Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Fast, Reliable Roof Replacement & Installation Across Palm Springs
Roof replacement in Palm Springs, FL typically runs $12,000-$28,000 for a standard CBS ranch home, and the single biggest cost driver is not the shingles or tile. It is the wind zone. Palm Springs sits inside Palm Beach County’s HVHZ (High Velocity Hurricane Zone), which means every roof replacement here must meet Miami-Dade NOA or Florida Product Approval standards for wind uplift and large-missile impact. That changes the underlayment, the fasteners, the decking, and the tie-downs. If you’re pricing a roof in this village, call (561) 468-6136 for a free in-home measure and a written line-item quote. We’re Roof Replacement & Installation specialists who have worked on dozens of these 1950s-1970s block homes, and we know exactly what the inspector will check before we ever pull up a truck.

Key Takeaways:
- Palm Springs is in the HVHZ. Miami-Dade NOA compliance is non-negotiable on every roof job here.
- Most homes are CBS block construction, not wood frame. That changes how the roof deck is anchored and sealed.
- Legacy jalousie window openings can block your wind mitigation insurance credits if they’re not addressed during the roof replacement.
- Ed Winslow has been doing this since 2011. Live people answer our phones 24/7, and every job carries the Done Right Promise.
Why Winslow Windows & Doors Is Palm Springs’s Preferred Roof Replacement & Installation Company
We are the one down the road. Winslow Windows & Doors has been locally owned and owner-operated since 2011, and Ed Winslow’s name is on the door and on every job we do in Palm Springs. That is not marketing fluff. It means when a roof fails inspection or a homeowner notices a leak three months after we leave, Ed hears about it. And Ed fixes it. The Done Right Promise is the only warranty language we use: if it’s not done right, we make it right. No fine print, no claim department, no runaround.
Palm Springs homeowners call us because they have been burned before. They hired someone with a nice truck and a vague estimate, and six months later the roof leaked or the county flagged the underlayment. We hear those stories on nearly every estimate. Our answer is the same every time: a written line-item quote before any work starts, a published address and license number, background-checked uniformed technicians, and a live person answering the phone at 2 a.m. if a storm tears through the village. Nobody in Palm Springs should have to wonder who is actually doing the work or whether the roof will pass inspection. Call (561) 468-6136 and you will talk to a real person. That is how we have operated for over 15 years.
We also know the specific failure points on Palm Springs homes because we have fixed them. Homes along 10th Avenue North, Lake Worth Road, and the streets off Congress Avenue were built in the same era with the same materials. The roof deck is tied to concrete block with anchors that have been corroding for 50 years. The original underlayment was never rated for missile impact. And the jalousie windows on the carport still do not meet code. We scope all of that before we quote. That is the difference between a roofer who happens to work in Palm Springs and a local company that knows exactly what this village’s housing stock demands.
Our Roof Replacement & Installation Services in Palm Springs
Every roof replacement we do in Palm Springs starts with a careful look at the structure underneath. On most of these CBS ranch homes, the real work is what you cannot see from the street. Here is what that means in practice.
Impact-Rated Roof Decking and Underlayment
Palm Springs is less than two miles from the Lake Worth Lagoon, and the salt-laden air here accelerates corrosion on fasteners, flashing, and decking faster than inland communities. That is why we do not reuse old metal or hope the existing deck will pass. We install Miami-Dade NOA-rated underlayment and impact-rated decking on every replacement. This is not an upsell. It is the minimum standard for a home in the HVHZ, and skipping it means failing the first county inspection. On the eastern streets near Military Trail, we routinely see threshold pans and fasteners that have corroded to the point of failure within a decade. A roof on those homes needs full fastener replacement, not just new shingles over old metal.

Wind Mitigation Retrofit Coordination
A new roof is the single best opportunity to earn windstorm insurance credits in Palm Springs. After a wind mitigation inspection, the credits on the windstorm portion of your premium often average around 25%. But you do not get those credits if the roof-to-wall connection is weak or if the original jalousie window openings remain non-compliant. We coordinate the entire retrofit: upgrading roof-to-wall tie-downs to meet Miami-Dade NOA standards, correcting any openings that block full wind mitigation credits, and scheduling the wind mitigation inspection after the work is done. Most inspectors charge $75-$150, and we help you understand the report before you file it with your carrier.

