Custom & Geometric Windows in Wellington - Free In-Home Measure, Written Price

Fast, Reliable Custom & Geometric Windows Across Wellington

Custom and geometric window work in Wellington is rarely a simple swap. Most 1980s concrete-block homes here were built with non-rectangular aluminum openings that have no Florida Product Approval number, and insurers are actively flagging them. We measure, engineer, permit, and install impact-rated shaped windows that meet Palm Beach County wind-borne debris codes. Call (561) 468-6136 for a free in-home measure and line-item quote, and we’ll walk the openings with you before you spend a dollar.

Call (561) 468-6136

Why Winslow Windows & Doors Is Wellington’s Preferred Custom & Geometric Windows Company

Ed Winslow founded this company in 2011 and put his name on it. That means the crew that shows up at your Wellington door is background-checked, uniformed, and accountable to a real owner, not a call-center queue. We’ve worked Greenview Shores, Palm Beach Polo, and the equestrian estates along South Shore Boulevard, and we know which HOA architectural-review boards want drawings before the first cut and which will accept a change-order on site. Homeowners here call us back because we show up when we say we will and we answer the phone like a neighbor, 24/7, live.

Response to Wellington is same-day for measure requests in most cases. Our techs know the village’s permit counters and the specific documentation Wellington’s building department wants for shaped impact openings. We carry a published address and license number, and we never hide behind a subcontractor. The difference between us and the national chains is simple: when something goes sideways on a radius window in a 30-year-old jamb, Ed picks up the phone, not a ticket number.

Our Custom & Geometric Windows Services in Wellington

Every shaped opening on a Wellington home has to answer two questions at once: does the glass carry Florida Product Approval, and can the frame actually hold it in a wind-borne debris event. We handle both. Here’s what we do most in this area:

Custom Impact Windows

Wellington sits inside Palm Beach County’s designated Wind-Borne Debris Region, so every new window must meet High-Velocity Hurricane Zone impact standards. Custom impact units are built to the exact rough opening dimensions of your home, not shimmed into a stock frame. For 1980s tract homes in communities like Greenview Shores, where original openings have drifted and shifted over decades, that matters more than most people realize. A custom impact window with the right jamb extension seals tight; a stock unit forced into an old opening leaks at the sill within a year.

Geometric & Shaped Windows

Triangles, trapezoids, pentagons, octagons, and fixed half-rounds over entry doors and stair landings. These are common in Wellington’s late-1970s through mid-1990s ranch and two-story builds. The original aluminum units are oxidizing and losing their thermal seals, and many have no approval number because they predate strict wind-code enforcement. When an insurer sends a 30-day compliance notice, a shaped window can’t be patched with a sash repair. It has to be replaced with an engineered impact unit.

Arched & Curved Windows

Arched and radius windows are the most unforgiving openings on a Wellington home. A true radius unit is fabricated to the curve of the original rough opening, often with a custom jamb extension because concrete-block openings settle unevenly over 40 years. We install arched impact windows from PGT and CGI with Miami-Dade NOA certification, sized to the actual radius, not a close approximation. On a Palm Beach Polo tract home, we replaced a failed half-round over the front entry with a PGT custom arched impact unit, reframed the dry-rotted jamb, and installed the laminated-glass sash the same day the homeowner’s insurance compliance notice expired. The attached neighbor got a party-wall notice before our crew staged any materials in the shared driveway.

Oversized Openings

Wellington’s equestrian estates and larger two-story homes often call for openings that can’t be served off a rack. Oversized impact sliding glass doors, floor-to-ceiling fixed glass, and wide arched transoms all fall into this category. These units run heavier and require more careful staging, especially on zero-lot-line lots where side-yard clearance is measured in feet. We coordinate street or driveway staging with the village when a right-of-way permit is required, and we schedule the crane or lift crew around your HOA’s construction hours.

Every job connects back to our Custom & Geometric Windows team, which handles the engineering, permitting, and installation from measure to final inspection.

Trusted Brands We Service in Wellington

We’re an authorized installer for PGT, CGI, CWS, and ES Windows, among others. For Wellington homeowners, that means the warranty on your custom impact window is backed by the manufacturer and by the Done Right Promise: if it’s not done right, we make it right. We carry common gaskets, rollers, and hardware for these lines, which speeds up replacements when an existing unit fails between jobs. Custom fabrication for arched and geometric units typically runs four to six weeks, and once your units arrive we can install in as fast as a single day.

Common Custom & Geometric Windows Problems We See in Wellington Homes

• Non-rectangular originals with no Florida Product Approval number. These are all over 1980s Wellington subdivisions, and insurers now flag them during home inspections. The compliance letter that follows typically requires full replacement, not a sash or seal repair.
• Seal failure and frame oxidation from year-round humidity and UV. Wellington’s inland position gets intense sun without the ocean breeze to move moisture off the glass. Weatherstripping and thermal seals on 30-to-50-year-old aluminum units fail faster here than in more temperate markets, and once the seal goes, the glass fogs permanently.
• Shifted concrete-block openings causing sill leaks. Original arched and curved openings settle over decades, and a new impact unit installed without a custom jamb extension will leak at the sill in the first wet season. We measure each opening for drift before ordering glass.
• Failed rollers and oxidized tracks on original sliding glass doors. Nearly every 1980s Wellington patio has one. What starts as a simple roller repair call converts on site into a full impact-rated door replacement once the tech confirms there’s no approval number on the unit and the carrier’s 30-day notice is already sitting on the kitchen counter.

