included in the Quote
Ask every contractor to itemize permits, disposal, and structural work separately. Some quotes look lower until you add those back in. Our quotes for Westgate jobs include Palm Beach County permit fees, old unit disposal, and standard installation labor. What’s not included unless it comes up during the site visit: structural header work, patching stucco around the new frame, or repainting interior trim. We tell you that up front.
Take Advantage of Standing Discounts
Seniors and veterans receive a permanent 10% discount on all Winslow work – that’s not a seasonal promotion, it’s just our policy. We also take $40 off any repair over $200, which applies when an existing custom unit needs service rather than full replacement. And if you have a written estimate from another licensed contractor, we’ll give you a free second opinion on the scope and pricing.
Ask About Financing and Payment Timing
Custom orders require a deposit at the time of order – that’s true with every window and door company because the factory builds to your specs. The balance is due at installation, never before. If payment structure matters to your budget planning, that’s a straightforward conversation to have when you call for your estimate.
To get an accurate number for your specific openings in Westgate, call us at (561) 468-6136. A live person picks up every call, and we can usually schedule a free site measurement within a few days.
FAQs – Custom Window & Door Order Cost in Westgate
How much does a custom impact window cost in Westgate, FL?
A custom impact window in Westgate typically costs between $850 and $2,800 installed, depending on size, frame type, and glass package. A standard single-hung in a common residential size (say, 36″ x 48″) from PGT or CGI usually lands between $950 and $1,400. Larger openings, casement configurations, or specialty geometric shapes push toward the upper end of that range. For an exact number on your specific openings, call (561) 468-6136 – estimates are free and we come to you.
How long does a custom window or door order take in Westgate?
Most custom window and door orders take 4 to 8 weeks from confirmed order to delivery in the Westgate area. Complex units – oversized panels, arched shapes, multi-panel sliding door systems – can run 10 to 12 weeks. We give you an honest lead time when we place the order, not an optimistic estimate that gets revised later. Rush manufacturing is available through some of our brand partners but adds cost, and we’ll tell you exactly how much before you decide.
Do I need a permit for a custom window or door replacement in Westgate?
Yes – Palm Beach County requires a permit for virtually all window and door replacements, including custom orders. Permit fees in the Westgate area typically run $75 to $350 per opening, depending on the scope. Winslow pulls the permit on your behalf as part of the job; you don’t have to navigate the county building department yourself. Unpermitted work creates problems at resale and can void your homeowner’s insurance coverage, so this is one step we never skip or suggest skipping.
Is it cheaper to repair an existing custom window or replace it?
If the frame is intact and the failure is isolated – a broken seal causing fogging, a damaged operator, or hardware failure – repair is almost always cheaper, often $150 to $400 versus $1,000 or more for a full replacement. If the frame itself is corroded, cracked, or no longer meets current HVHZ impact standards, replacement is the more cost-effective long-term choice because you’re not pouring money into a unit that will continue to fail. We assess this honestly during the site visit – if a repair is the right answer, that’s what we’ll tell you. Call (561) 468-6136 and we’ll come take a look.
Do you serve the Westgate area, and is there a trip charge?
We serve Westgate and the surrounding Palm Beach County communities with no trip charge for homes within our home county. Westgate is an area we work in regularly – it’s not a distant outpost for us. Ed Winslow and the team know this area’s housing stock, the county’s permit office, and the specific building conditions common in this part of West Palm Beach. Call (561) 468-6136 and someone will answer – not a voicemail, not a callback form, an actual person who can schedule your free estimate.
What brands do you install for custom window and door orders in Westgate?
Winslow Windows & Doors is an authorized installer for eight brands: PGT, CGI, CWS, ES Windows, ECO Window Systems, Mr-Glass, Therma-Tru. For Westgate custom orders, PGT and CGI are the most common choices for impact windows given their HVHZ approval and lead-time reliability. Therma-Tru is our primary recommendation for custom entry doors. We’ll match the brand to your specific opening, budget, and performance needs – not whichever product has the best margin for us that month.
Key Takeaways
- Custom impact windows in Westgate run $850 to $2,800 installed; custom doors run $1,800 to $5,500 depending on configuration.
- Palm Beach County requires permits on all replacements; Winslow pulls them for you as part of the job.
- Lead times are 4 to 8 weeks for most custom orders – plan ahead, especially before hurricane season.
- Older Westgate homes (pre-1980s) often have non-standard rough openings that affect pricing; get a site measurement before finalizing any order.
- Bundling multiple openings in a single order reduces per-unit cost significantly.
- Seniors and veterans get a permanent 10% discount. Second opinions on written estimates are always free.
- The Done Right Promise means if something isn’t right after installation, we come back and fix it – no argument, no invoice.
Ready for an Accurate Quote?
Winslow Windows & Doors has been completing custom window and door orders in Westgate and the surrounding Palm Beach County area since 2011. Ed Winslow’s name is on the business, and on every job we take on. We’re not a national chain routing your call to a regional dispatch center – when you call (561) 468-6136, a real person answers, and Ed’s team gets to your home for a free, no-pressure site measurement. We’ll measure every rough opening, confirm the right product spec for your structure and budget, and give you an upfront price with no surprises on the invoice.
If you want to know more about what the ordering process looks like before you call, our home page covers the full scope of what Winslow does across all exterior protection services.
Upfront pricing. No trip charge in Palm Beach County. A live person on the phone right now. Call (561) 468-6136 and let’s get your custom order started.
Written by Ed Winslow, Owner at Winslow Windows & Doors, serving Westgate, FL since 2011.
Pricing reflects the Westgate market as of 2026. Winslow Windows & Doors offers free estimates – call (561) 468-6136.
Six Reasons Homeowners Choose Winslow Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.
Other Winslow Windows & Doors Services
What Neighbors Say About Winslow Windows & Doors
What Our Customers Say
"The old aluminium sliders howled every afternoon storm and swelter came straight through the glass. The new impact sliders shut with a sound like a bank vault and the back rooms finally hold their temperature."
- Percival Whitcombe"He replaced the front door and the garage door in the same week, both rated for impact, and lined the frames up so straight my level had nothing to say. My wife stopped hearing the highway from the front room."
- Maximilian Vasquez"A tile roof repair and new windows from the same company meant one crew, one permit runner, and nobody blaming the other trade. Ed checked the roof work himself before the tarp came off."
- Henrietta Pemberton