Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Before
After
Before
After
Before
AfterGeometric & Shaped Windows in Westgate, FL
Geometric and shaped windows – circles, ovals, octagons, trapezoids, arched tops, and custom polygons – are specialty units built to fit openings that standard rectangular windows simply can’t fill. In Westgate, FL, we install and replace these windows for homes where the original builder added architectural character, and where that character now needs new glass, upgraded frames, or full impact-rated units to meet today’s codes and energy demands. Call (561) 468-6136 and a live person will answer – day, night, or weekend – to walk you through options and get a free estimate scheduled.
Winslow Windows & Doors has been handling non-standard window shapes in and around Westgate since 2011. Ed Winslow built this company on the idea that specialty work deserves the same straight talk and accountability as any routine replacement – upfront pricing, background-checked installers, and the Done Right Promise behind every job. If the finished product isn’t right, we come back and make it right. No fine print on that.
Our full range of geometric and shaped window services is part of our broader Custom & Geometric Windows in Westgate offering, which covers everything from bay windows to fully custom fabrications.
When You Need Geometric & Shaped Windows
Not every homeowner immediately recognizes when a shaped window has crossed from “cosmetic issue” to “real problem.” Here are the situations we see most often in Westgate:
- Fogged or milky glass in a circular or arched unit. Seal failure in a shaped IGU (insulated glass unit) is common in Westgate’s high-humidity environment. Once moisture gets between the panes, the glass won’t clear – it needs replacement. A round window with failed seals loses both its visual purpose and its insulating value.
- A non-impact shaped window in an otherwise impact-rated home. We see this regularly in Westgate neighborhoods where owners upgraded rectangular windows to PGT or CGI impact glass but left the original single-pane arch or circle in place. That one opening can void wind-mitigation credits and leave a structural weak point.
- Frame rot or warping on older wood-framed specialty windows. Wood frames around transom arches and palladium windows absorb moisture over South Florida’s rainy seasons. Soft corners, paint blistering, and draft infiltration around the frame edge are signs the whole unit needs to come out.
- New construction or renovation that calls for a shaped opening. If you’re adding a feature wall, converting a garage, or doing an addition in Westgate, shaped windows can add natural light without sacrificing wall structure – but only if they’re sized and installed to local code from the start.
- Energy bills that don’t match your other upgrades. A single-pane octagon or oval window above a front entry can undercut an otherwise well-sealed home envelope. Westgate’s summer heat loads are significant, and any clear glass running hot to the touch is costing you on the electric bill every month.
- Insurance inspection flags or permit requirements. Some Westgate homeowners discover during re-roofing or renovation permits that their shaped windows don’t meet current Florida Building Code wind-load standards. We help resolve those flags with properly rated replacements.
Our Geometric & Shaped Windows Process
Shaped windows require more pre-work than a standard replacement. The measurement tolerances are tighter, the lead times are longer, and the installation sequence matters more. Here’s exactly how we handle it:
- On-site assessment and precise templating. We don’t quote geometric windows from a phone description. We come to the home, measure the rough opening in multiple directions (a circle that’s 1/4 inch out of round needs to be accounted for before anything is ordered), and photograph the existing frame condition. This visit is free – no trip charge inside our home county – and it’s where we catch problems that would otherwise show up as a surprise on installation day.
- Product selection and impact-rating guidance. We walk you through the options that actually exist for your shape. PGT both carry shaped units in their impact-rated lines, and the right choice depends on your frame material, your HOA’s exterior appearance rules if applicable, and whether you’re targeting a specific wind-mitigation insurance credit. We give you a straight comparison, not a push toward the product with the highest margin.
- Order and lead-time confirmation. Custom-fabricated geometric windows are not stock items. We give you a realistic lead time in writing before you sign anything. For most shaped units ordered through our authorized manufacturer network, lead times in Westgate range from two to five weeks depending on complexity and current production schedules.