Pricing for Custom & Geometric Windows in Wellington, FL

What Custom & Geometric Windows Costs in Wellington

We already put the per-unit ranges above, but the real question most Wellington homeowners ask is “what’s the all-in number for my house?” For a typical 1980s three-bedroom concrete-block with four rectangular openings, one arched front entry window, and a sliding patio door, you’re looking at $14,000 to $22,000 for full impact replacement. A Palm Beach Polo two-story with more openings runs $18,000 to $30,000. Equestrian estate homes with large-format sliders and oversized custom entry systems can push past $40,000.

The variables that matter in Wellington are opening count, whether the home is one or two stories, frame material, and how far the original jamb has drifted. A home that’s been well-maintained with minimal opening shift costs less to retrofit than one where every arched jamb needs reframing. We also see HOA architectural-review timelines add a week or two to permitting in the golf communities, which doesn’t change cost but does change the schedule. We give you a written number after the measure, not an estimate someone pulls out of the air on the phone.

Florida Pays You Back

Wellington homeowners have access to several programs that offset impact window and door costs. The My Safe Florida Home program offers matching grants up to $10,000 for qualifying wind-mitigation upgrades, and impact-resistant windows and doors are a primary eligible category. Florida also exempts impact-rated products from state sales tax. On the federal side, the 25C energy credit returns 30% of product cost on qualifying units, up to $600 per year. After installation, a wind-mitigation inspection ($75-$150) typically unlocks windstorm-premium credits averaging around 25% on the windstorm portion of your policy. The actual numbers come from your carrier and the program administrator, not from us, but we’ll point you to the right paperwork and document every installation so the credits are claimable.

We Also Serve Cities Near Wellington

Our Custom & Geometric Windows in Wellington work regularly takes us into neighboring Royal Palm Beach, Greenacres, West Palm Beach, and Palm Beach Gardens. If you’re in any of those areas with a shaped opening that needs impact rating, call us, we’ll measure it and give you a straight number.

FAQs - Custom & Geometric Windows in Wellington

Wellington’s Specific Window Challenge: Density, Deadlines, and Original Openings

Wellington’s 1980s concrete-block subdivisions are dense enough that most custom and geometric window projects involve non-standard openings on homes under active insurer non-renewal deadlines. That forces us to engineer and install impact-rated shaped units while managing tight side-yard clearance and HOA architectural-review timelines, a density-driven permit and access equation that doesn’t exist in nearby Loxahatchee Groves or Royal Palm Beach. On a Palm Beach Polo lot, for instance, the side yard might be six feet wide, the neighbor’s wall is fifteen feet from your rough opening, and the architectural board wants drawings before the permit application goes in. We manage all three at once.

Meanwhile, the original aluminum sliding glass doors on nearly every back patio in these subdivisions have failed rollers, oxidized tracks, and single-pane glass that insurers flag during home inspections. What a homeowner calls in as a simple roller repair routinely converts on site into a full impact-rated door replacement the moment our tech confirms the unit has no Florida Product Approval number and the carrier’s 30-day compliance notice is on the kitchen counter. That’s not a scare tactic, it’s what we see weekly in Wellington.

Wellington’s master-planned residential boom from the mid-1970s through the 1990s produced dense subdivisions of concrete-block homes still fitted with original aluminum single-pane windows and sliding glass doors, units now 30 to 50 years old and failing precisely as Palm Beach County’s collapsing property-insurance market forces owners to demonstrate impact-rated openings or face policy non-renewal. No neighboring city combines this same concentrated wave of aging aluminum fenestration with the acute, insurance-deadline-driven urgency for full impact-glass replacement under Palm Beach County’s wind-borne debris region codes.

Located roughly 15 miles inland, Wellington sits in that wind-borne debris region where every new window and door installation must carry Florida Product Approval or meet High-Velocity Hurricane Zone impact standards. The region’s intense UV radiation and year-round humidity also destroy weatherstripping, frame gaskets, and thermal seals on aging aluminum units faster than in more temperate climates. So the aging inventory problem compounds: the sun and moisture are wearing out the very units that no longer meet code.

How We Handle Tight Wellington Lots

Working on a tight Wellington lot means staging and parking become part of the quote. We can’t park a box truck across a neighbor’s driveway, and we can’t spread material across a six-foot side yard that’s already holding an AC condenser. Before you sign anything, we walk the site and figure out where panels stage, where the cut station goes, and how debris moves to the truck. That plan is in writing.

Shared walls and party-wall notice matter in attached and zero-lot-line builds. We notify the adjacent owner before we touch a shared-wall jamb, and we coordinate work hours with HOA rules so the noise doesn’t become a board complaint. Village noise and work-hour ordinances are straightforward, but HOA overlays in communities like Greenview Shores or Palm Beach Polo are stricter, and we treat them as part of the permit equation.

Permit complexity grows with density. A simple rectangular replacement may clear with a homeowner’s permit, but a shaped impact window that requires reframing, jamb extension, and design-pressure documentation pulls in engineered drawings and possibly a structural review. We handle that entire chain, because the alternative is a stopped job and an insurer waiting for a compliance letter you can’t answer.

Access affects the quote, and we don’t hide it. If we need a right-of-way permit for street staging, that’s a line item. If your HOA requires a specific dumpster location or delivery window, that’s a line item. We’d rather have the number be honest up front than surprise you after the glass is ordered.

Make the Call

If you live in Wellington and you’re looking at a compliance letter, a fogged radius window, or a slider that doesn’t open without lifting the panel, (561) 468-6136 is the number to call. You’ll get a real person, 24/7. Ed’s name is on the door, and on every job we do. Free in-home measure. Written quote. Done right, or we come back. That’s the Done Right Promise.

Written by Ed Winslow, Owner at Winslow Windows & Doors.