Miami-Dade NOA Compliant Roof-to-Wall Tie-Down Upgrades
On a CBS block home, the roof deck is anchored to masonry with straps or bolts that were often undersized when the home was built. Wind uplift during a storm pulls the deck away from the block, and that is how roofs fail in Palm Springs. We inspect every anchor point, replace corroded straps, and add fasteners where the original spacing was inadequate. This is tedious work that happens mostly in the attic, but it is the difference between a roof that looks good and a roof that stays on during a Category 4 storm. It is also what the inspector will check first.

Full Roof Replacement for CBS Ranch Homes
Most Palm Springs homes are modest, affordable ranch houses built during the postwar boom. The concrete block walls are solid, but the roof system around them was not built for modern wind standards. We handle full tear-off and replacement, whether you want shingle, tile, or metal. We also handle the masonry openings properly: backer rod, foam, and anchor-screw spacing that works on block, not wood. Crews who mostly do wood frame homes in other parts of the county routinely get this wrong here, and the result is water intrusion and uplift failures. We have done enough Palm Springs roofs to do it right the first time.

What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Palm Springs
We are authorized installers for eight premium brands, and on Palm Springs roofs we most often recommend PGT, CGI, and CWS for impact-rated openings and tie-ins. These are brands with published Miami-Dade NOA and Florida Product Approval numbers for their configurations, so we can match the design pressure rating to the exact opening and wind zone rather than guessing. Since we stock common parts for Palm Springs customers and our crews work in this village regularly, turnaround stays tight once materials arrive. Custom fabrication of impact-rated units typically runs 4-6 weeks from order to install. Standard units can often be installed in as fast as a single day once they are on hand. If you want a roof replacement paired with new PGT windows and doors to close out every wind mitigation line item, we do that too.
Common Roof Replacement & Installation Problems We See in Palm Springs Homes
- Corroded roof-to-wall anchors on CBS block. Decades of salt air from the Intracoastal have eaten through the original straps and bolts. We replace them all, because one failed anchor is a roof that lifts off the wall.
- Non-rated underlayment from previous “budget” replacements. A previous owner hired someone who used standard underlayment to save a few hundred dollars. It fails the county inspection, and now the whole roof has to come off again. We fix it properly the first time.
- Jalousie window openings killing wind mitigation credits. If your carport or Florida room still has glass louvers, those openings are non-compliant. That can disqualify the whole home from full wind mitigation insurance credits even with a brand new roof. We reframe those openings during the roof job so everything passes together.
- Improper deck-to-block sealing. Wood-frame techs often use techniques that do not work on masonry. Water gets in around the edges, and the roof deck starts to rot from the inside. We use backer rod and foam sealing methods specific to concrete block construction.
Pricing for Roof Replacement & Installation in Palm Springs, FL
Here are honest numbers for this village. A standard shingle roof replacement on a 1,400-1,800 square foot CBS ranch in Palm Springs runs $12,000-$18,000. Tile roofs on the same footprint run $20,000-$28,000. Metal standing-seam runs $18,000-$26,000 depending on gauge and profile. These are not “starting at” prices. They reflect the full scope: tear-off, Miami-Dade NOA underlayment and fasteners, decking where required, tie-down upgrades, and disposal. What moves the price up in Palm Springs specifically? Damaged or corroded anchors that need full replacement. Roof deck rot from years of blocked drainage. Jacuzzi-era additions with mismatched framing. And the need to reframe jalousie window openings for code compliance. We give you a written line-item quote before any work starts, so you see exactly where the money goes. Call (561) 468-6136 to schedule your free estimate.
What Roof Replacement & Installation Costs in Palm Springs
Roof replacement is a different purchase than windows or doors, but the logic is the same. The cost is driven by the opening area, the wind zone, and the condition of what is underneath. For impact windows and doors, the typical installed ranges are: impact windows generally $800-$1,500 per window; impact single-hung $900-$1,800; large or custom openings $2,500-$5,000; and whole-home packages $8,000-$25,000 or more. Pairing a roof replacement with impact window and door work in Palm Springs often makes financial sense, because you close out every wind mitigation line item in one pass and one inspection. We provide a free in-home measure and a written quote. No change orders, no vague allowances. Fixed pricing with written line items, and permits pulled and inspections passed.