- Permit coordination. In Westgate, replacement windows that change the opening size or upgrade to impact-rated glass typically require a permit from Miami-Dade or Broward county depending on your address. We handle the permit application, provide all required product approval documentation (Florida Product Approvals for each unit), and schedule the inspection. You don’t have to navigate that yourself.
- Installation by uniformed, background-checked technicians. Every installer who shows up at your door has been background-checked and arrives in a Winslow uniform – you know exactly who is on your property before the truck pulls into your driveway. Shaped window installation is detail work: the frame must be plumb and square (or correctly shimmed to account for an out-of-square rough opening), the seal must be continuous, and the interior finish needs to look intentional, not patched.
- Final walk-through and Done Right Promise. Before we leave, we open and close every operable section, check the seal around the perimeter, confirm the glass is clean and clear, and walk you through what we did. If anything isn’t right – a caulk line that doesn’t sit clean, a frame that’s off by a fraction – we correct it on the spot. And if something surfaces later, the Done Right Promise means we come back. No argument, no invoice.
Geometric & Shaped Windows Pricing in Westgate
Geometric and shaped windows cost more than standard rectangular units of similar size. The price difference is real and worth understanding before you get quotes. Here are honest ranges for the Westgate market based on common shaped window types:
| Window Type | Estimated Installed Cost Range | Notes |
|---|---|---|
| Circle / Round (24″-36″ diameter) | $420 – $780 per unit | Impact-rated glass adds to the upper end; single-pane decorative at the lower |
| Half-round / Arch (3′ – 5′ wide) | $500 – $950 per unit | Palladium-style units with divided lights cost more than plain half-rounds |
| Oval (standard residential sizes) | $480 – $820 per unit | Frame material (aluminum vs. vinyl) affects both price and lead time |
| Octagon / Hexagon (18″-30″) | $390 – $720 per unit | Common above entry doors in Westgate subdivisions; usually fixed/non-operable |
| Trapezoid / Triangle (custom slope) | $550 – $1,100 per unit | Slope angle must match roof pitch exactly; templating visit is essential |
| Eyebrow / Custom Polygon | $700 – $1,400+ per unit | Fully custom fabrication; pricing varies significantly with complexity |
Several factors move a price within those ranges. Impact-rated laminated glass adds cost compared to standard insulated glass, but it also qualifies for Florida wind-mitigation insurance credits that can reduce your annual premium. Frame material matters too: aluminum frames are the norm in South Florida’s coastal environment, but vinyl units are available for certain shapes and can perform well in Westgate’s inland conditions. Labor complexity is the other driver – a circle window set into a masonry wall takes more time than the same window set into a wood-framed opening.
Permit fees are separate from window cost and vary by jurisdiction. We include permit coordination in our scope, but the county fee itself is passed through at cost – we don’t mark up permits.
If you’re a senior or veteran, a permanent 10% discount applies to your project. And if your total repair or replacement cost is over $200, take $40 off. Both of those are standing offers with no expiration date.
The most useful thing we can tell you before you call three other contractors: get the free estimate first, and make sure whoever is quoting has actually measured your opening. A quote given without a site visit for a shaped window is a guess, not a price. Call (561) 468-6136 – estimates are free, and we never charge a trip fee inside our home county.
Why Westgate Homeowners Choose Winslow
Westgate sits in a part of South Florida where architectural details matter to homeowners and where the climate is not forgiving to windows that weren’t installed with care. The neighborhoods west of Florida’s Turnpike in this area include homes built through several decades, and the shaped windows in those homes run from Arched & Curved Windows like decorative single-pane arches installed in the 1980s all the way to more recent impact-rated units that still need to be matched correctly when one fails.
Ed Winslow started this company in 2011 with a published address, a license number on every document, and a policy that every call gets a real person on the other end. That hasn’t changed. When something goes sideways on a job – and in 15 years of doing this, things occasionally do – Ed’s name is on the door, and on every job we do. That means the accountability is personal, not buried in a corporate chain of command.
