Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Before
After
Before
After
Before
AfterEntry Doors in Westgate, FL
Entry door installation in Westgate, FL typically runs between $800 and $3,200 installed, depending on the door material, impact rating, and frame condition. Most jobs take a single day, and the right door makes an immediate difference in curb appeal, energy costs, and how secure your home actually feels. At Winslow Windows & Doors, Ed Winslow has been overseeing our Door Installation services across Westgate and the surrounding communities since 2011 – and his name is on every job we do.
If you’ve been putting off replacing a drafty, warped, or outdated front door, Westgate’s climate makes that a decision worth revisiting sooner rather than later. For many homes, Replacement Doors aren’t just a cosmetic upgrade-they’re essential to keeping your home sealed and secure. Humidity, salt air, and the occasional severe storm do real work on exterior doors here. A door that fit fine in 2016 may be letting conditioned air escape, swelling at the frame through every rainy season, or simply failing to meet current South Florida wind-load requirements. That’s not a cosmetic problem – it’s a performance problem, and sometimes a safety one.
We handle the full scope: measurement, product selection from brands like Therma-Tru and PGT, permit coordination where required, installation, and final weatherstripping and hardware fitting. We are a locally owned alternative to the big-box installers who hand you a ticket number – when you call (561) 468-6136, a live person answers, every hour of every day. You can also browse our full Door Installation in Westgate service page to see everything we cover beyond entry doors.
When You Need a New Entry Door
There’s rarely one single moment when a door “fails.” It’s usually a slow accumulation of small frustrations that finally tips over into a real problem. Here are the most common situations we see in Westgate homes:
- Visible daylight around the frame. If you can see light between the door and the jamb with the door closed, conditioned air is escaping the same way. In a Westgate summer, that gap is costing you money every day.
- Sticking, dragging, or difficult operation. Wood and even some composite doors shift and swell during Westgate’s rainy season (May through October). If you’re throwing your shoulder into the door to open or close it, the frame or slab has moved and the issue will worsen over time.
- Dents, cracks, or delamination on the door surface. Beyond aesthetics, surface damage compromises the door’s insulating core and – on steel or fiberglass doors – can allow moisture into the panel layers, leading to internal rot or rust.
- A door that isn’t impact-rated. Miami-Dade and Broward wind-load codes have tightened considerably since 2011. Many Westgate homes built in the 1990s still have standard doors that don’t meet current requirements. An impact-rated entry door from PGT or Therma-Tru removes the need for storm shutters at the front entry and can lower your wind mitigation insurance credit.
- An outdated look that’s dragging down your home’s value. Real estate agents consistently list the front door as one of the highest-return exterior upgrades before a sale. We work in neighborhoods throughout western Westgate regularly and can tell you – a new Therma-Tru fiberglass door in the right style reads completely differently from the street than a painted-over hollow-core original.
- Hardware, lock set, or hinge failures. If the lockset is stiff, the deadbolt doesn’t throw cleanly, or you’ve noticed hinge screws pulling out of the jamb, a new door paired with a proper installation fixes the structural root of those problems rather than patching symptoms.
Our Entry Doors Process
We’ve refined this over more than 15 years of installs across Westgate and surrounding communities. The steps below are what every customer gets – no shortcuts, no subcontracted strangers showing up unannounced.
- Free on-site measurement and assessment. We come to your Westgate home, measure the rough opening, inspect the existing frame and jamb, and assess whether the current framing is solid enough to accept a new slab directly or needs repairs first. There’s no trip charge for homes within our home county. We bring samples and door spec sheets so you can see and feel the options before any decision is made.
- Upfront written quote – same visit or within 24 hours. You get a line-item quote with no vague allowances. Every cost is named before you agree to anything. If you have a written estimate from another contractor, we’ll give you a free second opinion on it – that’s a standing offer, not a promotional one.
- Product selection and permit coordination. Once you approve the quote, we order your door from the manufacturer – most Therma-Tru and PGT units arrive in one to two weeks for standard sizes, longer for custom widths. Where the municipality requires a permit for structural door replacement, we handle the application. We know Westgate’s local requirements and don’t leave that paperwork to the homeowner.
- Old door removal and frame preparation. On install day, a background-checked, uniformed Winslow technician (you’ll know their name before they arrive) removes the existing door and inspects the rough opening. If we find rot in the sub-frame, threshold, or sill – which happens more often than people expect in homes near the drainage areas in western Westgate – we address it before the new door goes in. Installing a new door over a rotted frame is how you end up with the same problems in two years.
- Installation, shimming, and weatherstripping. The new door slab and frame are set level and plumb, shimmed to spec, fastened according to manufacturer requirements, and fully weatherstripped. For impact-rated doors, we verify the installation meets the product’s Miami-Dade NOA (Notice of Acceptance) requirements – that matters for your insurance.
- Hardware fitting, final adjustment, and walkthrough. We fit the lockset, deadbolt, hinges, and any smart-lock prep you’ve requested. We adjust the door for smooth operation, then walk you through everything before we leave. If anything isn’t right, we fix it on the spot. That’s the Done Right Promise – if it’s not done right, we make it right. Not a 90-day workmanship clause. A commitment with no expiration date.
