Shingle, Tile & Metal Roofing in Palm Beach Shores - Free Roof Inspection, Written Price

Fast, Reliable Shingle, Tile & Metal Roofing Across Palm Beach Shores

Shingle, tile, and metal roofing in Palm Beach Shores has to be engineered for a specific set of conditions you won’t find one mile inland. Every property here sits on the southern tip of Singer Island, wedged between the Atlantic Ocean and Lake Worth Inlet, which puts your roof in the highest wind-exposure category under the Florida Building Code. That means products must carry HVHZ compliance and Miami-Dade NOA approval, not just standard Florida Product Approval. Winslow Windows & Doors installs roofing systems built for exactly this environment, and we’ve been doing it since 2011. Call (561) 468-6136 to schedule your free in-home estimate, and we’ll walk your roof line with you before quoting anything.

Call (561) 468-6136

Why Winslow Windows & Doors Is Palm Beach Shores’s Preferred Shingle, Tile & Metal Roofing Company

Ed Winslow put his name on this business in 2011, and he still answers for every roof we fasten down in Palm Beach Shores. We’re not a national chain with a rotating cast of subcontractors. We’re an owner-operated outfit with a published address, a state license, and a live person picking up the phone 24/7. When a homeowner on Inlet Road calls at 8 p.m. with a lifted roof edge after a squall, they get a real answer, not a voicemail loop.

Palm Beach Shores customers keep our crews busy because we understand what this specific town throws at a roof. The dual-front wind and salt exposure off the inlet and the Atlantic is the most punishing microclimate in Palm Beach County. Our technicians arrive in uniform, background-checked, and they know what a corroded aluminum drip edge on a 1960s concrete block home looks like before they even climb the ladder. That local knowledge is why residents keep our number saved.

Every job carries the Done Right Promise. If a roof we install in Palm Beach Shores isn’t done right, we come back and make it right. No fine print, no ticket number. Ed’s name is on the door, and on every job we do.

Our Shingle, Tile & Metal Roofing Services in Palm Beach Shores

Our Shingle, Tile & Metal Roofing team handles the full scope of roof work Palm Beach Shores homes need, from full replacements down to the specific details that keep an inlet-front roof watertight. Here’s what we do most often in this town:

Shingle Roof Replacement and Repair

Architectural asphalt shingles remain the most common roof type on Palm Beach Shores homes, particularly the mid-century concrete block ranches that dominate the residential streets off Ocean Avenue. We install shingle systems with high-wind nail patterns, reinforced underlayment, and sealed roof-to-wall connections engineered for the wind uplift pressures this barrier island sees. Repair work includes replacing blown tabs, resealing ridge caps, and fixing the roofline damage that comes from wind-driven rain off the inlet.

Metal Roofing Installation

Metal is gaining ground fast in Palm Beach Shores, and for good reason. Standing seam and metal panel systems shrug off the salt spray that eats aluminum edges and fasteners within two decades. We install high-wind metal roof fastener patterns specific to homes on inlet-side streets like Inlet Road, where the wind funnel effect off Lake Worth Inlet demands a tighter screw schedule than mainland neighborhoods like Lake Park. Metal roofs also carry excellent wind uplift ratings, which matters when you’re documenting wind mitigation for insurance credits.

Tile Roofing Systems

Barrel and flat tile roofs appear on many of the custom and newer construction homes in Palm Beach Shores. Tile handles salt air well, but the underlayment and fastening method determine whether it survives a Category 3 event or ends up in your neighbor’s pool. We install tile systems with HVHZ-compliant attachment methods, including foam or mechanically fastened underlayment built for the high windzone this town occupies. Cracked or displaced tiles get replaced with proper matching from our local supplier network.

Roof-to-Wall Flashing and Wind Mitigation Upgrades

This is the work that separates a code-compliant Palm Beach Shores roof from one that fails a wind mitigation inspection. Unsealed roof-to-wall connections on concrete block homes allow pressurized salt air into the attic, which corrodes truss plates and compromises uplift resistance over time. We install impact-rated flashing and sealant systems at every transition point, then photograph and document the work for your insurance provider. That documentation is what turns a roof replacement into a premium reduction.

Trusted Brands We Service in Palm Beach Shores

Winslow Windows & Doors is an authorized installer for PGT, CGI, Therma-Tru, plus four additional premium brands. Why does that matter for a roofing page? Because a properly rated roof in Palm Beach Shores needs properly rated fenestration below it. When we replace a shingle or metal roof on a 1960s block home, we often find the original single-pane aluminum frames corroded through at the corners and sill weep channels. We can pair your new roof with PGT or CGI impact-rated units that carry the Miami-Dade NOA numbers your wind mitigation report requires. One crew, one warranty, one contractor accountable for the whole envelope. We keep local stock of common flashings, fasteners, and edge metals for fast turnaround on Palm Beach Shores jobs.