One thing worth knowing: we are not a big-box retail installer. Those outfits often subcontract to crews who do not know Palm Beach County’s HVHZ code and will not be the ones on the hook when the inspection fails. We are the licensed impact specialist you call directly. When Ed Winslow’s name is on the job, the person accountable is the person you talked to on the phone.
Florida Pays You Back
Palm Springs homeowners can stack incentives that reduce the real cost of a new roof. The My Safe Florida Home program offers matching grants up to $10,000 for qualifying wind-mitigation upgrades, including roof-to-wall tie-down improvements and impact-rated openings. Florida also exempts impact-resistant windows and doors from sales tax. The federal 25C energy credit can add 30% of the product cost on qualifying units, up to $600 per year. And after a wind-mitigation inspection, windstorm-premium credits typically average around 25% on the windstorm portion of your premium. That inspection usually runs $75-$150. We cannot guarantee the final numbers for any program or carrier; they set their own terms. But we can tell you this: a Palm Springs roof that does not meet HVHZ standards will not qualify for any of it. We make sure yours does.
Serving Palm Springs, FL - Our Local Coverage Area
We’re based in the Palm Springs area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Roof Replacement & Installation in Palm Springs
Palm Springs enforces Palm Beach County’s building code, and a roof replacement on a CBS home requires a permit issued by the village with county oversight on the wind-load requirements. You cannot use a generic county permit from an unincorporated area; the village verifies Miami-Dade NOA or Florida Product Approval compliance on every roof. We pull the permit, and we know what the inspector checks before we start.
The new roof edge following the existing building footprint rarely creates a new setback issue, since we are replacing the roof on the existing structure rather than expanding it. If you want to extend the roofline or add a covered carport or Florida room, then septic and well setbacks come into play. We scope that before quoting so you are not surprised by a denial later. Call (561) 468-6136 for an exact answer on your lot.
Yes, in most cases it will. The key is that the roof must be paired with compliant openings, which is why legacy jalousie windows often block the credit even with a new roof. After the work is done, a wind mitigation inspection documents the improvements, and the credits on the windstorm portion average around 25%. We coordinate that inspection and help you file the report correctly.
It may not block the roof permit itself, but it will block your wind mitigation credits, because the entire home must meet the opening-protection standard to qualify. We routinely reframe those jalousie openings with impact-rated PGT or CGI units during the same job, so the roof and the openings pass together. It costs more up front but saves you real money on insurance year after year.
Short answer: Miami-Dade NOA is the stricter standard, and in the HVHZ, it is the one that matters. Florida Product Approval is valid statewide but covers a broader range of products, some of which are not approved for the High Velocity Hurricane Zone. A roof in Palm Springs needs components and tie-downs with Miami-Dade NOA numbers specific to the configuration you are installing. If a contractor cannot give you those numbers, walk away. We can, and we put them in writing before any work begins.
Building on Acreage Around Palm Springs
About a third of our roof replacement work in this area is not on village lots. It is on acreage just outside Palm Springs, where the permitting path is Palm Beach County rather than the village, and the building site has its own set of rules. Septic and well setbacks dictate how close a new roof edge or a detached carport can sit to the drain field or the wellhead. Long material hauls and narrow equipment access add to the logistics, and on open lots with older outbuildings, shops, or detached ADUs, each structure has its own wind-mitigation status and its own inspection requirements.
Grading and drainage matter here too. On an open lot, runoff from a new roof has to go somewhere, and a roof that dumps water toward the house or the septic field creates problems the inspector will flag and your foundation will feel. We scope grading before we quote, not after. If you have a main house plus a detached garage, a workshop, and a carport, we give you one written quote that covers every structure and every permit, so there is no surprise line item later.
On a ranch home along 10th Avenue North, our crew replaced a deteriorating shingle roof over a CBS block structure where the original jalousie windows had left the home non-compliant for wind mitigation. We installed a new standing-seam metal roof with Miami-Dade NOA-rated underlayment and integrated impact-rated decking, then reframed the adjacent carport opening to accept PGT impact-rated casement windows, correcting both the roof and the opening’s design pressure rating. That is the job in a single story: the roof and the openings have to work together, or neither one passes. We do both.
What you will not find on our quotes is a pile of vague allowances. We give you fixed pricing, written line items, permits pulled, and inspections passed. No change orders once the number is signed. Ed’s name is on the door, and on every roof we put over your head.
Call (561) 468-6136 to schedule your free roof replacement estimate in Palm Springs. A live person answers, day or night.
Written by Ed Winslow, Owner at Winslow Windows & Doors, serving Palm Springs and surrounding communities since 2011.
Six Reasons Homeowners Choose Winslow Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.










Before
After
Before
After
Before
After