Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Before
After
Before
After
Before
AfterCustom Impact Windows in Westgate, FL
Custom impact windows in Westgate, FL are hurricane-rated windows built to exact, non-standard dimensions – designed for homes with arched openings, angled walls, oversized frames, or any shape that a stock window simply won’t fit. At Winslow Windows & Doors, we’ve been measuring, ordering, and installing these units since 2011, and Ed Winslow personally oversees every project that comes through our doors. Call us at (561) 468-6136 any time – a live person answers around the clock, no voicemail loops.
Westgate presents a specific set of challenges that cookie-cutter installers aren’t set up to handle. Many of the neighborhoods here – from the mid-century ranch homes near Westgate Avenue to the newer two-story builds closer to the Turnpike corridor – were built with window openings that don’t conform to today’s standard sizes. Add Florida’s South Florida Wind Zone requirements and the annual threat of named storms pushing east off the Atlantic, and you quickly see why off-the-shelf impact glass isn’t a real solution. A window that doesn’t seal its rough opening perfectly is a window that can fail at 120 mph wind pressure, no matter what the label says.
That’s where our Custom & Geometric Windows in Westgate service – and specifically, custom impact windows – fills a gap that most installers can’t or won’t touch. We work with PGT and CGI, two of Florida’s most trusted impact-rated manufacturers, to order units built to your exact opening dimensions with the laminated glass and reinforced frames that the Florida Building Code demands.
When You Need Custom Impact Windows
Not every Westgate homeowner is an obvious candidate for custom impact windows. Here are the situations where a custom build is the right call, not just a nice-to-have:
- Your opening is a non-standard size or shape. If your rough opening measures something like 47 inches wide or you have a trapezoid-shaped transom above your front door, no stock window will seal it correctly. A custom impact unit is built to that measurement down to the eighth of an inch.
- You have arched, angled, or geometric windows that currently offer zero storm protection. A lot of Westgate homes built in the 1980s and 1990s feature decorative arched windows in foyers or living rooms – beautiful, but typically single-pane glass with no impact rating. We replace them with laminated, code-compliant units that keep the look and add the protection.
- Your existing impact windows were installed improperly and failed inspection or leaked during the last rainy season. We regularly see water intrusion in Westgate homes where impact glass was installed by a crew that didn’t account for the local wind-driven rain angle. A poor seal at the frame-to-rough-opening junction is often the culprit.
- You’re upgrading from accordion shutters and want permanent protection. Shutters work, but they require deployment before every storm and they don’t help with noise, UV, or energy bills the other 11 months of the year. Custom impact windows handle all of that without a second thought.
- Your homeowner’s insurance carrier is pushing for Miami-Dade NOA-certified openings. Many carriers serving Palm Beach County are tightening requirements. A custom impact window installed to spec, with a Miami-Dade Notice of Acceptance on file, can directly affect your premium – sometimes significantly.
- You’re adding a room addition or converting a garage, and the new openings need impact protection from day one. Getting the custom window right at rough-in is far easier and less expensive than retrofitting later.
Our Custom Impact Windows Process
We don’t do vague timelines or surprise scopes. Here is exactly what working with Winslow Windows & Doors looks like, from first call to final inspection:
- On-site measurement and assessment. One of our background-checked, uniformed technicians visits your Westgate home and takes precise measurements of every opening you want addressed. We document the existing frame condition, check the rough opening for square and level, note any water damage or wood rot that would affect installation, and photograph the site. You know who’s coming before the truck pulls up – we send a technician profile in advance.
- Product specification and upfront quote. Based on your measurements, opening geometry, and wind-zone requirements, we specify the right impact unit from our authorized lineup – most commonly PGT or CGI for non-standard shapes, given their custom fabrication capabilities and Florida product approvals. You get an itemized, written quote before anything is ordered. Upfront pricing, no surprises on the invoice. If you’ve already received a written estimate from another contractor, we’ll give you a free second opinion.
- Custom fabrication order. Once you approve the quote, we place the order with the manufacturer. Custom impact windows are built to order, not pulled from a warehouse shelf. Fabrication times vary by product and complexity, but we’ll give you a realistic lead-time estimate at the quote stage – not a vague “four to eight weeks” answer after the deposit clears.