Common Shingle, Tile & Metal Roofing Problems We See in Palm Beach Shores Homes

• Corroded aluminum roof edges and fasteners. Salt spray from the Atlantic on one side and Lake Worth Inlet on the other pushes metal failure a full decade ahead of mainland timelines. We regularly replace drip edges and fastener heads on homes built as recently as 2005.
• Failed wind-load testing on original roofing. Many 1950s-70s roofs in Palm Beach Shores were never built for current wind zone requirements. Underlayment is stapled, not sealed, and roof-to-wall attachment lacks the uplift capacity inspectors look for today.
• Wind-driven rain intrusion through roof penetrations. The inlet’s wind funnel drives water sideways into exhaust vents, pipe boots, and ridge vents. Standard flashing doesn’t hold up. We use impact-rated, sealed penetration systems designed for high wind zone exposure.
• Pressurized salt air in attic spaces. Unsealed eaves and gable transitions let the constant barrier-island wind push salt-laden air through the attic, corroding truss plates and roof deck fasteners from the inside out. Homeowners discover it during a re-roof when the decking comes off.

Pricing for Shingle, Tile & Metal Roofing in Palm Beach Shores, FL

Palm Beach Shores roofing runs higher than mainland pricing because the code requirements are higher. A full architectural shingle roof replacement on a typical 1,800-2,200 square foot Singer Island home runs $14,000-$22,000 depending on tear-off layers, decking repair, and the HVHZ underlayment system required. Standing seam metal on the same footprint lands at $24,000-$38,000. Tile systems run $28,000-$45,000 when installed with compliant attachment. Repairs such as a corroded drip edge replacement, ridge cap reseal, or section re-flash typically run $800-$2,400 per scope. Every quote is a written line-item estimate with fixed pricing. No change orders unless you ask for a change. Call (561) 468-6136 for a free in-home measure and exact quote.

We Also Serve Cities Near Palm Beach Shores

While this page focuses on Shingle, Tile & Metal Roofing in Palm Beach Shores, our crews also cover Westgate, West Palm Beach, South Palm Beach, and Boynton Beach. If you’re just across the bridge on the mainland side, the code requirements change, and we’ll quote accordingly. But if you’re on the island, the dual-front exposure rules apply, and you want a contractor who understands that.

FAQs - Shingle, Tile & Metal Roofing in Palm Beach Shores

What Shingle, Tile & Metal Roofing Costs in Palm Beach Shores

Beyond the roof covering itself, Palm Beach Shores homeowners often pair roofing work with impact window replacement, so here are the anchors you need. Impact windows in this town run $800-$1,500 per window installed, with impact single-hung units at $900-$1,800 and large or custom openings at $2,500-$5,000. Whole-home impact window packages on Singer Island typically run $8,000-$25,000 or more depending on opening count, floor height, frame material, and wind zone requirements. What moves the price in Palm Beach Shores specifically: parcel proximity to the inlet or Atlantic, second-story work with lift access, concrete block anchor details, and the Miami-Dade NOA product selections your wind exposure category demands. We provide a free in-home measure and written line-item quote so you see exactly what you’re paying for. Call (561) 468-6136 to schedule.

Florida Pays You Back

Palm Beach Shores homeowners have access to three separate incentive programs that stack. My Safe Florida Home matching grants offer up to $10,000 for qualifying wind-mitigation upgrades, including roof replacement and impact-rated fenestration. Florida’s sales-tax exemption applies to impact-resistant windows and doors, which removes the sales tax on qualifying product. And the federal 25C energy credit returns 30% of the product cost, up to $600 per year, on qualifying energy-efficient units. After installation, a wind mitigation inspection typically costs $75-$150 and produces the documentation for windstorm premium credits. Many Palm Beach Shores homeowners see an average reduction around 25% on the windstorm portion of their premium. We can’t guarantee your specific credit or carrier decision, but we prepare every job with the documentation required to apply. Call (561) 468-6136 for a free estimate and we’ll explain which programs apply to your property.

Impact Windows Versus Hurricane Shutters

Some Palm Beach Shores homeowners ask us whether they should install impact windows or stick with shutters. Shutters are cheaper upfront and can meet code, but they only work when someone is home to deploy them. If a storm approaches while you’re away for the summer, those shutters do nothing. Impact windows provide permanent protection with no panels to hang and no storage to manage. In a town where every property sits within a few hundred feet of open water, permanent protection carries real weight. Pair impact windows with a compliant roof, and your entire envelope resists the storm whether you’re home or not.

The Wind-Load Reality on Singer Island

Palm Beach Shores occupies the southern tip of Singer Island, a narrow barrier strip where every property sits within a few hundred feet of both the Atlantic Ocean to the east and Lake Worth Inlet to the west. That dual-front exposure means your roof experiences wind pressure from two directions, often within the same storm, and salt spray from both bodies of water. Most of the housing stock here consists of mid-century concrete block construction from the 1950s through 1970s, with original roofing systems that were never engineered for current HVHZ wind loads. Installing a compliant shingle, tile, or metal roof in Palm Beach Shores isn’t a cosmetic upgrade. It’s the difference between a roof that keeps its underlayment intact in a named storm and one that peels off a deck and exposes your home to water intrusion in the first hour of the event. We quote every Palm Beach Shores job to the actual wind zone, not a generic Palm Beach County standard, because this town is not generic.

Call (561) 468-6136 to schedule your free in-home estimate. We’ll inspect your current roof, explain what the code requires for your specific parcel, and put a written quote in your hand before we leave. The one down the road.

Written by Ed Winslow, Owner at Winslow Windows & Doors, serving Palm Beach Shores since 2011.