We’re authorized installers for PGT and CGI, two manufacturers with strong product lines for Custom Impact Windows and other specialty shapes. We don’t sell or install brands we’re not authorized for – that protects the warranty chain for you. If a window fails inside the manufacturer’s warranty period, the claim is valid because the installer was authorized. That matters more than most homeowners realize until they need it.
For Westgate homeowners asking around about custom windows more broadly, our main home page covers the full scope of what we do, from impact windows to roofing.
FAQs – Geometric & Shaped Windows in Westgate
Can geometric and shaped windows be made impact-rated?
Yes, most common geometric shapes – circles, half-rounds, octagons, trapezoids – are available in impact-rated configurations from manufacturers like PGT and CGI. The key is that the specific shape and size you need must have a valid Florida Product Approval number, which we verify before anything is ordered. Not every shape comes in every size as an impact unit, which is why the templating visit matters: we confirm what’s available for your exact opening before you commit to a product. Call (561) 468-6136 and we’ll tell you upfront what your options are.
How long does it take to get a custom geometric window installed in Westgate?
From the initial site visit to completed installation, most geometric window projects in Westgate take four to seven weeks. That breaks down roughly as follows: one week for the estimate and product selection, two to five weeks for manufacturing and delivery depending on the shape’s complexity, and one to two days for installation and inspection. Permit timelines can add a week or two if the county has a backlog. We give you a realistic schedule in writing before you sign, so there are no surprises mid-project.
Do I need a permit to replace a shaped window in Westgate, FL?
In most cases, yes – particularly if you’re upgrading from a non-impact unit to an impact-rated window, or if the replacement unit changes the opening dimensions. Florida Building Code requires permits for window replacements that affect the wind-load rating of the home envelope. We handle the permit application for you, including providing all Florida Product Approval documentation to the county. You don’t need to navigate the permit office yourself. If your specific situation doesn’t require a permit, we’ll tell you that clearly and explain why.
What’s the difference between replacing a geometric window and replacing a standard rectangular window?
The main differences are measurement precision, lead time, and installation complexity. Standard windows come in stock sizes with some flexibility; shaped windows are custom-fabricated to your exact opening, so the measurement has to be right before anything is ordered. That’s why we always template on-site before quoting. Installation is also more involved because shaped openings are often in awkward locations – above entry doors, at stairwell landings, in gable ends – and the finish work around a circle or arch is more demanding than a straight-sided frame. The cost reflects that extra work, but so does the result: a shaped window that looks like it belongs in the home, not like it was retrofitted in.
Key Takeaways
- Geometric and shaped windows in Westgate typically cost $390 to $1,400+ per unit installed, depending on shape, size, glass type, and frame material.
- Impact-rated versions are available for most common shapes and can qualify your home for wind-mitigation insurance credits.
- Permits are usually required for impact upgrades or opening modifications – Winslow handles all permit coordination.
- Lead times run two to five weeks for custom fabrication, with total project time of four to seven weeks in most cases.
- Every Winslow job is backed by the Done Right Promise. If it’s not right, we come back.
- Seniors and veterans receive a permanent 10% discount. Any repair or replacement over $200 gets $40 off.
- Call (561) 468-6136 any time – live person, no voicemail, no wait until business hours.
Get a Free Estimate on Geometric & Shaped Windows in Westgate
If you have a shaped window that’s fogged, damaged, non-impact, or simply past its useful life, the next step is a site visit – not a phone quote. Geometric windows require eyes on the opening before anything meaningful can be said about price or product. We make that easy: no trip charge inside our home county, free estimate, and a real conversation with someone who knows what they’re looking at.
Winslow Windows & Doors has been part of Westgate and the surrounding South Florida communities since 2011. Ed’s name is on this business, and on every window we install. Call (561) 468-6136 today to schedule your free on-site estimate. Someone will answer.
Written by Ed Winslow, Owner at Winslow Windows & Doors, serving Westgate since 2011.
Six Reasons Homeowners Choose Winslow Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.