- Permit pull and scheduling. In Palm Beach County, impact window replacement typically requires a building permit. We handle the permit application, coordinate with the county, and schedule your installation around the permit approval window. You won’t be chasing paperwork or making trips to the permitting office.
- Professional installation. Our crew removes the existing window, prepares the rough opening (addressing any rot, moisture damage, or framing issues identified at the assessment), sets the new custom impact unit, applies the correct Florida-approved sealant system, and verifies operation and seal integrity before leaving the site. We clean up completely – no debris left behind.
- Final inspection and sign-off. We schedule and coordinate the county inspection. Once the inspector signs off, you receive copies of all paperwork – permit, product approvals, and our Done Right Promise documentation. If anything isn’t right at inspection or you notice an issue after we leave, we come back. That’s not a marketing line; it’s Ed’s word, in writing.
Custom Impact Windows Pricing in Westgate
Custom impact windows in Westgate typically run higher than stock units because every piece of glass is fabricated to your specific dimensions. That said, the range is wide depending on size, shape, and glass package. Here’s an honest breakdown of what drives cost and what you can expect to pay:
| Factor | Typical Range (Installed) |
|---|---|
| Small custom impact window (up to 24″ x 36″, standard shape) | $650 – $950 per window |
| Medium custom impact window (up to 48″ x 60″, rectangular) | $900 – $1,500 per window |
| Large or oversized custom impact window (60″+ or irregular shape) | $1,400 – $2,800+ per window |
| Arched or true-radius custom impact unit | $1,800 – $3,500+ per unit |
| Permit and inspection fees (Palm Beach County) | $150 – $400 depending on scope |
| Frame repair / rough opening prep (if needed) | $100 – $600 depending on condition |
A few things that move the number up or down:
- Glass package: High-performance low-e laminated glass costs more than standard clear laminate, but it meaningfully cuts cooling costs in Westgate’s near-year-round heat. ViewLux glass packages, for example, carry solar heat gain coefficients well suited to South Florida exposure.
- Frame material and color: White PVC frames cost less to fabricate than bronze or custom-color anodized aluminum. If your home’s aesthetic calls for a specific finish, budget accordingly.
- Number of units: Multi-window projects typically bring the per-unit cost down since mobilization and inspection fees are shared across more openings.
- Existing opening condition: A perfectly square, rot-free rough opening costs less to work with than one that needs re-framing. We identify this at the measurement visit so there are no surprises.
Seniors and veterans receive a permanent 10% discount on all Winslow work – no expiration date, no asterisks. And if your project qualifies as a repair over $200, the $40 off discount applies automatically. Call (561) 468-6136 for a free, no-trip-charge estimate – we’ll come to your Westgate home, measure what you have, and put real numbers in writing before you commit to anything.
Why Westgate Homeowners Choose Winslow
There are national window chains with billboard ads and call centers, and then there’s a locally owned company where the owner’s name is on the truck and on the permit. Ed Winslow has been pulling permits in Palm Beach County since 2011. He knows the inspectors, knows the local wind zone maps, and knows what Westgate’s particular mix of older construction and Florida humidity does to window frames over time.
We’re authorized installers for PGT and CGI – two manufacturers that have been building impact-rated products for Florida’s toughest weather conditions for decades. That authorization isn’t just a badge we display; it means we’ve been vetted by the manufacturer, we have access to their technical support, and our installs are covered by the manufacturer’s warranty on top of our own Done Right Promise.
That promise is simple: if it’s not done right, we make it right. Not “call our warranty department.” Not “submit a claim.” Ed comes back, or he sends his crew back, until the job is right. That’s the standard we’ve held since we opened, and it’s the reason so much of our Westgate work comes from referrals from people who live within a few miles of each other.
Every technician who works on your home is background-checked and arrives in uniform. You’ll know who’s coming before they knock. No subcontractor surprise crews, no different faces every visit.
Key Takeaways
- Custom impact windows are built to your exact opening dimensions – the right solution when stock sizes don’t fit or when you have arched, angled, or oversized openings.