Entry Doors Pricing in Westgate
Entry door installation costs in Westgate depend on four main variables: the door material and construction, whether it’s impact-rated, the condition of the existing frame, and the hardware and finish you choose. Below are honest ranges based on what we actually see in this market.
| Door Type | Installed Price Range (Westgate) |
|---|---|
| Fiberglass entry door (non-impact, standard size) | $800 – $1,400 |
| Fiberglass entry door (impact-rated, Therma-Tru) | $1,400 – $2,400 |
| Steel entry door (non-impact, standard) | $750 – $1,200 |
| Impact-rated steel door (PGT or equivalent) | $1,300 – $2,200 |
| Custom or oversized entry door (fiberglass or steel) | $2,200 – $3,200+ |
| Frame or sill rot repair (if needed) | $150 – $500 additional |
A few things that move that number up or down:
- Frame condition. Homes in parts of Westgate with older construction or that have had water intrusion around the threshold often need partial or full frame replacement. We assess this during the free measurement visit – you’ll know before you commit.
- Impact vs. non-impact. The premium for a Miami-Dade-rated impact door over a standard unit typically runs $400 to $800, but the insurance savings and shutter elimination often close that gap faster than homeowners expect.
- Hardware and finish. A Schlage or Emtek lockset in a premium finish adds $100 to $400 over a builder-grade option. We carry a range and can show you what’s in stock.
- Permit fees. Where permits are required, municipality fees are passed through at cost – we don’t mark up permit fees.
If your repair or service total exceeds $200, our standing $40 off any repair over $200 discount applies automatically. Seniors and veterans receive a permanent 10% discount on any job. Call (561) 468-6136 for a free, no-pressure estimate – an actual number, not a ballpark range that doubles by invoice day.
Key Takeaways on Cost
- Most standard entry door installs in Westgate fall between $800 and $2,400 installed.
- Impact-rated doors cost more upfront but often reduce insurance premiums and remove the need for storm shutters at the entry.
- Frame repairs are common in older Westgate homes – we flag them before the job starts, not after.
- Estimates are free, upfront, and in writing. No trip charge in our home county.
FAQs – Entry Doors in Westgate
How long does entry door installation take in Westgate?
Most single entry door installations take between three and six hours on the day of install. If the existing frame needs rot repair or the opening requires modification for a custom-size door, the job may extend to a full day. We’ll tell you the realistic time estimate when we do the initial measurement – not a vague “half to full day” window. For standard-sized fiberglass or steel door swaps on solid frames, most Westgate customers have a fully operational new door by early afternoon.
Do I need a permit to replace my entry door in Westgate?
Permit requirements depend on whether you’re doing a like-for-like replacement or changing the opening size, and on the specific jurisdiction covering your Westgate address. Many straightforward door-for-door swaps don’t require a full permit, but impact-rated installations in particular may trigger a review to verify Miami-Dade NOA compliance. We handle this determination and the application process for you – you don’t need to figure out the municipal rules on your own. We’ve been navigating local code requirements in this area since 2011.
Is fiberglass or steel better for a Florida entry door?
For most Westgate homes, fiberglass is the stronger long-term choice for Hurricane-Proof Front & Entry Doors. Fiberglass – especially Therma-Tru’s premium lines – resists the humidity and heat cycling that cause steel doors to develop surface rust and wood doors to warp. Steel is a solid, cost-effective option on a tighter budget and performs well on shaded entryways with good overhang protection, but on a west-facing Westgate entry getting full afternoon sun, fiberglass holds up significantly better over a decade. We’ll tell you honestly which material suits your specific exposure rather than defaulting to whichever costs more.
Can Winslow install an impact-rated entry door that also qualifies for an insurance discount?
Yes. As an authorized installer for PGT and Therma-Tru – both of which manufacture Miami-Dade-approved impact-rated entry doors – we can install a product that qualifies for a wind mitigation credit on your homeowner’s insurance. The key is proper installation to the product’s NOA spec, which is exactly what we document. We can provide the installer paperwork your insurance carrier needs. Many Westgate homeowners find that the annual premium savings offset a meaningful portion of the door cost over time. Call (561) 468-6136 and we’ll walk you through what’s realistic for your home’s opening and your insurance situation – no charge for that conversation.
Why Westgate Homeowners Choose Winslow
There’s no shortage of door contractors operating in the greater West Palm Beach area. What there is a shortage of is contractors where a real, named owner is accountable for the work. Ed Winslow’s name is on the business, on the license, and on every install we do in Westgate. That’s not a marketing line – it’s a structural fact about how this company operates.
When you call (561) 468-6136 at 7 a.m. or 9 p.m., a live person picks up. Not a voicemail. Not an answering service that takes a message and promises a callback by the next business day. Someone who can actually talk through your situation, schedule a measurement visit, or help you figure out whether what you’re dealing with is a repair or a replacement.
Our Done Right Promise is the clearest expression of how Ed runs this business: if the work isn’t right, we come back and make it right. No statute of limitations on that. National chains offer 90-day workmanship windows as a fine-print afterthought. We offer accountability with no expiration date because that’s the only way to do business when your name is on the door.
We’ve been serving Westgate and neighboring communities as part of our full home exterior service area since 2011. We know which neighborhoods have older framing that tends to have moisture issues, where the wind exposure is highest, and what the local inspectors look for on permitted work. That local knowledge doesn’t come from a corporate training manual – it comes from 15 years of showing up in this market.
If you’re ready to replace your entry door, or just want an honest assessment of whether French & Double Doors or another style makes sense yet, call us. Estimates are free, pricing is upfront, and there’s no pressure to decide anything on the first visit. That’s how a neighbor operates.
Call (561) 468-6136 today to schedule your free entry door estimate in Westgate. Ed’s team is ready – and someone will actually answer.
Written by Ed Winslow, Owner at Winslow Windows & Doors, serving Westgate.
Six Reasons Homeowners Choose Winslow Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.