- Winslow Windows & Doors has been installing custom impact windows in Westgate since 2011, authorized by PGT and CGI.
- Installed pricing in Westgate typically ranges from $650 for small standard shapes to $3,500+ for large radius or arched units.
- We handle permits, inspections, and all manufacturer paperwork – you don’t chase anything.
- The Done Right Promise, upfront pricing, live 24/7 phone, and a 10% senior/veteran discount are all permanent commitments, not promotions.
- Call (561) 468-6136 any time for a free, no-trip-charge estimate at your Westgate home.
FAQs – Custom Impact Windows in Westgate, FL
How long does it take to get custom impact windows installed in Westgate?
From signed contract to installed window, most custom impact window projects in Westgate take six to twelve weeks, with fabrication lead time being the main variable. Once we place your order with PGT or CGI, production typically runs four to eight weeks depending on glass package and shape complexity. We pull the permit during that window so we’re ready to install as soon as the units arrive. Permit turnaround in Palm Beach County currently runs one to three weeks for standard residential window replacement. We’ll give you a realistic timeline at the quote stage – not a vague estimate designed to get you to sign. Call (561) 468-6136 for a current lead-time update; it changes seasonally.
Do I need a permit for custom impact window replacement in Westgate?
Yes, impact window replacement in Palm Beach County – including Westgate – requires a building permit for most projects. The permit triggers an inspection that confirms your new windows meet Florida Building Code requirements for the local wind zone, which is what makes them legally recognized as a storm-protection upgrade for insurance purposes. We handle the permit application and inspection coordination as part of every installation. You don’t file anything or make trips to the county office. If a contractor offers to skip the permit to save time or money, that’s a red flag – an un-inspected impact window installation won’t satisfy your insurance carrier and could create liability if the window fails in a storm.
Can you replace just one custom-shaped window, or do I need to do them all at once?
We can absolutely replace a single window. There’s no minimum project size at Winslow Windows & Doors. In Westgate, we regularly handle single-opening replacements – a foyer arch here, an oversized living-room picture window there – for homeowners who are upgrading incrementally. The per-unit cost is slightly higher on a one-window project since permit and mobilization costs don’t spread across multiple units, but it’s often still the right financial move, especially when an insurance carrier is requiring a specific opening to be brought into compliance. Call us at (561) 468-6136 and we’ll run the numbers for your specific situation at no charge.
Will custom impact windows lower my homeowner’s insurance in Westgate?
Custom impact windows installed to Miami-Dade Notice of Acceptance (NOA) standards and inspected under a valid Palm Beach County permit can qualify your home for wind mitigation credits, which many insurers translate into meaningful premium reductions. The actual discount depends on your carrier, your policy, and how many openings are upgraded. After installation, we recommend scheduling a wind mitigation inspection with a licensed Florida inspector – they document what was installed and produce the report your insurer needs to recalculate your premium. We can point you toward inspectors familiar with Westgate properties, though the inspection itself is a separate engagement. The bottom line: properly installed, permitted custom impact windows are one of the few home upgrades that often pay back a portion of their cost through ongoing insurance savings.
Ready for a Free Estimate? Call Winslow Windows & Doors Today
If you have a window opening in your Westgate home that a stock impact unit won’t fit – or if you’ve been looking at an unprotected arched window or oversized opening every hurricane season and telling yourself you’ll deal with it next year – let’s put a real number on it. Call (561) 468-6136 right now. A live person will answer, we’ll schedule a free on-site measurement at your convenience, and you’ll have a written, itemized quote before we ask for anything. No trip charge in our home county. No pressure to decide on the spot.
Ed’s name is on the door – and on every job we do. That’s not a slogan; it’s the reason we’ve been the neighbor people call in Westgate since 2011. We’re not the biggest window company in South Florida, but we might be the closest one who actually answers the phone.
Explore our full Custom & Geometric Windows in Westgate service page to see every shape and configuration we handle, or visit our home page to learn more about everything Winslow Windows & Doors does for Westgate homeowners.
Written by Ed Winslow, Owner at Winslow Windows & Doors, serving Westgate since 2011.
Six Reasons Homeowners Choose Winslow Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.